• 한국지리정보학회지
• /
• 제17권3호
• /
• pp.39-53
• /
• 2014

우리나라의 인구 고령화 현상은 매우 빠르게 진행되고 있으며 농촌지역의 인구 고령화가 도시지역보다 더욱 빠르게 진행되고 있다. 그러나 지금까지 인구 고령화에 관련한 정책이나 연구들은 농촌지역보다 주로 도시지역에 초점을 두고 있다. 이에 본 연구에서는 농촌지역의 고령화 문제에 대한 심각성을 일깨우고, 나아가 지역 맞춤형 인구 고령화 정책을 수립하기 위한 기초정보를 제공한다. 이를 위해 농촌지역의 인구 고령화 수준을 미시적으로 제시하고 인구 고령화 현상의 공간적 확산 패턴을 분석하였다. 분석 결과 첫째, 읍면 단위의 농촌지역에 따라 인구 고령화 수준과 공간적 확산 패턴이 각각 다르게 분석되었다. 둘째, 고령화의 시공간적 확산 측면에서 인구 고령화 지수가 높으면서 공간적으로 집중되어 있는 지역(High-High, hot spot 지역)과 지수가 낮으면서 집중되어 있는 지역(Low-Low, cold spot 지역)은 뚜렷하게 구분되었다. 이상의 분석결과를 통해, 본 연구는 지역 맞춤형 인구 고령화 정책, 특히 농촌지역의 인구 고령화 정책을 수립하는데 기여하고자 한다.

• 한국지리정보학회지
• /
• 제17권2호
• /
• pp.121-135
• /
• 2014

최근 픽셀기반분류보다 더 많은 정보를 이용할 수 있는 객체기반에 대한 연구가 활발히 진행 중이다. 따라서, 본 연구는 인제군 Demilitarized Zone(DMZ)지역 일원을 대상으로 객체기반 분류기법을 이용한 토지피복분류를 실시하였다. 분류항목은 환경부 기준의 대분류 항목 7개, 중분류 항목 13개로 선정하였고, 사용된 인자는 분광 값의 평균과 표준편차, Grey Level Co-occurrence Matrix(GLCM)의 Homogeneity를 사용하여 감독분류방법 중 최근린기법을 이용하여 계층적 토지피복도를 구축하였다. 구축된 토지피복도를 이용하여 남방한계선으로부터의 거리와 Digital elevation model(DEM)을 통해 지형특성에 따른 분류항목 별 분포 특성을 분석하였다. 객체기반 분류를 위한 최적 가중치는 Scale 72, Shape 0.2. Color 0.8, Compactness 0.5, Smoothness 0.5로 선정하였고, 가중치 선정과정에서 Scale, Shape, Color가 가장 많은 영향을 주었다. 대분류 토지피복분류는 산림, 초지, 시가지의 순으로 각각 약 92%, 약 5%, 약 2%였으며, 중분류 토지피복분류는 활엽수림, 혼효림, 침엽수림의 순으로 각각 약 44%, 약 42%, 약 6% 순으로 분포하였다. 토지피복형태에 따른 분포특성을 보면, 남방한계선으로부터 2km이내의 지역에서 공공시설 지역과 도로의 이용이 높았으며, 남방한계선 6km이상의 지역에서는 논과 밭, 나지의 형태가 많았다. 산림은 표고 600m, 경사 $30^{\circ}$이상의 지역에서는 면적분포가 높았고, 농업지역과 나지, 초지는 표고 600m, 경사 $30^{\circ}$이하의 지역에서 면적분포가 높았다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제24권7호
• /
• pp.929-939
• /
• 2011

