• Journal of Biosystems Engineering
• /
• v.43 no.4
• /
• pp.426-439
• /
• 2018

Purpose: To continuously monitor soil and climatic properties, a data acquisition system (DAQ) was developed and tested in plum farms (Gyewol-ri and Haechang-ri, Suncheon, Korea). Methods: The DAQ consisted of a Raspberry-Pi processor, a modem, and an ADC board with multiple sensors (soil moisture content (SEN0193), soil temperature (DS18B20), climatic temperature and humidity (DHT22), and rainfall gauge (TR-525M)). In the laboratory, various tests were conducted to calibrate SEN0193 at different soil moistures, soil temperatures, depths, and bulk densities. For performance comparison of the SEN0193 sensor, two commercial moisture sensors (SMS-BTA and WT-1000B) were tested in the field. The collected field data in Raspberry-Pi were transmitted and stored on a web server database through a commercial communications wireless network. Results: In laboratory tests, it was found that the SEN0193 sensor voltage reading increased significantly with an increase in soil bulk density. A linear calibration equation was developed between voltage and soil moisture content depending on the farm soil bulk density. In field tests, the SEN0193 sensor showed linearity (R = 0.76 and 0.73) between output voltage and moisture content; however, the other two sensors showed no linearity, indicating that site-specific calibration is important for accurate sensing. In the long-term monitoring results, it was observed that the measured climate temperature was almost the same as website information. Soil temperature information was higher than the values measured by DS18B20 during spring and summer. However, the local rainfall measured using TR 525M was significantly different from the values on the website. Conclusion: Based on the test results obtained using the developed monitoring system, it is thought that the measurement of various parameters using one device would be helpful in monitoring plum growth. Field data from the local farm monitoring system can be coupled with website information from the weather station and used more efficiently.

• International journal of advanced smart convergence
• /
• v.8 no.3
• /
• pp.69-77
• /
• 2019

Today, most of elevators have an emergency call facility for emergency situations. However, if the network installed in the elevator is also out of power, it cannot be used for the elevator remote monitoring and management. So, we develop an integrated and unified emergency call system, which can transmit not only telephone call but also data signals using PSTN(Public Switched Telephone Network) in order to remote monitoring and management of elevators, even though a power outage occurs. The proposed integrated emergency call system to process multiple data such as voice and operational information is a multi-channel board system which is composed of an emergency phone signal processing module and an operational information processing module in the control box of elevator. In addition, the RMS(remote management server) systems based on the Web consist of a dial-up server and a remote monitoring server where manages the elevator's operating information, status records, and operational faults received via the proposed integrated and unified emergency call system in real time. So even if there's a catastrophic emergency, the proposed RMS systems shall ensure and maintain the safety of passengers inside the elevator. Also, remote control of the elevator by this system should be more efficient and secure. In near future, all elevator emergency call system need to support multifunctional capabilities to transmit operational data as well as phone calls for the safety of passengers. In addition, for safer elevators, it is necessary to improve them more efficiently by combining them with high-tech technologies such as the Internet of Things and artificial intelligence.

• Journal of Appropriate Technology
• /
• v.7 no.1
• /
• pp.26-32
• /
• 2021

In the process of vaccine delivery and vaccination, temperature is mostly controlled by an insulated containers containing ice. Moreover, amount of wasted vaccine is significant because the temperature of the vaccine is not properly controlled. A core challenge of vaccination is temperature data monitoring, since it is critical for managing and operating strategical vaccination by health organizations. In this research, a real-time monitoring vaccine carrier system was developed. Temperature, location, and power consumption data of the vaccine carrier were monitored and working performances of the vaccine carrier were tested in both Korea and Tanzania (Arusha and Kilimanjaro regions). For both places, Short Message Service (SMS) communication method was used to send information of the carrier's status. As a result, the monitoring system was able to transmit and receive real-time data of the vaccine carrier status while the vaccine carrier was tested. The vaccine status data can be accessed from any location through the cloud server and web-based user interface.

• Journal of Astronomy and Space Sciences
• /
• v.21 no.4
• /
• pp.441-452
• /
• 2004

Nowcast and forecast based on realtime data are quite essential for space weather monitoring. We have developed the web pages (http://sun.kao.re.kr) of the KAO Space Weather Monitoring system by using ION (IDL on the Net). They display latest solar and geomagnetic data, and present their expected effects on satellite, communications and ground power system. In addition, daily NOAA/SEC prediction reports on the probability of solar X-ray flares, proton events and geomagnetic storms are provided. To predict the arrival times of interplanetary shocks and CMEs, two different types of prediction models are also implemented. A work is in progress to develop web-based database of several solar and geomagnetic activities. These data are automatically downloaded to our data server in every minute, or every day using IDL and FTP programs. In this paper, we will introduce more details on the development of the KAO Space Weather Monitoring system.

