• Journal of Powder Materials
• /
• v.28 no.5
• /
• pp.381-388
• /
• 2021

Zirconia has excellent mechanical properties, such as high fracture toughness, wear resistance, and flexural strength, which make it a candidate for application in bead mills as milling media as well as a variety of components. In addition, enhanced mechanical properties can be attained by adding oxide or non-oxide dispersing particles to zirconia ceramics. In this study, the densification and mechanical properties of YSZ-TiC ceramic composites with different TiC contents and sintering temperatures are investigated. YSZ - x vol.% TiC (x=10, 20, 30) system is selected as compositions of interest. The mixed powders are sintered using hot pressing (HP) at different temperatures of 1300, 1400, and 1500℃. The densification behavior and mechanical properties of sintered ceramics, such as hardness and fracture toughness, are examined.

• Tribology and Lubricants
• /
• v.37 no.2
• /
• pp.62-70
• /
• 2021

The problem with intermetallics coating using the heat of molten casting is that the heat generated during combustion synthesis dissolves the coating and the substrate metal. This study investigates whether pre-annealing before synthesis can control the reaction heat, with the aim of Ni₃Al coating on the casting surface. Therefore, the effects of the annealing temperature and time on the combustion synthesis behavior of the powder compact of Ni-25at%Al after annealing were investigated. As results, the reaction heat when synthesized decreased as the annealing temperature was high and the annealing time was longer. This was attributed to the fact that Al was diffused to Ni particles during low temperature annealing and intermediate Ni-Al compounds were formed during high temperature annealing. After combustion synthesis, however, it was found that their microstructures were almost identical except for the amount of intermediate intermetallics. Furthermore, an annealing temperature above 450℃, at which intermediate compounds begin to form, is needed to prevent the dissolving problem during synthesizing. The intermetallics synthesized after annealing at higher temperature and prolonger annealing time showed a good wear resistance. This might be because much intermediate intermetallics of high hardness were remained in the microstructure.

• Journal of Fashion Business
• /
• v.27 no.6
• /
• pp.110-123
• /
• 2023

As social distancing strengthened after the COVID-19 incident, people looked for things they could do alone. Additionally, as people have more financial resources, they purchase products they had previously considered purchasing, and the phenomenon of giving gifts to oneself has also appeared. Accordingly, this study analyzed fashion product reviews of KakaoTalk Gift, the service to exchange gift via SNS mobile app, to discover the phenomenon of self-gifting and the differences from interpersonal-gifting. For post-hoc data, in collected 18,354 pieces after excluding unnecessary data using a Python-based web crawling technique. The self-gifting behavior of KakaoTalk Gift different from the previous study for self-gift. Regardless of the gift-giving contexts, it determines that most self-gift products are material items. There are differences in product types and price levels when choosing gifts for others and oneself. As a self-gift, people typically buy luxury jewelry and branded bags/wallets to wear and show off. As interpersonal, among fashion products, people usually buy beauty products that reflect less personal tastes. When gift-giving to others, people buy products to appropriate prices to reduce the burden on both. When gift-giving to oneself, people buy wanted products regardless of the price. This study is significant because it suggests a new direction in self-gift research by limited online places to give gifts.

• Research in Community and Public Health Nursing
• /
• v.9 no.2
• /
• pp.502-517
• /
• 1998