The effects of micronization on in situ and in vitro nutrient disappearances of wheat, barley and corn were investigated in a series of experiments. In Experiment 1, chemical composition and in situ dry matter disappearance (DMD) of six varieties of wheat were determined. In addition, an in vitro study was completed using ground micronized and unmicronized wheat (var. Kansas). In Experiment 2, three varieties of wheat (Kansas, Sceptre and Laura) and in Experiment 3, three cereal grains (wheat, barley and corn) were either micronized for 1 min to attain internal kernel temperatures of 90-100$^{\circ}C$ or not (controls), and DM, protein and starch disappearances were estimated. In Experiment 2, an in vitro study was also completed using ground micronized and unmicronized wheat (var. Kansas). Wheat samples varied with respect to crude protein (10.0-21.2%), starch (61.6-73.9%), NDF (8.5-11.8%), volume weight (753-842 g/L) and kernel hardness (0.0-32.0). Rate (p = 0.003) and extent (p = 0.001) of in situ DMD differed among wheat varieties. Correlations between in situ kinetics, and chemical and physical properties of wheat varieties showed that protein content was negatively correlated with the rate of disappearance ($r^2$ = -0.77). Micronization of all grains markedly reduced (p = 0.001) the rate and extent of DM, and protein disappearances as compared to control samples. Micronization increased (p<0.05) the digestion of starch in wheat. However, release of ammonia into the incubation medium was markedly reduced (p<0.05), suggesting that micronization increased the resistance of protein to microbial digestion. Disappearances of DM, protein and starch differed (p = 0.001) among cereal grains with wheat>barley>corn. Micronization reduced the rate of DM disappearance (p = 0.011) and slowly degradable protein fractions (p = 0.03), however, increased (p = 0.004) slowly degradable starch fractions of all three cereals. Examination of in situ samples by scanning electron microscopy confirmed that microbial colonization focused on starch granules in micronized grains, and that the protein matrix exhibited resistance to microbial colonization. These results suggest that micronization may be used to increase the ruminal escape value of protein in cereal grains, but may lead to increased starch digestion if grains are finely ground.

• Journal of Animal Science and Technology
• /
• 제62권4호
• /
• pp.429-437
• /
• 2020

This study was conducted to construct basic data for the selection of elite cows by analyzing the estimated breeding value (EBV) and accuracy using the pedigree of Hanwoo cows in Gyeongnam. The phenotype trait used in the analysis are the carcass weight (CWT), eye muscle area (EMA), backfat thickness (BFT) and marbling score (MS). The pedigree of the test group and reference group was collected to build a pedigree structure and a numeric relationship matrix (NRM). The EBV, genetic parameters and accuracy were estimated by applying NRM to the best linear unbiased prediction (BLUP) multiple-trait animal model of the BLUPF90 program. Looking at the pedigree structure of the test group, there were a total of 2,371 cows born between 2003 to 2009, of these 603 cows had basic registration (25%), 562 cows had pedigree registration (24%) and 1,206 cows had advanced registration (51%). The proportion of pedigree registered cows was relatively low but it gradually increased and reached a point of 20,847 cows (68%) between 2010 to 2017. Looking at the change in the EBV, the CWT improved from 4.992 kg to 9.885 kg, the EMA from 0.970 ㎠ to 2.466 ㎠, the BFT from -0.186 mm to -0.357 mm, and the MS from 0.328 to 0.559 points. As a result of genetic parameter estimation, the heritability of CWT, EMA, BFT, and MS were 0.587, 0.416, 0.476, and 0.571, respectively, and the accuracy of those were estimated to be 0.559, 0.551, 0.554, and 0.558, respectively. Selection of superior genetic breed and efficient improvement could be possible if cow ability verification is implemented by using the accurate pedigree of each individual in the farms.

