• 한국안전학회지
• /
• 제33권4호
• /
• pp.46-53
• /
• 2018

This study examined the maximum resistant moment and nonlinear rotational stiffness of wedge joint between the vertical and horizontal members of system supports. To examine the maximum resistant moment and propose the nonlinear rotation stiffness of wedge joint, 6 specimens were tested and additional 3 specimens, where the horizontal member was welded to the vertical member, were tested to compare the moment capacity of wedge joints. The average maximum moment in the tested wedge joint was 1.183 kNm which represented about 70 % of the maximum moment developed in the welded specimens. And, as simulating nonlinear rotational stiffness of the wedge joint, a tri-linear model was suggested. The rotational stiffness was estimated as 23.095 kNm/rad in first stage, 7.945 kNm/rad in second stage, and 3.073 kNm/rad in third stage. For the failure mode, the specimen with the wedge joint showed the failure of joint between vertical and horizontal members. However, the specimen with welded joint represented the yielding of horizontal members.

• 국제물리치료학회지
• /
• 제7권2호
• /
• pp.1025-1030
• /
• 2016

The purpose of this study was to investigate the effects of combined wedge on the range of motion in ankle and knee joint, ankle eversion moment and knee adduction moment, and center of pressure excursion of foot for genu varus among adult men during gait. This study was carried out with 10 adult men for genu varus in a motion analysis laboratory in J university. The subjects of the experiment were measured above 5cm width between the knees on contact of both medial malleolus of ankle while standing. The width of their knees in neutral position was measured without the inversion or eversion of the subtalar joint by the investigator. The subjects of the experiment were ten who were conducted randomly for standard insole, insole with $10^{\circ}$ lateral on rear foot wedge, insole at $10^{\circ}$lateral on rear foot and $5^{\circ}$ medial on fore foot wedge. Before and after intervention, changes on the range of motion in ankle and knee joint, ankle eversion moment and knee adduction moment, and center of pressure excursion were measured. In order to compare analyses among groups; repeated one-way ANOVA and $Scheff{\acute{e}}$ post hoc test were used. As a result, combined wedge group was significantly decreased compared to control wedge group in terms of knee varus angle in mid-stance(p<.05). Combined wedge group was significantly decreased compared to lateral wedge group in terms of ankle eversion moment in whole stance(p<.05). Combined wedge group was significantly decreased compared to lateral wedge group in terms of knee adduction moment in whole stance(p<.05). Combined wedge group was significantly decreased compared to lateral wedge in terms of center of pressure excursion in whole stance(p<.05). The results of this study suggest that combined wedge for genu varus decreased ankle eversion moment and knee adduction moment upon center of pressure excursion. We hypothesize that combined wedge may also be effective in the protection excessive ankle pronation.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1994년도 봄 학술발표회 논문집
• /
• pp.19-24
• /
• 1994

Four types of horizontal joint were tested to investigate the difference with regards to the compressive behavior and strength. These include wedge-type joints (i)with and (ii)without transverse reinforcement against splitting failure of the panel concrete, and wedge-type joints (iii)with different widths of joint concrete (6cm vs 8cm) and (iv)closed platform joint. It was shown that the compressive strength of wedge-type joint is about 10% higher than that of closed-type (platform) joint. But the effect of transverse reinforcement and joint concrete widths on the strength of the joints turned out be negligible. Also, the moduli of elasticity in panel and joint are compared and the equivalent moduli of the whole wall are derived.

