• 한국어류학회지
• /
• 제29권4호
• /
• pp.252-257
• /
• 2017

잉어목 모래무지아과에 속하는 한국 고유종 돌마자 Microphysogobio yaluensis 난소 내 생식세포들의 형태학적 특징을 연구하기 광학현미경을 이용하여 조사하였다. 난자형성과정 (oogenesis)은 크게 염색인기 (chromatin-nucleolus stage), 주변인기(peri-nucleolus stage), 난황형성기(vitellogenesis)의 난황포 및 난황구기와 성숙(mature stage)의 단계로 구분되었다. 염색인기에는 배포가 크게 형성되며 실모양의 염색질이 산재되어 있다. 주변인기에는 핵 내에 산성의 인들이 핵막인근에 분포하고 있었으며, 난막(egg envelope)이 형성되기 시작하였다. 이후 난황형성기의 난황포 단계에서는 세포질의 대부분이 텅빈 공포모양의 난황포로 구성되며, 발생이 진행되면서 난황구 단계에서는 난황포 사이에 eosin에 염색되는 난황과립으로 대체되었다. 성숙단계에 도달한 난세포에는 많은 난황구들이 하나의 커다란 난황괴(yolk mass)를 형성하고 있었다. 이 시기의 난세포의 난막은 세포질과 여포세포층 사이에 얇게 형성되었다.

• 대한전자공학회논문지SP
• /
• 제40권6호
• /
• pp.41-50
• /
• 2003

디지털 워터마킹 기술은 디지털 콘텐츠의 불법 복제를 방지하기 위해 디지털 데이터에 사람이 감지할 수 없는 정보를 은닉한다. 본 논문에서는 3차원 메쉬 모델(mesh model)에 대한 적응형 워터마킹 방법을 제안한다 본 논문에서 제안한 방법에서는 서로 이웃하는 꼭지점 좌표들 사이의 공간적 상관성에 따라 워터마크를 삽입하며, 이는 사람의 눈에 잘 감지되지 않는 지역에 워터마크를 강하게 삽입하고 그렇지 않은 지역에는 약하게 삽입하는 적응형 워터마킹 기술이다., 우선, 3차원 메쉬 모델을 운행(traversing)하여 삼각형 스트립(triangle strip)을 생성하고, 모든 꼭지점 좌표를 구 좌표계(spherical coordinate system)로 변환시킨다. 그리고, 3차원 모델의 지역적 외관을 결정하는 꼭지점 좌표 값들의 변화량을 계산한 후, 워터마크 신호를 계산한 변화량의 크기에 따라 유연하게 꼭지점 좌표 값에 삽입시킨다. 본 논문에서 제안한 워터마크 방법이 워터마크 신호의 비지각성(imperceptibility)을 크게 개선시킬 수 있음을 실험을 통해 검증했으며, 제안한 방법의 강인성 (robustness)에 대한 BER (bit error rate) 결과를 제시하였다.

• 한국언어정보학회지:언어와정보
• /
• 제14권1호
• /
• pp.113-144
• /
• 2010

The primary goal of this paper is to find a feasible way to answer the question: Does the similarity in meaning between verbs relate to the similarity in their subcategorization? In order to answer this question in a rather concrete way on the basis of a large set of English verbs, this study made use of various language resources, tools, and statistical methodologies. We first compiled a list of 678 verbs that were selected from the most and second most frequent word lists from the Colins Cobuild English Dictionary, which also appeared in WordNet 3.0. We calculated similarity measures between all the pairs of the words based on the 'jcn' algorithm (Jiang and Conrath, 1997) implemented in the WordNet::Similarity module (Pedersen, Patwardhan, and Michelizzi, 2004). The clustering process followed, first building similarity matrices out of the similarity measure values, next drawing dendrograms on the basis of the matricies, then finally getting 177 meaningful clusters (covering 437 verbs) that passed a certain level set by z-score. The subcategorization frames and their frequency values were taken from the ICE-GB. In order to calculate the Selectional Preference Strength (SPS) of the relationship between a verb and its subcategorizations, we relied on the Kullback-Leibler Divergence model (Resnik, 1996). The SPS values of the verbs in the same cluster were compared with each other, which served to give the statistical values that indicate how much the SPS values overlap between the subcategorization frames of the verbs. Our final analysis shows that the degree of overlap, or the relationship between semantic similarity and the subcategorization frames of the verbs in English, is equally spread out from the 'very strongly related' to the 'very weakly related'. Some semantically similar verbs share a lot in terms of their subcategorization frames, and some others indicate an average degree of strength in the relationship, while the others, though still semantically similar, tend to share little in their subcategorization frames.

