• 한국의류학회지
• /
• 제26권7호
• /
• pp.1055-1065
• /
• 2002

The specific objectives of the survey were as follows: 1) to survey the knit wear purchasing behavior of the women in their twentieth and thirtieth, 2) to investigate the popular design, color, pattern and material, 3) to analyze the difference of knit wear purchasing behavior and preference. The data was on the base of the results of 321 pcs survey reports. The analysis methods was Means, Percentage, Frequencies, t-test and One-way ANOVA. The results of this study were as follows: 1) Most women were purchasing knit wear for combination with having other clothes. They were satisfied for design, color, activity and quality, but not for size changing after washing, keeping problems and raising of pilling. They liked simple or classic design, mono or pastel color, and no or simple skip pattern, check pattern. 2) The Single women were more purchasing knit wear by impulse for soft and easy handling, combination with other clothes, meet fashion trend than married women. And the women in their twentieth were get more informations for knit wear from mess media and displayed shop than the women in their thirtieth.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2003년도 학술대회지
• /
• pp.313-323
• /
• 2003

The sliding wear behaviors of Zircaloy-4 nuclear fuel rod were investigated using two support springs with convex and concave shapes in room temperature air and water. The main focus is to compare the wear behavior of various test variables such as slip amplitude, environment, contact contours with different spring shape and a number of cycles. The results indicated that wear volume and maximum wear depth increased with slip amplitude in both air and water, but their trends tended to change according to the spring shapes and test environments. In air condition, the wear volume was controlled by wear debris behavior generated on worn surface. As a result, final wear volume and maximum wear depth decreased if a ratio of protruded wear volume to worn area $(D_p)$ would be saturated to specific value. This is because wear particle layer could accommodate large strain by accumulating and transforming wear particle layer. However, in water condition, metal-to metal contact was more dominant and wear volume was greatly affected by changed mechanical behavior between contact surfaces since wear debris should be generated after repeated plastic deformation and fracture. After wear test, worn surfaces were examined using optical microscope and SEM and details of wear mechanism were discussed using a ratio of wear volume to worn area $(D_e)$ at each test condition.

• 동력기계공학회지
• /
• 제9권2호
• /
• pp.57-64
• /
• 2005

This paper is the study on dry sliding wear behavior of carbon fiber reinforced epoxy matrix composites against lay-up orientation. Tests were investigated on the effect of the lay-up orientation, fiber sliding direction, load and sliding velocity when circumstance keep continuously at $21^{\circ}C$, 60%RH. Pin-on-disk dry sliding wear tests for each experimental condition were carried out with a carbon fiber reinforced plastic pin on stainless steel disk in order to search the friction and wear characteristics. The wear rates and friction coefficients against the stainless steel counterpart were experimentally determined and the wear mechanisms were microscopically observed. The effect on friction and wear behavior are observed differently, according to various conditions. When sliding took place against counterpart, the highest wear resistance and the lowest friction coefficient were observed in the $[0]_{24s}$ lay-up orientation at anti-parallel direction.

• 대한기계학회논문집A
• /
• 제24권2호
• /
• pp.464-471
• /
• 2000

The fracture and wear behavior of dental composite resins containing prepolymerized particle fillers were investigated. Composite resins such as Metafil, Silux Plus, Heliomolar and Palfique Estelite were selected as specimens and contents of filler in specimens in order to evaluate the effect of prepolymerized particle fillers in fracture and wear characteristics. Ball on flat wear tester was used for the wear test at room temperature. The friction coefficient of Metafil was quite high relatively, and the wear resistances of Silux Plus and Palfique Estelite were better than those of Metafil and Heliomolar at the same experimental condition. It was found that the main wear mechanism was abrasive wear containing of plastic deformation of dental material.

• Tribology and Lubricants
• /
• 제20권3호
• /
• pp.125-131
• /
• 2004

Nano-wear behavior of amorphous carbon films was studied by Atomic Force Microscopy. The a-C films are deposited on Si(100) substrate by DC magnetron sputtering method. The influences of different surface roughness on the nano-wear are investigated. Nano-wear tests were carried out using a very sharp diamond coated tip. Its spring constant was 1.6 N/m and radius of curvature was 110 nm. Normal force used in the wear tests ranged 0 to 400 nN. It was found that surface depression occurred during scratching because of plastic deformation and abrasive wear (cutting St ploughing). Wear depth increased linearly with normal force. Changing the surface roughness variables according to the bias pulse control, the less surface roughness decreased the wear depth. The thickness did not affect the wear resistance.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 1998년도 제28회 추계학술대회
• /
• pp.265-271
• /
• 1998

High temperature wear behavior of plasma sprayed zirconia based coating sealing with zirconia sol were investigated for high temperature wear resistance application. The zirconia powders containing 2.5, 5.0, 7.5, 10.0 mol% of MoS$_2$, $Fe_2O_3$ for plasma spray were made by spray drying method. As-sprayed coating was sealed by zirconia-sol to fill up the pore and crack in coating. wear test were performed at temperature ranges from room temperature to 600$\circ$C. The microstructural changes of before and after sealing process were examined by SEM, XRD and EPMA. After sealing process, the porosity was decreased and micro-hardness was increased. The wear properties of coating after sealing process were improved by sealing of pores and cracks. The behavior of wear amount and coefficient of friction were same tendency to before sealing process.

