• Journal of the Korean association of regional geographers
• /
• v.10 no.1
• /
• pp.206-214
• /
• 2004

The purpose of this paper is to elucidate the formation process of the Second Mujechi Moor at Mt. Jeongjok. For doing so, 1 analysed the formation process of valley which moor is located in, and the formation process of block field damming the valley: First, it is not a valley but a hollow which the Second Mujechi Moor located in. Hollow was formed as weathering bedrock weathered deeply along joints under warm and wet climatic conditions was denudated by rain wash. Second, the Second Mujechi Moor had been a marginal lake. Block stream developed during the last glacial period of Pleistocene, and it dammed the mouth of hollow. Afterwards sediments transported from slope filled the marginal lake, thus the lake changed to the moor where aquatic plants could grown. Third, the Second Mujechi Moor is drained and dried out by removal of matrix material from the block stream dam of the mouth of moor. For keeping moor's present conditions, we must control moor's drainage by filling open space in block stream with fine material.

• Journal of the Korean Ceramic Society
• /
• v.56 no.4
• /
• pp.365-373
• /
• 2019

Pond ash is a mixture of mostly coarser fly ash and bottom ash. The recycling rate of pond ash is low because pond ash is mixed with seawater and deposited in ponds. The pond ash is also subjected to natural weathering over a period of time. In this study, we investigated whether pond ash can be used as a raw material of geopolymers, without any purification process or through a minimal purification process. In addition, we investigated whether synthetic basalt made by adding foaming agent to geopolymer or casting it into a mold can show the surface of the natural basalt as it is. The highest 7-day compressive strength in geopolymers from pond ash without purification process was 26 MPa. The highest 7-day compressive strength in geopolymers from pond ash with impurities removed through dry sieve analysis was found to improve to 80 MPa. On the other hand, synthetic basalt made with geopolymer was shown to be more advantageous aesthetically when produced by casting it in a silicone mold rather than by adding a foaming agent. Non-purified pond ash can be made into geopolymers having low strength. Pond ash purified by sieving can, without use of an aggregate, be made into geopolymer having high-strength. Also, it is possible to produce synthetic basalt with the same appearance as natural basalt and sufficient strength for commercialization. This process will contribute to the mass consumption and recycling of pond ash.

• The Journal of the Petrological Society of Korea
• /
• v.24 no.3
• /
• pp.181-191
• /
• 2015

The Bakseok of Geunjeongjeon Hall in Gyeongbokgung Palace is platy floor stone acting as drainage, protected glaring and sliding. The Bakseoks were composed of anisotropic medium-grained biotite granite with a weak myrmekitic texture. Interpretation of transportation process for the Bakseok and original granite provenance trace of and analyze of identity based on ancient writings and detail field survey. As a result, the very similar granite with the Bakseok in lithology, composition mineral, texture and geochemical characteristics was found around Mt. Nakgasan in the Seokmodo Island. There were interpreted stonework process of the Bakseok used exfoliation granite dome with physical weathering properties in Seokmodo Island, to get platy stone economically stonework at the state level as a minimized on burden of supply and men power.

• Economic and Environmental Geology
• /
• v.46 no.3
• /
• pp.221-234
• /
• 2013

Laboratory experiments for the reaction with supercritical $CO_2$ under the $CO_2$ sequestration condition were performed to investigate the mineralogical and geochemical weathering process of the sandstones and mudstones in the Pohang basin. To simulate the supercritical $CO_2$-rock-groundwater reaction, rock samples used in the experiment were pulverized and the high pressurized cell (200 ml of capacity) was filled with 100 ml of groundwater and 30 g of powdered rock samples. The void space of the high pressurized cell was saturated with the supercritical $CO_2$ and maintained at 100 bar and $50^{\circ}C$ for 60 days. The changes of mineralogical and geochemical properties of rocks were measured by using XRD (X-Ray Diffractometer) and BET (Brunauer-Emmett-Teller). Concentrations of dissolved cations in groundwater were also measured for 60 days of the supercritical $CO_2$-rock-groundwater reaction. Results of XRD analyses indicated that the proportion of plagioclase and K-feldspar in the sandstone decreased and the proportion of illite, pyrite and smectite increased during the reaction. In the case of mudstone, the proportion of illite and kaolinite and cabonate-fluorapatite increased during the reaction. Concentration of $Ca^{2+}$ and $Na^+$ dissolved in groundwater increased during the reaction, suggesting that calcite and feldspars of the sandstone and mudstone would be significantly dissolved when it contacts with supercritical $CO_2$ and groundwater at $CO_2$ sequestration sites in Pohang basin. The average specific surface area of sandstone and mudstone using BET analysis increased from $27.3m^2/g$ and $19.6m^2/g$ to $28.6m^2/g$ and $26.6m^2/g$, respectively, and the average size of micro scale void spaces for the sandstone and mudstone decreased over 60 days reaction, resulting in the increase of micro pore spaces of rocks by the dissolution. Results suggested that the injection of supercritical $CO_2$ in Pohang basin would affect the physical property change of rocks and also $CO_2$ storage capacity in Pohang basin.