• 한국추진공학회지
• /
• 제4권3호
• /
• pp.64-73
• /
• 2000

본 체결부는 필라멘트 와인딩으로 제작된 연소관, 복합재 쐐기 그리고 알루미늄 내부 링으로 구성된다. 여기서 연소관은 헬리컬 층과 후프 층으로 이루어져 있다. 이러한 복합재 연소관의 성능 향상을 위해 체결부의 설계 변수에 따른 유한 요소 응력 해석이 수행되었다. 이때 접착 층을 난-소성 거동 재질로, 쐐기부와 알루미늄 링간의 접촉 상태는 ABAQUS의 접촉 표면 요소로 모사 되었다. 또한 해석 결과의 정확성을 입증하기 위해 내압에 의한 체결부 밀림 변위와 연소관 몸체의 원주 방향 변형도를 수압 시험과 비교하였다. 쐐기와 알루미늄 링간의 완벽 접착은 쐐기와 연소관간의 접착 층에 높은 전단 변형을 발생시켜 체결부 조기 파괴의 원인이 된다. 쐐기와 알루미늄 링간의 미 접착은 쐐기와 연소관사이의 접착 층 전단 응력을 감소시키는 반면 내부 알루미늄 링의 미끄러짐 거동으로 체결부 복합재의 반경 방향 변형을 증가시켜 파괴를 유발하였다. 그러나 쐐기부와 알루미늄 링간의 미접착 상태에서, 원주 방향 와인딩으로 체결부 지점을 보강한 경우, 알루미늄 링의 미끌어짐이 억제되어 체결부 지점의 복합재 원주 방향 변형값이 감소했다.

• 한국융합학회논문지
• /
• 제11권2호
• /
• pp.53-60
• /
• 2020

본 논문은 손목 후전, 측방향 검사 시 손목을 지지하여 자세 변동을 최소화 시킬 수 있는 경사보조도구에 대해 영상 평가하고자 한다. 50명을 대상으로 일반적 검사(수직), 튜브 각도(후전방향:10°, 측방향:20°)와 경사보조도구(수직)를 이용한 손목 후전, 측방향 영상을 획득하여 먼쪽 노뼈 관절면과 손목 뼈와의 간격을 측정하였다. 손목의 후전, 측방향 영상에서 관절 간격을 측정 하였을때 일반적 검사(5.54mm, 9.42mm), 튜브 각도(2.05mm, 5.07mm) 그리고 경사보조도구(1.79mm, 5.46mm) 순으로 관절 간격이 작게 나타났다. 관절 간격이 작을수록 열려진 관찰이 용이하다. 따라서 경사보조도구를 이용한 손목의 후전, 측방향 촬영은 영상의 왜곡을 감소시켜 진단적 가치가 높은 영상을 획득할 수 있고, 재촬영 시 환자 자세 변동에 따라 발생할 수 있는 편차를 감소시킬 수 있을 것으로 사료된다.

• 터널과지하공간
• /
• 제29권5호
• /
• pp.332-345
• /
• 2019

평사투영도에서 불연속면을 대표하는 유일한 점으로 정의되는 최대경사벡터를 해당 면의 경사와 경사방향에 의거하여 형성하였다. 평사투영해석에서 평면의 극점이 대원과 역방향에 제도되는 것에 비해 최대경사벡터는 대원의 최대 경사지점에 위치하여 불연속면의 미끄러짐 방향을 직접 투영도 상에서 지시한다. 투영도 상에서 불연속면의 거동방향을 직접적으로 지시하는 최대경사벡터를 활용하여 평면 및 전도파괴 양상을 직관적으로 확인하였다. 특히 평면 파괴의 경우 블록의 옆면을 형성하는 고 경사 절리의 존재를 확인하여 실제 미끄러짐 블록의 형성가능성을 산정하였다. 또한 사면 방향과 반대방향을 갖는 고경사절리들의 존재를 확인하여 3각형 단면을 갖는 미끄러짐 블록의 형성여부를 판별하고 안전율을 도출하였으며, 4각형 단면을 갖는 가장 취약한 블록의 안전율과 비교분석하였다. 쐐기파괴 경우에는 절리면 교차에 의해 형성되는 쐐기의 기저선 방향이 최대경사벡터 속성을 지니고 있어 쐐기파괴 영역을 평면 및 전도파괴 영역이 제도된 투영도 상에 함께 도시하여 분석을 수행하였다. 특히 쐐기 상부 면을 형성하는 절리를 추출할 수 있어 전체 쐐기형상을 추정하고 역학적 거동분석을 수행하는데 요구되는 쐐기의 기하학적 특성자료를 도출하는 토대를 확립하였다.