• Applied Biological Chemistry
• /
• 제46권1호
• /
• pp.60-65
• /
• 2003

피부노화는 크게 생리적 노화(chmnological aging)와 광노화(photoaging)로 나누어 진다. 진피세포와 표피세포에서 광노화는 MMP(Matrix metalloproteinase)의 분비량이 증가하면서 MMP와 TIMP(Tissue inhibitors of metalloproteinase)의 균형을 깨뜨려 진피층을 붕괴가 유도된다. 본 연구는 광노화 및 암 전이 과정, 관절염 등 여러 질병에서 주목받고 있는 MMP-1의 생성 억제활성물질을 120여종의 식용식물(edible plants)로부터 활성물질을 분리, 정제하고 정제물질의 일부 물리화학적 성질을 규명하였다. 표피세포(HaCaT)와 진피세포(HS68) 세포주를 이용하여 다양한 강도의 UVB를 조사하여 생성되는 MMP-1의 양과 감수성을 검토한 결과 HS68에서 UVB의 조사량에 비례하여 MMP 분비량이 증가되는 반면, HaCaT세포의 MMP 분비량은 유의적 차이를 보이지 않았다. MMP-1 생성량이 가장 높은 UVB 조사량은 35 $mJ/cm^2$ 내외이었고, UVB조사 후 분비되는 MMP-1의 양은 36-48시간대에 가장 높게 나타났다. MMP-1의 생성 억제활성을 검색한 결과 아가위(Crataegus pinnatifida Bunge)의 냉수분획층(CP)에서 최대활성을 나타내었다. CP를 periodate 산화 처리에서는 변화가 없으나 pronase 처리시 활성이 감소되는것으로 단백질이 활성의 본체임을 확인하였다. 정제는 CP의 ultrafiltration처리, DEAE-Tayopearl 650c, Butyl-Tayopearl 650M의 이온교환크로마토그래프와 Bio-Gel P-30겔 여과 크로마토그래프 통해서 MMP-1 억제 활성 분획층 CP-2Va-2를 정제하였다. CP-2Va-2의 MMP-1억제활성은 88.5%이었으며, 분자량은 HPLC로 확인한 결과 19kDa, SDS-PAGE에서는 20 kDa 확인됨으로써 monomer구조임을 알 수 있었다.

• Composites Research
• /
• 제12권3호
• /
• pp.84-90
• /
• 1999

HAC/PVA계 MDF시멘트 복합재료의 수분안정성 및 기계적 강도향상을 위하여 불용성 폴리머류(폴리우레탄, 페놀, 에폭시수지)와 탄소섬유(길이3mm)를 1-4wt% 보강하였다. 그리고 가압성형법으로 제조한 복합체의 수분침적 기간별 강도특성(수분안정성)과 계면 및 기계적 특성에 영향을 미치는 폴리머와 시멘트의 가교반응에 대하여 SEM 및 TEM 분석을 통하여 관찰하였다. HAC/PVA계 MDF 시멘트 복합체의 섬유함량에 따른 건조 굽힘강도는 섬유함량이 증가할수록 치밀화 구조가 저하되어 비례적으로 감소되었다. 또한 불용성 폴리머류를 사용한 경우에 건조 굽힘강도는 섬유함량이 증가될수록 저하되는 반면, 수분안정성은 크게 향상되었다. 에폭시 수지를 첨가한 경우에 수분안정성이 가장 우수하였으며, 섬유함량 4% 첨가의 경우에 3일 침적강도가 95%, 7일침적시 87%강도를 유지하였다. 이 점은 폴리머와 시멘트의 금속이온이 가교반응을 일으켜 섬유-메트릭스간 계면 부착강도를 크게 개선되었기 때문으로 추정된다. 반면 인장강도 특성은 모든 불용성 폴리머류 첨가 수준에서 섬유 함량이 증가할수록 비례적으로 증가되었으며, 역시 에폭시 수지 첨가의 경우에 강도특성이 가장 우수하였다. 그리고 섬유함량 4% 첨가된 경우에 있어서 인장강도는 섬유함량 0% 대비 약 30~80% 높게 나타났다.

