• Journal of the Korea Furniture Society
• /
• v.26 no.3
• /
• pp.222-228
• /
• 2015

To evaluate the natural decay durability of valuable domestic softwoods which are used for preservative treatment in our country, we carried out decay test by European standard method. Of all test wood species, Japanese larch (Larix leptolepis) showed slightly high natural decay durability compared to other 4 wood species, Japanese red pine (Pinus densiflora), pitch pine (Pinus rigida), Japanese cedar (Cryptomeria japonica), and scots pine (Pinus sylvestris). However, all of evaluated domestic softwood species in this study caused high weight losses over about 30% in heartwood by test fungus, Poria placenta. We can hardly expect a good natural decay durability from these softwood species. According to the classification of the natural durability of European standard (EN 350-1), they are classified into "Not durable" or "Slightly durable". Therefore, if using these softwoods as exterior materials, we must do preservative treatment to ensure durability.

• Textile Coloration and Finishing
• /
• v.9 no.6
• /
• pp.10-17
• /
• 1997

In order to improve the anti-static property of several hydrophobic fibers by sputter etching, polyester, polypropylene and poly(p-phenylene sulfide) have been etched by sputtering in the presence of argon gas and the resulting anti-static property investigated by half time decay, the time of water permeation, weight loss rate and scanning electron microscope(SEM). The temporary change and durability of anti-static property of samples treated with sputter etching were evaluated. The results were as follows; 1) Half time decay of samples treated with sputter etching were decreased about 18~38%. According to increasing sputter etching time, half time decay is decreased. 2) The wettability and weight loss rate of treated samples were increased remarkably. According to the SEM photographs, many microcraters on the substrate surface by the sputter etching were observed. 3) Although the washing treatment and the time elapsed after treatment are allowed longer, the variation of half time decay hardly can find.

• Applied Biological Chemistry
• /
• v.40 no.2
• /
• pp.117-122
• /
• 1997

The conditions of cold storage of Citrus unshiu Marc. var. miyagawa produced in Cheju were investigated. Compared to the citrus fruits stored at room temperature, the content of soluble solids, total sugar, vitamin C and specific gravity decreased slightly on the fruits stored at $4^{\circ}C$ and 87% relative humidity. Decay ratio and weight loss were below 10% on keeping freshness relatively till late of March during cold storage. Weight loss, decrease of firmness and soluble solids occured gradually during cold storage. Nevertheless seal-packaging with 0.02 mm LDPE film or wax-coating of citrus fruits were effective on weight loss and appearance, decay ratio increased for long-term storage. It was needed to control humidity in cold chamber for preventing from decay and weight loss. Edible part ratio was decreased gradually by respiration, and peel and tissue of fruits were softened slightly by 60 days of cold storage. Decay ratio and weight loss of full-ripened citrus fruits were little during the storage for 100 days, compared to the fruits harvested early. Appearance and taste of citrus fruits stored for 4 month were good relatively, but decay occured rapidly on seal-packaging fruits putting out of cold room for a few days. Because of the difficulty of long-term storage for early variety of Citrus unshiu, the conditions and periods of cold storage would be determined after considering the physicochemical properties of fruits.

• Journal of the Korean Wood Science and Technology
• /
• v.23 no.4
• /
• pp.54-59
• /
• 1995

This experiment was carried out to evaluate the role of oxalic acid metabolism in the incipient decay of brown rotting, and to investigate the effects of various compositions of culture medium. Until 5days incubation, the amount of oxalic acid produced by Tyromyces palustris was increased, while pH was gradually decreased. The difference in oxalic acid production depending on carbon sources was not significant and the pH adjustment of media did not stimulate the production of oxalic acid. In this experiment, hemicellulose was hydrolyzed with 1% oxalic acid, so it is suggested that nonenzymatic acid hydrolysis of hemicelluloses might be involved in the process of incipient decay of brown-rot fungi.

• Journal of the Korean Wood Science and Technology
• /
• v.15 no.2
• /
• pp.16-25
• /
• 1987

This study was carried out under controlled laboratory conditions in order to investigate the relative durability to decay of 6 Quercus species. The relative durability to decay was expressed by the percentage of weight loss by Lentinus edodes and Pleuratus ostreatus. The results obtained could be summarized as follows: 1. The most decay-resistant parts by L. edodes were heart wood of Q. sarrata TH. and sap wood of Q. aliena BL. and the least decay-resistant parts were heart wood of Q. acutissima C. and sap wood of Q. dentata TH.. 2. The most decay-resistant parts by P. osteratus were heart wood of Q. serrata TH. and sap wood of Q. aliena BL. and the least decay-resistant parts were heart wood of Q. variabilis BL. and sap wood of Q. dentata. TH.. 3. The percentage of weight loss in 6 Quercus species by section-height was not a consistent variation. 4. Putting these results together, Quercus aliena BL, could be regarded as the most decay-resistant by L. edodes and P. osteratus under normal condition among 6 Quercus species.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.04c
• /
• pp.69-72
• /
• 2008