• The KIPS Transactions:PartD
• /
• v.8D no.4
• /
• pp.427-438
• /
• 2001

Recently, Environmental Control Devices of Green House for Protected Cultivation is composed of on/off-type Controller to control each device using timer in equipment of intensive Labor. In case of system, it is difficult to grasp condition of the greenhouse about errors when this system has defect of a hardware, and it operates in the remote place or at night. In this paper, we developed a system that capable of replacing the existing control method of on/off with display panel in the greenhouse, monitoring data aquisition and status in the greenhouse using client computer based on internet. Also this system can communicate with each local greenhouse, and send alarm message about error. And we constructed web server to manage efficient informations for environmental control and corps cultivation in the greenhouse.

• International Journal of Contents
• /
• v.11 no.2
• /
• pp.37-49
• /
• 2015

Sensors, equipment, ICT facilities and their corresponding software have a relatively short lifetime relative to that of constructional structure, so these devices have to be continuously fixed or exchanged during maintenance and management. Furthermore, software or analysis tools should be periodically upgraded according to advances in ICT and analysis technology. Conventional monitoring systems have serious problems in that it is difficult for site engineers to modify or upgrade hardware and analysis algorithms. Moreover, we depend on the original system developer when we want to modify or upgrade inner program structures. In this paper, we propose a novel design for integrated maintenance and management of a monitoring system by applying the mobile cloud concept. The system is intended for use in disaster prevention of constructional structures, including bridges, tunnels, and in traditional buildings in a local heritage village, we analyze the status of these structures over a long term or a short-term period as well as in disaster situations. Data are collected over a mobile cloud and future expectations are analyzed according to probabilistic and statistical techniques. We implement our integrated monitoring system to solve the existing problems mentioned above. The final goal of this study is to design and implement a monitoring system for more than 10,000 structures spread within Korea. Furthermore, we can specifically apply the monitoring system presented here to a bridge made from timber in Asan Oeam Village and a traditional house in Andong Hahoe Village to monitor for possible disasters. The entire system design and implementation can be developed on the LinkSaaS platform and the monitoring services can also be implemented on the platform. We prove that the proposed system has good performance by performing a TTA authentication test, web accommodation test, and operation test using emulated data.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.19 no.1
• /
• pp.209-216
• /
• 2024

Land shrimp farms can control the growth environment more stably than coastal ones, making them advantageous for high-quality, large-scale production. In order to maintain an optimal shrimp growth environment, various factors such as water circulation, maintaining appropriate water temperature, oxygen supply, and feed supply must be managed. In particular, failure to properly manage water quality can lead to the death of shrimp, making it difficult to have people stationed at the farm 24 hours a day to continuously manage them. In this paper, to solve this problem, we design an integrated monitoring system for land farms that can be operated with minimal manpower. The proposed design plan uses IoT technology to collect real-time images of land farms, pump status, water quality data, and energy usage and transmit them to the server. Through web interfaces and smartphone apps, administrators can check the status of the farm stored on the server anytime, anywhere in real time and take necessary measures. Therefore, it is possible to significantly reduce field work hours without the need for managers to reside in the farm.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.05a
• /
• pp.823-826
• /
• 2008

This paper will show how to design home network management system in the wired/wireless environment using graphical language LabVIEW, J2ME and to apply the design to monitoring and remote controling for the information devices at home. This paper also provides with efficiency of device control and current status check according to the circumstances of administrators by constructing the wire/wirelessly integrated administration system. It means the administrators can access to central administration server and acquire the control right through web being able to operate the system with flexibility and can access to the server without computer whenever, wherever they need to control and administrate it through this wired/wireless unit easily.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.12
• /
• pp.7424-7429
• /
• 2014

GPS (Global Positioning System) is currently used widely in the ground section, such as surveying, mapping, geodesy, geophysics, the aviation section, such as aerial navigation and aerial photography, the sea section, including ship navigation and bathymetry, and space section, such as the satellite orbit and Earth's orbit. On the other hand, its use is limited due to the professional knowledge and expense to process the data for precise analysis. As a result, a web-based data processing solution for precise point positioning using GPS data was developed by c# for non-specialized people to process easily. In addition, the crustal movement speed of Korea after an earthquake was calculated to be an average of 30mm/year for each CORS, suggesting that it is possible to monitor crustal movement.

• Korean Journal of Soil Science and Fertilizer
• /
• v.43 no.5
• /
• pp.684-695
• /
• 2010

Geographic information system (GIS) is being increasingly used for decision making, planning and agricultural environment management because of its analytical capacity. GIS and remote sensing have been combined with environmental models for many agricultural applications on monitoring of soils, agricultural water quality, microbial activity, vegetation and aquatic insect distribution. This paper introduce principles, vegetation indices, spatial data structure, spatial analysis of GIS and remote sensing in agricultural applications including terrain analysis, soil erosion, and runoff potential. National Academy of Agricultural Science (NAAS), Rural Development Administration (RDA) has a spatial database of agricultural soils, surface and underground water, weeds, aquatic insect, and climate data, and established a web-GIS system providing spatial and temporal variability of agricultural environment information since 2007. GIS-based interactive mapping system would encourage researchers and students to widely utilize spatial information on their studies with regard to agricultural and environmental problem solving combined with other national GIS database. GIS and remote sensing will play an important role to support and make decisions from a national level of conservation and protection to a farm level of management practice in the near future.