• 한국세라믹학회지
• /
• 제30권12호
• /
• pp.1059-1065
• /
• 1993

The sliding wear behavior of the plasma sprayed zirconia containing 8wt% yttria was investigated over a range of room temperature to 800℃. Both of the friction coefficient and the wear loss increased reaching its maximum at about to 499℃. and then decreased again with increasing temperature up to 800℃. The worn surface at elevated temperature were observed and analyzed by scanning electron microscopy and X-ray diffractometer to study the mechanisms of high temperature wear behavior. Surface morphology of the worn samples changes with temperature. Monoclinic (m)/tetragonal (t) x-ray peak intensity ratio of wear debris and worn surface decreased with increasing temperature. Non-transformable tetragonal (t') to metastable tetragonal (t) phase transformation of worn surface increased with increasing temperature. The results indicate that dehumidification and above phase changes are contributing to the high temperature wear behavior of the plasma sprayed ZrO2-Y2O3 coatings.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2006년도 춘계학술대회 논문집
• /
• pp.149-152
• /
• 2006

Dry sliding wear behavior of low carbon dual phase steel, of which microstructure consists of hard martensite in a ductile ferrite matrix, has been investigated. The wear characteristics of the dual phase steel was compared with that of a plain carbon steel which was normalized at $950^{\circ}C$ for 30min and then air-cooled. Dry sliding wear tests were carried out using a pin-on-disk type tester at various loads of 1N to 10N under a constant sliding speed condition of 0.2m/sec against an AISI 52100 bearing steel ball at room temperature. The sliding distance was fixed as 1000m for all wear tests. The wear rate was calculated by dividing the weight loss measured to the accuracy of $10^{-5}g$ by the specific gravity and sliding distance. The worn surfaces and wear debris were analyzed by SEM, EDS and a profilomter. Micro vickers hardness values of the cross section of worn surface were measured to analyze strain hardening behavior underneath the wearing surfaces. The were rate of the dual phase steel was lower than the plain carbon steel. Oxidation on the sliding surface and strain hardening were attributed for the higher wear resistance of the dual phase steel.

• 한국생활과학회지
• /
• 제18권2호
• /
• pp.431-439
• /
• 2009

This research aims to invest consumers' purchase behavior and preference of F/W season knit wear to prepare for basic data in producing competitive knit wear which can meet consumers' demands. The results are as follows: 1. Consumers in their twenties are largely purchasing their knit wear at bonded clothing shops, consumers in their thirties at outlet stores and consumers in their forties and fifties at department stores. As for preferred materials in knit wear, the twenties like 100% of cotton, the thirties mixed wool, and the forties and the fifties 100% of wool. Across all age groups, they prefer knit wear pattern with no figures, while they consider its design and color as important factors in purchasing F/W knit wear. 2. As for the wearing sensations of F/W knitwear of three age groups, there are not significant differences in other factors except a factor of 'jacket length'. 3. As for the fitting sensation about F/W knit wear, consumers with 'thin' somatotype feel high comfort in the factor of 'girth', while consumers with standard somatotype feel high satisfaction in the factor of 'length'.

• 한국생활과학회지
• /
• 제14권5호
• /
• pp.805-812
• /
• 2005

The purpose of this study is to analyze the shopping orientation and purchase behavior of missy women who are the main consumers of baby's wear and to identify the differences between decision criteria for baby's wear purchase and purchase behavior by their types of shopping orientation. The results of this study are as followings: 1. The analysis of shopping orientation shows that there are five factors; pleasure-oriented, practicality-oriented, impulse-oriented, store-devoted, and individual-oriented shopping. The group analysis shows that there are five groups; store-devoted shopping group, individual-oriented shopping group, impulse-oriented shopping group, practicality-oriented shopping group and pleasure-oriented shopping group. 2. The analysis of the differences in decision criteria for baby's wear purchase by the types of shopping orientation demonstrates that there are significance differences in all variables except price and design variables. The results show that store-devoted shopping group puts an emphasis on the quality and practicality. Individual-oriented shopping group emphasizes practicality. Impulse-oriented shopping group considers brand image and fashionableness. Practicality-oriented shopping group focuses on practicality. And pleasure-oriented shopping group regards brand image and fashionableness. 3. In order to find out the purchase behavior by the types of shopping orientation, several variables, such as favored images by the types, information resources, store selection behavior, purchase expanses, purchase frequency, and the ratio of purchasing imported baby's wear, are analyzed. The results show no significant differences among them.