Decay processes of accumulated charge in e-beam irradiated polymers during elevating temperature are observed using pulsed electro-acoustic measurement system. Since the polymeric materials have many superior properties such as light-weight, good mechanical strength, high flexibility and low cost, they are inevitable materials for spacecrafts. In space environment, however, the polymers sometimes have serious damage by irradiation of high energy charged particles. When the polymers of the spacecraft are irradiated by high energy charged particles, some of injected charges accumulate and remain for long time in the bulk of the polymers. Since the bulk charges sometimes cause the degradation or breakdown of the materials, the investigation of the charging and the decay processes in polymeric materials under change of temperature is important to decide an adequate material for the spacecrafts. By measuring the charge behavior in e-beam irradiated polymer, such as polyimide or polystyrene, it is found that the various accumulation and decay patterns are observed in each material. The results seem to be useful and be helpful to progress in the reliability of the polymers for the spacecraft.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.329-330
• /
• 2007

Decay processes of accumulated charge in e-beam irradiated polymers during elevating temperature are observed using pulsed electro-acoustic measurement system. Since the polymeric materials have many superior properties such as light-weight, good mechanical strength, high flexibility and low cost, they are inevitable materials for spacecrafts. In space environment, however, the polymers sometimes have serious damage by irradiation of high energy charged particles. When the polymers of the spacecraft are irradiated by high energy charged particles, some of injected charges accumulate and remain for long time in the bulk of the polymers. Since the bulk charges sometimes cause the degradation or breakdown of the materials, the investigation of the charging and the decay processes in polymeric materials under change of temperature is important to decide an adequate material for the spacecrafts. By measuring the charge behavior in e-beam irradiated polymer, such as polyimide or polystyrene, it is found that the various accumulation and decay patterns are observed in each material. The results seem to be useful and be helpful to progress in the reliability of the polymers for the spacecraft.

• Food Science and Preservation
• /
• v.2 no.1
• /
• pp.195-202
• /
• 1995

An experiment was conducted to develop the simple methods of ginger storage which decrease the weight reduction and maintain good quality of ginger during the cellar storage. The stored boxes with volume of 0.03㎥ and ventilator diameter of 3, 4, 5cm was hurried under the ground(60, 80, 100cm) in the green house. During the cellar storage at the 100cm depth the average temperature and relative humidity in the stored box were remained in 11.7~16.3$^{\circ}C$ and 73%, respect. The higher storage amount and smaller size of ventilator size increased the CO2 concentration in the stored box, and the concentration in the stored box with 50% storage quantity rate and 3cm ventilator diameter size was more than 10% for about 2 months from early Feburary. The decay rate of ginger during the cellar storage increased with higher amount of storage quantity and smaller size of ventilator. The CO2 concentration was low and remained relatively constant with the deeper location of stored box under the ground, and the decay rate was lower in the deeper stored box. Germination rate increased with the deeper location of stored box, and with the lower storage quantity and larger ventilator size. The germination rate was low in the higher decay rate box. Weight loss, total sugar and moisture contents of ginger were decreased, while crude fiber and ash were increased during the storage.

• Korean Journal of Food Science and Technology
• /
• v.18 no.1
• /
• pp.6-10
• /
• 1986

Fumigation of onion bulbs with Tetrachloroisophthalonitrile reduced weight loss by half of the control. The weight losses of the control onion bulbs stored at 80% RH were lower than those stored at 90% RH but no significantly different in case of fumigated onion bulbs. No rooting and sprouting to outside were detected during low temperature storage ($0^{\circ}C$) and $Q_{10}$ value of onion bulbs during storage was the range of 1.9-2.1. The weight losses of onion bulbs during storage were mainly due to decay rather than respiration, because there was positive correlation between weight loss and decay rate during storage period but not respiration ratio.

• Journal of the Korean Wood Science and Technology
• /
• v.24 no.3
• /
• pp.18-27
• /
• 1996

The feasibility of using stress-wave technique in the transverse direction for the assessment of early stages of decay was investigated using compression test specimens having different annual ring orientations subjected to decay by Tyromyces palustris for various time intervals. Decay detection, quantitative assessment of decay, and the prediction of residual strength of decayed wood with less than five percent weight loss can be feasible using stress-wave parameters (wave velocity, wave impedance, and stress-wave elasticity) and their percent reduction due to decay, measured by stress-wave technique in the transverse direction. The use of stress-wave technique in the transverse direction for the application of this technique to structural members in service is desirable, when considering the easiness of attachment of accelerometers of stress-wave measuring device on the surface of members and also accurate detection of localized decayed areas. In stress-wave technique in the transverse direction, stress-wave parameters measured were different according to the angles between wave propagation path and annual ring, due to the anisotropy of wood structure. Therefore, it is recommended to use percent reduction in stress-wave parameters instead of stress-wave parameters. This evaluation method using percent reduction in stress-wave parameters is ideal when it is impossible to observe annual ring orientation on the transverse surface of wood.