This research intends to survey family environment, health behavior and health status of the students in urban-rural elementary schools and analyze those factors comparatively, and use the result as basic material for school health teacher to teach health education in connection with family and regional areas. It also intends to improve a pupil's self-abilitiy in health care. The subjects involve 2,774 students of urban elementary schools and 583 student in rural ones, who were selected by means of a multi -stage probability sampling. Using the questionnaire and school documents, we collected data on family environment, health behavior and health status for 19 days. Feb. 2nd 1998 through Feb. 20th 1998. The R -form of Family Environment Scale (Moos, 1974) was used in the analysis of family environment(Cronbach's Alpha =0.80). Questionnaires of Health Behavior in School-aged children used by the WHO in Europe(Aaro et al., 1986) and the ones developed by the Health Promotion Committee of the Western Pacific(WHO, 1995)(adapted by long Young-suk and Moon Young-hee(1996)) were used in the analysis of health behavior, as well documents on absences due to sickness, school health room-visits, levels of physical strength, height, weight and degree of obesity were used to determine health status. In next step, We used them with an $X^2$-test, t-test, Odds Ratio, and a 95% Confidence Interval. 1. In two dimensions of three, family-relationship (t=3.41, p=0.001) and system -maintenances(t= 2.41, p=0.0l6) the mean score of urban children were significantly higher than those of rural ones. In the personal development dimension however, there was little significant difference. Assorting family environment into 10 sub-fields and analyzing them, we recognized that urban children were superior to rural children in the sub-fields of expressiveness (t =3.47, p=0.001), conflict (t=0.48, p=0.001), active-recreational orientation (t = 1.97, p=0.049) and organization (t=4.33, p=0.000). 2. Referring to the Odds Ratios of urban-rural children's health behaviors, urban children set up more desirable behavior than rural children wear ing safety belts (Odds Ratio =0.32, p=0.000), washing hands after meals(Odds Ratio = 0.43, p= 0.000), washing hands after excreting (Odds Ratio = 0.39, p=O.OOO), washing hands after coming - home ( Odds Ratio = 0.75, p = 0.003), brushing teeth before sleeping(Odds Ratio =0.45, p=0.000), brushing teeth more than once a day (Odds Ratio =0.73, p=0.0l2), drinking boiled water (Odds Ratio = 0.49, p=0.000), collecting garbage at home(Odds Ratio=0.31, p=0.000) and in the school(Odds Ratio =0. 67, p=0.000). All these led to significant differences. As to taking milk(Odds Ratio = 1.50, p=0.000), taking care of eyesight(Odds Ratio=1.41, p=0.001) and getting physical exercise in(Odds Ratio = 1.33, p=0.0l9) and outside the school(Odds Ratio = 1.32, p=0.005), rural children had more desirable behavior which also revealed a significant difference. There was little significant difference in smoking, but the smoking rate of rural children(5.5%) was larger than that of urban children(3.9%). 3. Health status was analyzed in terms of absences, school health room-visits, levels of physical strength, and the degree of obesity, height and weight. Considering Odds Ratios of the health status of urban-rural children, the health status of rural children was significantly better than that of the urban ones in the level of physical strength(t=1.51, p=0.000) and the degree of obesity(t=1.84, p=0.000). The mean height of urban children ($150.4{\pm}7.5cm$) is taller than that of their counterparts($149.5{\pm}7.9$), which revealed a significant difference (t =2.47, p=0.0l4). The mean weight of urban children($42.9{\pm}8.6kg$) is larger than that of their counterparts($41.8{\pm}9.0kg$), which was also a significant difference(t=2.81, p=0.005). Considering the results above, we can recognize that there are significant differences in family environment, health behavior, and health status in urban-rural children. These results also suggestion ideas for health education. What we would suggest for the health program of elementary schools is that school health teachers should play an active role in promoting the need and importance of health education, develop the appropriate programs which correspond to the regional characteristics, and incorporate them into schools to improve children's ability to manage their own health management.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.7
• /
• pp.175-181
• /
• 2016

