• Journal of information and communication convergence engineering
• /
• v.7 no.4
• /
• pp.565-569
• /
• 2009

This paper proposed the safety helmet monitoring system based on USN(Ubiquitous Sensor Networks) to secure the wear of helmet for labor on the construction area. As one of the most significant gear to assure labor's safety, The safety helmet would have the extend of labor's injuries minimized whether one wears or not when an accident takes place. At this point, we have developed and demonstrated the system which is able to check who wear the safety helmet properly for labors, composed of safety helmets with sensor node, router nodes, sink node and management program. Moreover, we could show optimized parameters for the proposed USN system as doing experiment and demonstration, we expected that this system would make for labor wear the safety helmet properly on the construction area as well as prevent economic injury caused by an accident with not wearing for labors.

• Journal of the Ergonomics Society of Korea
• /
• v.17 no.1
• /
• pp.115-123
• /
• 1998

We study the ski wear which are compared at the materials and the designes and their human physiological and phychological response during exercise in a cold and air-conditioned enviroments. Five men exercises in the experiment room with four types of ski-wears : two of one-piece and two of two-piece : two of special material and two of a normal material, respectively. We keep the environment at $-5^{\circ}C$ and speed of 3.6 mile/hr during the measurement of 13 points, which is a mean model of the Muju ski-resort at January 1996. We conclude the followings : 1. The ski-wear with special materials have higher than the normal type at mean skin temperature and rectal temperature. 2. Changes of temperature withing the clothes during the exercise is small, but the humidity within the clothes abruptly increases because of the weight loss. 3. Type A ski-wear with the special material has $295.5g/m^2hr$ weight loss, which is higher, and type D ski-wear is smaller 4. The special material shows comfortable in the thermal sensation. 5. In the design aspect of the ski-wears, the two-piece type ski-wear shows higher skin temperature and temperature & humidity within the clothes than the one-piece type due to the effect of the multiplicity.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.22 no.7
• /
• pp.963-968
• /
• 1998

A study was conducted to investigate the effect of cooling hands of feet on human thermoregulation in the cold. Eight young (22$\pm$1 yr) and eight aged (69$\pm$4 yr) men volun-teered as subjects They stayed at 1$0^{\circ}C$ in the supine posture during the experiment which included hands or feet exposure to the air for 20 minutes. Hand Exposure (HE) and Foot Exposure (FE) were conducted in radomized order and the baseline was kept before HE and FE. Core temperatures, limb skin temperatures adn thermal sensations were measured. Obtained data were analyze using t-test and correlation. Rectal and esophageal tem-peratures increased in the young (YG) and in aged (AG). Change rate of esophageal temperature (Tes) was maintained higher during FE than HE while rectal temperature showed no differences between YG and AG, and between HE and FE. Hand and foot skintemperature in YG and AG decreased similarly during HE and Fe. Forearm skin temperature during HE decreased while leg skin temperature during FE showed no change HE and Fe. It was concluded that the lower cooling. Furthermore, the increase of Tes was greater in young men than aged men. It is also suggested that the wearing behavior can be differently modified between young and aged men.

• Journal of the Korean Home Economics Association
• /
• v.37 no.12 s.142
• /
• pp.193-203
• /
• 1999

This study was executed to show influence of material and property of sportswear to physiological responses of body and comfort sensation and to supply basic research data about comfortable sportswear Trainning wear was manufactured with cotton(C) and hygroscopically treated polyester material (FP), and its properties of material were measured. Then rectal temperature, skin temperature, heart rate, weight loss, clothing microclimate and subjective sensation was estimated with study of wearing with these sportswear and examined the influence that it got to physiological responses of body and sensation. Health adult men were selected for subjects and executed at climatic chamber of temperature, $20\pm2^{\circ}C and humidity, $60\pm5%$ R.H. Conclusively sportswear of hygroscopically treated polyester is a favorable functional material. So far factor that affect to physiological comfort sensation has been explained mostly by moisture regain but in our experiment, it turned out that air permeability, water absorption velocity and dynamic oater absorption etc. were affecting factors. So according to this result, air permeability and moisture permeability should be considered with transmittance of temperature moisture for development of comfort material.

• Journal of Drive and Control
• /
• v.12 no.4
• /
• pp.28-34
• /
• 2015

Because heavy-duty construction vehicles such as excavators are required for good engine-room cooling capacity, a hydraulic gear motor is adopted in the cooling fan drive mechanism to actively control the output speed, instead of adopting the conventional ON/OFF type belt drive. While gear motors are normally limited to 140bars of operating pressure, those for the cooling fan are capable of operating at continuous pressures of up to 220bars. After assembly, all gear motors for high pressure must pass an aging test which is a kind of the wearing process between the gear teeth and motor housing. During the aging process with gradual pressure increments, gear sticking sometimes occurs due to abnormal wear, resulting in defects. This paper focuses on a gear-sticking free aging test controller that is designed together with the knowledge of an experienced operator and the analysis results of experimental data of the gear jamming phenomenon. From the aging experiment, it is demonstrated that the developed controller that can alter the setting pressure of the load pump is effective for stabilizing the abrupt increase in the motor input pressure, thus preventing the hydraulic motor from stopping. This is expected to be helpful for the reduction of defects and increase in productivity.