• Applied Microscopy
• /
• 제23권1호
• /
• pp.35-55
• /
• 1993

cis-Dichlorodiammineplatinum (II) (cis-Platin), a metallic compound, has widely been used as an effective anticancer chemotherapeutic agent. The precise mechanism of action of this agent is still unknown, but it is postulated that cis-Platin may act on the cancer cell like bifunctional alkylating agents. Although this agent is very beneficial to the patients with cervical cancer, germinoma of testis, neuroblastoma and others, it may also damage to the normal cell so that many side effects; severe hemorrhagic enterocolitis, bone marrow depression, renal damage and liver damage will develope. This experiment has been undertaken to pursue the cytotoxic effects of the cis-Platin on the ultrastructures of the interalveolar septum in the mouse lung. A total of 55 healthy male mice of ICR strain were used as experimental animals and divided into 5 mice of normal control group and 50 mice of cis-Platin treated group. The mice of cis-Platin treated group were sacrificed by carotid exsanguination at 6, 12, 24 hours, 3 days and 7 days after intraperitoneal injection of 6.0 mg of cis-Platin ($Abiplatin^R$ Abic Co. Ltd.) per kg of mouse body weight. The specimen obtained from the lower lobe of left lung were sliced into $1mm^3$ and prefixed with 2% glutaraldehyde -2.5% paraformaldehyde solution prepared with Millonig's phosphatae buffer solution (pH 7.4) at $4^{\circ}C$ for 3-4 hours. After postfixation with 1% osmium tetroxide solution all specimens were embedded in Epon 812. Ultrathin sections about $600-800{\AA}$ in thickness were stained with uranyl acetate and lead citrate and observed with Hitachi-600 electron microscope. The results obtained were as follows: 1. Local swellings with increase of electron density and number of pinocytic vesicles in the cytoplasms of the type I pneumocyte and endothelial cell of the blood air barrier in interalveolar septum of cis-platin treated mice were observed. 2. Cisternae of rough endoplasmic reticulum were dilated and sacculated in association with detachment of membrane bound ribosomes of the type II pneumocyte in interalveolar septum of cis-Platin treated mice. 3. Swollon mitochondria with uneven electron density of their matrix were observed in the type II pneumocyte of interalveolar septum in the cis-Platin treated mice. 4. The lamellae of lammelar bodies in type II pneumocyte of interalveolar septum in cis-Platin treated mice were devoided or transformed into homogeneous electron dense material. It is consequently suggested that cis-Platin would induce the cellular edema of type I pneumocyte and endothelial cell, and degenerative changes of cytoplasmic organelles of the type II pneumocyte in the interalveolar septum of the mouse lung.

• Fisheries and Aquatic Sciences
• /
• 제22권12호
• /
• pp.31.1-31.12
• /
• 2019

Background: The black-chinned tilapia, Sarotherodon melanotheron, is the most abundant fish species in the Nakwa (an open lagoon) and Brenu (a closed lagoon) in the Central Region of Ghana. Aspects of the life history characteristics and the ecology of the fish populations in both lagoons were studied to assess the bio-ecological status of this important resource. Methods: Fish samples were obtained from fishermen that fish on the Nakwa and Brenu lagoons using cast, drag and gill nets. The age of the fish was assessed from otoliths analysis and its growth modelled following the von Bertalanffy growth function. Morphometric characteristics of the fish populations were analysed using power regression and ANOVA for parameters comparisons, and Student's t test to determine whether species grew isometrically. The percentage occurrence method was used to analyse the stomach contents of the fish. Results: A total of 382 fish samples from both lagoons were measured, comprising 209 from Nakwa lagoon and 176 from Brenu lagoon. The size and weight of fish samples ranged between 3.9-11.5 cm total length and 1.0-27.3 g for Nakwa Lagoon and 5.6-12.8 cm total length and 3.2-29.8 g for the Brenu Lagoon. The estimated von Bertalanffy growth parameters were L∞ = 12.04 cm and K = 2.76/year for the Nakwa Lagoon samples and L∞ = 13.44 cm and K = 3.27/year for Brenu Lagoon samples. Daily otolith incremental rate ranged from 0.01-0.03 mm per day to 0.01-0.02 mm per day for Nakwa and Brenu lagoons, respectively. Stomach content analysis of the fish samples revealed that the species are planktivorous and the range of food varied between the lagoons. Green algae were the most prevalent food item in the stomachs of the fish samples from Nakwa with the frequency of 69% whilst diatoms (80.5%) were most prevalent phytoplanktonic food item for the fish in Brenu lagoon. Conclusions: The estimates of asymptotic length for the species in both lagoons are close to known values of the species length at first sexual maturity and points to intensive fishing pressure. As a consequence, a comprehensive sample-based survey is required in both lagoons to derive estimates of management reference points. The results of the stomach content analysis are beneficial to the construction of diet matrix for ecosystem models of the two systems.