This occurs when the unbalanced rotating body is inconsistent with the mass center line axis geometric center line. Wheelsets are assembled by a single axle with two wheels and a rotating body of a running railway vehicle. Owing to non-uniformity of the wheel material, the wear, and error of the wheel and axle assembly may cause an imbalance. Wheelsets will suffer the effects of vibrations due to the unbalanced mass, which becomes more pronounced due to the thin and high-speed rotation compared to the shaft diameter This can affect the driving safety and the running behavior of a rail car during high-speed running. Therefore, this study examined this unbalanced wheel using a railway vehicle multibody dynamics analysis tool to assess the impact of the dynamic VI-Rail movement of high-speed railway vehicles. Increasing the extent of wheel imbalance on the analysis confirmed that the critical speed of a railway vehicle bogie is reduced and the high-speed traveling dropped below the vehicle dynamic behaviour. Therefore, the adverse effects of the amount of a wheel imbalance on travel highlight the need for management of wheel imbalances. In addition, the static and dynamic management needs of a wheel imbalance need to be presented to the national rail vehicles operating agency.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.6
• /
• pp.432-439
• /
• 2018

The purpose of this study was to analyze the knowledge, attitudes, safety management behavior, and radiation anxiety of dental hygienists and to analyze affecting factors in order to improve the level of radiation safety management and reduce anxiety. The study period consisted of 280 dental hygienists working in Jeollabuk-do from September 10 to October 31, 2017 using the SPSS 12.0 program, frequency, descriptive statistics, and multiple regression analysis. The average knowledge level of radiation quality control was 8.07, and the correct answer rate was 75.3%. The attitude level was 96.1%, and the radiation safety management behavior was 4.11 for the photographer and 4.58 for the 'always wear a TLD (personal dosimeter) during radiography'. Patient radiation safety management behavior was 3.86, and the highest was '4.69' to confirm pregnancy of the woman before radiography. Radiation-covered lining was 3.86, and was the highest at 4.13 for 'I am concerned about fetal health when I am pregnant'. Factors affecting radiation exposure anxiety were lower radiation safety management behaviors, lower age, lower radiographic experience, higher educational background, higher monthly income, and higher job title (p<0.05). Based on the above results, dental hygienists had strong knowledge, attitudes, and safety management practices for radiation quality control. However, since anxiety related to radiation exposure was high, it is possible to improve radiation safety management level and reduce radiation exposure anxiety.

• KIPS Transactions on Computer and Communication Systems
• /
• v.9 no.8
• /
• pp.171-180
• /
• 2020

Smart Factory consists of digital automation solutions throughout the production process, including design, development, manufacturing and distribution, and it is an intelligent factory that installs IoT in its internal facilities and machines to collect process data in real time and analyze them so that it can control itself. The smart factory's equipment works in a physical combination of numerous hardware, rather than a virtual character being driven by a single object, such as a game. In other words, for a specific common goal, multiple devices must perform individual actions simultaneously. By taking advantage of the smart factory, which can collect process data in real time, if reinforcement learning is used instead of general machine learning, behavior control can be performed without the required training data. However, in the real world, it is impossible to learn more than tens of millions of iterations due to physical wear and time. Thus, this paper uses simulators to develop grid sortation systems focusing on transport facilities, one of the complex environments in smart factory field, and design cooperative multi-agent-based reinforcement learning to demonstrate efficient behavior control.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.34 no.1
• /
• pp.99-105
• /
• 2007

In clinical practice, air bubbles trapped in the pit and fissure may increase early loss of sealing materials for fracture, wear and microleakage. The purpose of this investigation was to examine the bubble behavior of pit and fissure sealant. The 140 replicas made of epoxy resin were used to this experiment. Following conditioning, light-polymerized sealants were applied and then exposed to the light source. After stereoscopic examination of standarized specimen by grinding, bubble behavior was analysed. The results obtained were as follows; 1. Ultraseal $XT^{(R)}$ plus grops irrespective of using time were higher than groups of $Helioseal^{(R)}$ with clinpro tip and metal tip in the frequency of bubble(p<0.05), 2. Ultraseal $XT^{(R)}$ plus old group was more than $Clinpro^{(R)}$, Teethmate $F-l^{(R)}$ and $Helioseal^{(R)}$ with brush tip in the number of bubble under 200 magnified cross section(p<0.05). 3. The widest mean area of bubble was shown in the Teethmate $F-1^{(R)}$. 4. No statistically significant difference of the frequency and the site of bubble between $Clinpro^{(R)}$ and $Helioseal^{(R)}$ groups(p>0.05).