• The Research Journal of the Costume Culture
• /
• v.13 no.1
• /
• pp.75-86
• /
• 2005

The objectives of this study were to investigate differences between image perceptions according to gender, place of residence, and fashion trend; and to examine how the image of preferred clothing was evaluated in each given area of fashion trend. Subjects were 386 schoolchildren (boys:196, girls:190) in Seoul, Daejeon, and Jinju, Korea. Based on a quasi-experiment study, a survey was conducted with a questionnaire providing different clothing images of fashion trend. Stimuli were 5 colored photo pictures of a girl wearing clothing according to fashion trend. The clothing used in the study met requirements of 2004 S/S trend of children's clothing. The high valued clothing sold in three target places were used. There was a significant difference in image perceptions between two sexes. Girls showed more positive attitude in image perceptions toward fashionable clothing in most areas than boys. Children from smaller towns evaluated the model clothing more fashionable. Schoolchildren preferred sporty clothing to the other fashionable clothing. In view of trend, romantic clothing normally viewed less dynamic were evaluated preferable clothing when children viewed the clothing active. Sports-wears were considered fashionable when they viewed the clothing neat and vigorous.

• Journal of Sensor Science and Technology
• /
• v.26 no.5
• /
• pp.353-359
• /
• 2017

This paper describes the design and manufacture of a ankle two-axis force sensor of a walking assist robot for hemiplegic leg patient. The walking assist robot for the hemiplegic leg patient can safely control the robot by detecting whether the foot wearing the walking assist robot is in contact with the obstacle or not. To do so, a two-axis force sensor should be attached to the robot's ankle. The sensor is used to measure the force of a patient's ankle lower part. The two-axis force sensor is composed of a Fx force sensor, a Fy force sensor and a pulley, and they detect the x and y direction forces, respectively. The two-axis force sensor was designed using by FEM(Finite Element Method), and manufactured using by strain-gages. The characteristics experiment of the two-axis force sensor was carried out respectively. The test results indicated that the interference error of the two-axis force sensor was less than 1.2%, the repeatability error and the non-linearity of the two-axis force sensor was less than 0.04% respectively. Therefore, the fabricated two-axis force sensor can be used to measure the force of ankle lower part in the walking assist robot.

• Korean Journal of Human Ecology
• /
• v.12 no.2
• /
• pp.253-263
• /
• 2003

The purposes of this study were to find out an evaluation scale that could predict wear comfort and to investigate the effect of the skin-contacting fiber type on the subjective sensation and microclimate. Sensorial evaluation was basically followed by the Human Perception Analysis (HPA) interviewing 144 consumers. Sixteen female subjects were participated in the sleeve wear test with and without wearing vapor permeable water repellent outerwear. Experimental sleeves were constructed using the same double knit by turning inside out to control other material effects except the skin-contacting fiber type, hence each different side of double knit, cotton side and the cotton/polypropylene blend side, was next to skin in each trial of the experiment. As results, it was noted that the term representing a combined feeling of thermal and wetness sensation, and muggy appeared to be a powerful language to measure perceptual responses of human subject among five dimensions of evaluation. although the ordinary users did not use the term very often. As for the comfort properties of double knits, it seemed that subjects slightly more preferred polypropylene/cotton blend to cotton as the skin-contacting fiber type when they wore outerwear and their skin were covered with sweat, although the result was rot statistically significant and need to be confirmed under higher work load.

• Journal of Biomedical Engineering Research
• /
• v.35 no.2
• /
• pp.14-18
• /
• 2014

This study is about e-Book program based on human-computer interaction(HCI) system for physically handicapped person. By acquiring background knowledge of HCI, we know that if we use vision-based interface we can replace current computer input devices by extracting any characteristic point and tracing it. We decided betweeneyes as a characteristic point by analyzing facial input image using webcam. But because of three-dimensional structure of glasses, the person who is wearing glasses wasn't suitable for tracing between-eyes. So we changed characteristic point to the bridge of the nose after detecting between-eyes. By using this technique, we could trace rotation of head in real-time regardless of glasses. To test this program's usefulness, we conducted an experiment to analyze the test result on actual application. Consequently, we got 96.5% rate of success for controlling e-Book under proper condition by analyzing the test result of 20 subjects.

• Fashion & Textile Research Journal
• /
• v.11 no.1
• /
• pp.121-129
• /
• 2009

Nowadays, global interest is being placed on research and development of smart clothing which is expected to create a high added-value industry in the future. The purpose of this research is to develop smart pants with vibrating massage functions that have excellent outer appearances and provide comfort to wearers and assess outer appearance, comfort, and massaging effects of smart pants. As the results of this research, smart pants where vibrating devices which are mainly composed of vibrating motor, controller, and switch are attached were completed. Vibrating motors were fixed on a thin and light non-woven fabric material, covered with a mesh material, and attached by snaps to the experiment pants. Switch was attached to the inside of a pocket, and batteries were positioned inside of pockets. Ten subjects marked their satisfaction of wearing smart pants on a 5-point scale. Noticeable changes in outer appearance when vibrating motors operate turned out to be low. Wearer's comfort in back waist and front thigh parts where vibrating motors were attached turned out to be high-satisfied. Massaging effects of smart pants turned out to be high. Attaching and detaching vibrating devices turned out to be convenient. Lining materials used for smart paints were effective in blocking electromagnetic waves generated from vibrating devices.