• Elastomers and Composites
• /
• 제49권1호
• /
• pp.43-52
• /
• 2014

브롬화 이소부틸 이소프렌 (BIIR) 고무의 점착성에 미치는 나노점토(Cloisite 20A)의 영향을 조사하였다. 고무내 나노점토의 분산성은 SEM, TEM, XRD으로 분석하였다. 나노점토 충전 및 미충전 고무의 열적안정성은 TGA로 분석하였으며, 충전고무에서 열적안정성을 보였다. 또한 나노점토를 첨가하면 보강효과에 의해 고무의 강도가 증가하였다. 나노점토 첨가로 계면간 분자확산 정도는 감소할 것으로 판단되었지만, 본 연구에서 관찰된 분자확산에 의해 형성된 계면의 두께는 분자사슬간 엄킴현상을 유발하는데 충분하여 계면점착력이 증가하는 것으로 나타났다. 계면점착력 증가현상은 일정한 이상 (8 phr)의 나노점토가 첨가되었을 때 나타났다. 나노점토 첨가에 따른 표면특성의 변화를 조사하기 위해 접촉각 측정을 하였는데 큰 변화는 관찰되지 않았다.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2002년도 Proceedings of the International Welding/Joining Conference-Korea
• /
• pp.235-243
• /
• 2002

Ni-base superalloys are used extensively in industry, both in aeroengines and land based turbines. About 60% by weight of most modern gas turbine engine structural components are made of Ni-base superalloys. To satisfy practical demands, the efficiency of gas turbine engines has been steadily and systematically increased by design modifications to handle higher turbine inlet or firing temperatures. However, the increase in operating temperatures has lead to a decrease in the life of components and increase in costs of replacement. Moreover, around 80% of the large frame size industrial/utility gas turbines operating in the world today were installed in the mid-sixties to early seventies and are now 25 to 30 years old. Consequently, there are greater opportunities now to repair and refurbish the older models. Basically, there are two major factors influencing the weldability of the cast alloys: strain-age cracking and liquation cracking. Susceptibility to strain-age cracking is due to the total Ti plus AI content of the alloy; Liquation cracking is due either to the presence of low melting constituents or constitutional liquation of constituents. Though Rene 41 superalloy has 4.5wt.% total Ti and Al content and falls just below the safe limit proposed by Prager et al., controlled grain size and special heat treatments are needed to obtain crack-free welds. Varying heat treatments and filler materials were used in a laboratory study, then the actual welding of service parts was carried out to verity the possibility of crack-tree weld of components fabricated from Rene 41 superalloy. The microstructural observations indicated that there were two kinds of carbides in the FCC matrix. MC carbides were located along the grain boundaries, while M$_{23}$C$_{6}$ carbide was located both inter and intra granularly. Two kinds of filler materials, Rene 41 and Hastelloy X were used to gas tungsten arc weld a patch into the sheet metal, along with varying pre-weld heat treatments. The microstructure, hardness and tensile tests were determined. The service distressed parts were categorized into three classes: with large cracks, with medium cracks and with small or no visible cracks. No significant difference in microstructure among the specimens was observed. Specimens were cut from the corner and the straight edge of the patch repair, away from the corner. The only cracks present were found to be associated with inadequate surface preparation to remove oxidation. Guidelines for oxide removal and the welding procedures developed in the research enabled crack-free welds to be produced.d.