• Economic and Environmental Geology
• /
• v.31 no.6
• /
• pp.509-518
• /
• 1998

Fly ashes have been deposited around Youngwol power plant until electrostatic precipitator was installed in 1981. Fresh fly ash samples from electrostatic precipitator and weathered fly ash from ash disposal site were collected from Youngwol power plant, along with 65 soil samples of nearby area to look into the influence of PFA deposit on the soils in surrounding area. In chemistry, EPA does not contain high level of toxic elements and there is no notable concentration of toxic elements in soil near power plant. Total concentrations of Co, Cr, Cu, V, and Zn are 13 ppm, 89 ppm, 73 ppm, 157 ppm and 57 ppm in PFA. Concentrations of theses elements in ash-rich soils are 15 ppm, 78 ppm, 60 ppm, 133 ppm and 68 ppm, and those in ash-poor soils are 19 ppm, 70 ppm, 38 ppm, 91 ppm and 97 ppm. But these metal elements are highly concentrated in magnetic fractions of EPA (Co, 129 ppm; Cr, 217 ppm; Cu, 210 ppm; V, 197 ppm; Zn 90 ppm). Considering the process of long-term weathering of PFA, potentially toxic substances from the ash could be leached into soils and groundwater.

• 한국문화재보존과학회:학술대회논문집
• /
• 2005.03a
• /
• pp.71-88
• /
• 2005

With biological organism brown pollutants layers are thickly formed on inner stone materials in Gyeongjuseokbinggo(Ice storage in Gyeongju). Some simples were taken from this layer and its chemical composition, mineral composition, salt and microstructures were analyzed. This study shows that the pollutants layer can be removed easily, because it attached softly in stone surface. But because of its serious weathering state the stone surface also can be removed during the removing process. The origins of brown layer are assumed to be the soil in the mound over the Seokbinggo and the coarse sandy soil in the entrance. For the preservation of the Seokbinggo Waterproof and replacement of the coarse sandy soil should take precedence over the remove works. Subsequently moistureproof works should be enforced.

• Tunnel and Underground Space
• /
• v.5 no.4
• /
• pp.336-346
• /
• 1995

Geotechnical Information System (GTIS) for efficient management of three dimensional borehole data has been developed. Some problems were raised during the input process of borehole data, and alternative solutions were sought. According to the previous geotechnical reports, there is no unified weathering classification scheme. A criterion, 100 times/30cm from SPT, was turned out inappropriate to the discrimination of weathered rock from weathered soil. It has also been suggested that weathered soil, weathered rock, soft rock, and hard rock should be defined as CW, HW, MW, and SW~fresh condition. For better comparison of RQD, the use of NX size coring is recommended for the whole area although BX size coring has been used in excavated area. The limit of drilling depth up to 1 m from the top of surface of hard rock should be extended to avoid possible wrong interpretation of rock head due to the existence of corestone. The input data were analysed by geostatistical methods. It is found that the range in semivariogram is about 300m, and the variance of gneiss is greater than that of granite. It is because the granite data analysed came from almost single uniform rock mass(i.e.Seoul granite), but gneiss data came from the rock mass(i.e. Gyeonggi gneiss complex experienced several metamorphic metamorphic processes.

• Journal of Information Technology Services
• /
• v.13 no.2
• /
• pp.251-259
• /
• 2014

Outdoor cultural properties have been damaged by natural weathering and air pollution for a long time. For this reason, there are many characteristics it is hard to decipher some carved inscription on the surface of damaged outdoor cultural properties. Until now, Rubbed copy has been widely used to decode engraved inscription. A investigation for epigraph has been made by the rubbing that has resulted in a lower resolution from the viewpoints of extraction process and used materials. Rubbing's results are not satisfied in the damaged inscriptions which are weathered by natural environment and pollution for a long time and in the narrowed one. The main analysis presented in this paper is a cross section analysis method using 3d scanning technique for epigraph not read. Cross section analysis is a study on readability improvement method for ancient inscription of irregularity monument surface. Cross section analysis confirms information that separated the inscription information of monument and the ground information to read a ancient inscription and decode the inscription information. The proposed character identification method contributed to decoding an ancient inscription on Silla Monument in Jungseong-ri of Pohang.

• Proceedings of the KSR Conference
• /
• 2005.05a
• /
• pp.667-672
• /
• 2005

The uncemented breccia consisted of conglomerate and breccia, which are not originated from volcanic clastics, shows wide variation of engineering properties depending on the characteristics of matrix of the uncemented breccia. These uncemented breccia have breccia and matrix irregularly distributed according to their depth and position. Clay minerals are also included in the matrix of these uncemented breccia, so they are expected to show expansive behavior and weakness against weathering process. In this study, the volumetric ratio of breccia on the cores had been calculated using digital image processing technique (performed on recovered core box and their sections). The 3-axial compressional strength test had been done with a shaping of rapid cooling method, and the shear strength (c, ${\phi}$) of uncemented breccia due to the breccia content had been calculated by applying BIMROCK model curve suggested by Goodman. A reliable analysis on the engineering properties of uncemented breccia had been also possible by using borehole density logging and borehole loading test for the accurate determination of the unit weight and the deformation constants deformation modulus.

• Journal of Environmental Science International
• /
• v.19 no.4
• /
• pp.389-397
• /
• 2010

The in vitro toxicities of three crude oils of the Hebei Spirit were examined on laboratory grown plankton, with a focus on the effects of a dispersant. The specific growth rate of phytoplankton and the mortalities of two zooplankton were measured in response to exposure to various concentrations of water accommodated oil, dispersant or both. The effects of the oils varied among the plankton, but were generally low within the range of the oil concentrations used, with little difference in toxicity among the three oils. Such low toxicity appeared to be associated with weathering of the crude oils. Exposure to the dispersant, however, dramatically increased the mortality of zooplankton, with complete inhibition of phytoplankton growth. No synergistic toxic effect was observed with the crude oil and dispersant combination. A better decision making process could be crafted for future application of dispersant in the event of an oil spill in Korean waters to better protect the marine plankton community from the excessive use of dispersant.