• Journal of the Korean institute of surface engineering
• /
• v.46 no.2
• /
• pp.68-74
• /
• 2013

For the coating of diamond films on WC-Co tools, a buffer interlayer is needed because Co catalyzes diamond into graphite. W and Ti were chosen as candidate interlayer materials to prevent the diffusion of Co during diamond deposition. W or Ti interlayer of $1{\mu}m$ thickness was deposited on WC-Co substrate under Ar in a DC magnetron sputter. After seeding treatment of the interlayer-deposited specimens in an ultrasonic bath containing nanometer diamond powders, $2{\mu}m$ thick nanocrystalline diamond (NCD) films were deposited at $600^{\circ}C$ over the metal layers in a 2.45 GHz microwave plasma CVD system. The cross-sectional morphology of films was observed by FESEM. X-ray diffraction and visual Raman spectroscopy were used to confirm the NCD crystal structure. Micro hardness was measured by nano-indenter. The coefficient of friction (COF) was measured by tribology test using ball on disk method. After tribology test, wear tracks were examined by optical microscope and alpha step profiler. Rockwell C indentation test was performed to characterize the adhesion between films and substrate. Ti and W were found good interlayer materials to act as Co diffusion barriers and diamond nucleation layers. The COFs on NCD films with W or Ti interlayer were measured as less than 0.1 whereas that on bare WC-Co was 0.6~1.0. However, W interlayer exhibited better results than Ti in terms of the adhesion to WC-Co substrate and to NCD film. This result is believed to be due to smaller difference in the coefficients of thermal expansion of the related films in the case of W interlayer than Ti one. By varying the thickness of W interlayer as 1, 2, and $4{\mu}m$ with a fixed $2{\mu}m$ thick NCD film, no difference in COF and wear behavior but a significant change in adhesion was observed. It was shown that the thicker the interlayer, the stronger the adhesion. It is suggested that thicker W interlayer is more effective in relieving the residual stress of NCD film during cooling after deposition and results in stronger adhesion.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.41 no.2
• /
• pp.254-265
• /
• 2017

This study examines the possibility of a neuro-scientific approach to fashion Visual Merchandising (VM), by researching the brain activation of customers about fashion stores in terms of VM. Study subjects were in 20's-30's residing in Busan and ten ordinary person or fashion industry related individuals, it measures the change of cerebral blood flow on positive/negative photo stimulus in terms of VM using a functional Near Infrared Spectroscopy (fNIRS) device, and then compared the brain activation to the difference of the fashion store VM. Photo stimuli utilized in the experiment were selected through a preliminary study in advance. The results of this study are as follows. First, the brain activation was found in all 16 channels of stimulus ranges of fashion store VM regardless of positive/negative stimulus. This means that the VM of fashion store causes changes to the cerebral blood flow of consumers, which implies that consumer behavior can be affected by store VM. It also shows that the brain is more active in negative VM stimulus than positive VM despite slight differences in the subjects. In terms of VM, this suggests that the negative factors of fashion stores have a greater effect on the brains of consumers compared to the positive factors. Second, the reaction of the brain channel is different according to the positive/negative VM stimulus of the fashion store by product group and confirms that positive/negative VM stimulus can be distinguished by brain-reaction for the three product groups except for the underwear group among four product groups (men's wear store, women's wear store, underwear store, and sportswear store). The results indicate that more objective scientific measure and decision-making are possible through neuro-science in the strategic execution of VM. This study verified the possibility for a neuro-scientific approach to fashion VM; therefore, there are expectations for the various activation of interdisciplinary research and subsequent development of VM that utilize neuroscience in fashion marketing.