• 대한관절경학회:학술대회논문집
• /
• 대한관절경학회 2008년도 춘계 공동 학술대회
• /
• pp.123-124
• /
• 2008

• 대한족부족관절학회지
• /
• 제8권2호
• /
• pp.142-148
• /
• 2004

Purpose: We compared the results of three surgical procedures of the old neglected Freiberg's disease that was managed with metatarsal head reshaping, metatarsal head resection, and dorsal closing wedge osteotomy. Materials and Methods: From march 1996 to July 2002, five cases in six patients whose metatarsal head collapse already progressed underwent operative treatment. We compared the operative results in the view point of the radiographic follow-up and lesser toe metatrasophalangeal joint scale of AOFAS. Results: There were no further joint destruction and loose body formation. Also, lesser toe metatrasophalangeal joint scale of AOFAS improved from average score, 38.5 (range $22{\sim}49$) of preoperative one to average score, 86.6 (range, $72{\sim}100$). Especially, the 2 cases that underwent dorsal closing wedge osteotomy showed most favorable result and the 2 cases with metatarsal resection showed next favorable result. The 2 cases with intra-articular loose body removal and metatarsal reshaping showed the least effective result among three operative methods. Conclusion: Our Operative experiences of old neglected Freiberg's disease were all satisfactory irrespective of operative options and dorsal closing wedge osteotomy was thought to be most effective method.

• 대한족부족관절학회지
• /
• 제9권1호
• /
• pp.59-63
• /
• 2005

Purpose: To present the procedure and results of dorsal wedge osteotomy fixated by bioabsorbable polyglycolide pins for the treatment of symptomatic Freiberg's disease. Materials and Methods: From January 1997 to December 2002, six patients with Freiberg's disease underwent dorsal wedge osteotomy of the metatarsal neck to bring the healthy plantar part of the metatarsal head into articulation. Bioabsorbable polyglycolide pins were used for the fixation and short-leg walking cast was applied for 4 weeks. Results: All patients returned to full daily activities without pain in three months after the operation. Radiographically, solid healing of the osteotomy was observed at average ten weeks. The active range of motion of the metatarsophalangeal joint increased by a mean gain of 30 degrees, and no complication such as displacement, osteolysis or sinus formation was observed. Conclusion: Dorsal wedge osteotomy fixated by bioabsorbable pins for patients with symptomatic Freiberg's disease is effective procedure that provides relatively early range of motion exercise and avoids second procedure for implant removal.

• 대한족부족관절학회지
• /
• 제9권1호
• /
• pp.87-93
• /
• 2005

Purpose: We conducted this study to examine the clinical results of the proximal metatarsal wedge osteotomy using a single screw fixation and the distal soft tissue procedure in patients with moderate to severe hallux valgus deformity. Materials and Methods: Between February 2002 and February 2004, we performed these procedures on 12 patients (15 cases). The 6 cases of all patients had mild to moderate instability in the first MTC (metatarsocuneiform) joint. We estimated the clinical outcomes, the radiological findings and complications. Results: AOFAS score was improved from preoperative 41.5 points to 87.7 points lastly on average. The mean correction angle of HVA and IMA was $23.8^{\circ}$ and $6.6^{\circ}$, respectively. The mean position of tibial sesamoid was 2.67 before surgery and 0.87 after surgery. The mean shortening of the first metatarsal bone was 3.07 mm after surgery. There was no pain and complications on the first MTC joint except the breakage of screw in one case and instability of the first MTC joint was improved postoperatively. Conclusion: We obtained good clinical and radiographic outcomes in our series. So, proximal metatarsal wedge osteotomy using a single screw fixation and distal soft tissue procedure seems one of the good surgical treatments for moderate hallux valgus deformity.