• 한국세라믹학회지
• /
• 제48권2호
• /
• pp.183-188
• /
• 2011

In this article, the effect of the crystal structural environment of $Pr^{3+}$ ions on the photoluminescence (PL) characteristics of double tungstates, such as $A(M_{1-X}Pr_X)W_2O_8$ (A=Li, Cs, M = In, Y, Sc, La; $0.007{\leq}x{\leq}0.1$) and $La_{1.96}Pr_{0.04}W_3O_{12}$ are characterized. By varying the ion radius in A and M sites, the structural environment of $Pr^{3+}$ ions were modified. The structural criteria, that is, the point charge electrostatic potentials V around the $Pr^{3+}$ activator, were calculated using the crystal structural parameters. The point charge potential V can be a valid criterion for $^3P_o$ quenching in various double tungstates. When the calculated V values are large (> 6.0), the luminescence from the $^3P_0$ level becomes dominant. When the calculated V values are about 3.8, the $^1D_2$ line appears weakly but $^3P_0$-level luminescence is absent. When the calculated V values are small (< 2.0), the luminescence from the $^1D_2$ level becomes dominant and $^3P_0$-level luminescence is absent. At 2.0$^3P_o$ quenching to $^1D_2$ level occurs substantially in accordance with the structural criterion of the point charge potential model.

• 한국환경과학회지
• /
• 제14권3호
• /
• pp.297-309
• /
• 2005

Recently air quality modeling studies for industrial complex and large cities located in the coastal regions have been carried out Especially, the representation of atmospheric flow fields within a model domain is very important, because an adequate air quality simulation requires an accurate portrayal of the realistic three­dimensional wind fields. Therefore this study investigated effect of using high resolution terrain height data and FDDA with observational data to reflect local characteristics in numerical simulation. So the experiments were designed according to FDDA and the detail terrain height with 3sec resolution or not Case 30s was the experiment using the terrain height data of USGS without FDDA and Case 3s was the experiment using the detail terrain height data of Ministry of Environment without FDDA and Case 3sF was experiment using the detail terrain height data of Ministry of Environment with FDDA. The results of experiments were more remarkable, In Case 3s and Case 3sF, temperature indicated similar tendency comparing to observational data predicting maximum temperature during the daytime and wind speed made weakly for difference of terrain height Also Case 3sF had more adequate tendency than Case 3s at dawn.

• 한국대기환경학회지
• /
• 제25권4호
• /
• pp.304-315
• /
• 2009

Numerical simulations were carried out to understand the effect of Sea Surface Temperature (SST) spatial distribution on regional circulation. A three-dimensional non-hydrostatic atmospheric model RAMS, version 6.0, was applied to examine the impact of SST forcing on regional circulation. New Generation Sea Surface Temperature (NGSST) data were implemented to RAMS to compare the results of modeling with default SST data. Several numerical experiments have been undertaken to evaluate the effect of SST for initialization. First was the case with NGSST data (Case NG), second was the case with RAMS monthly data (Case RM) and third was the case with seasonally averaged RAMS monthly data (Case RS). Case NG showed accurate spatial distributions of SST but, the results of RM and RS were $3{\sim}4^{\circ}C$ lower than buoy observation data. By analyzing practical sea surface conditions, large difference in horizontal temperature and wind field for each run were revealed. Case RM and Case RS showed similar horizontal and vertical distributions of temperature and wind field but, Case NG estimated the intensity of sea breeze weakly and land breeze strongly. These differences were due to the difference of the temperature gradient caused by different spatial distributions of SST. Diurnal variations of temperature and wind speed for Case NG indicated great agreement with the observation data and statistics such as root mean squared error, index of agreement, regression were also better than Case RM and Case RS.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2010년도 춘계학술발표대회
• /
• pp.35.1-35.1
• /
• 2010

The Cu(In,Ga)Se2(CIGS) thin film solar cells have been achieved until almost 20% efficiency by NREL. These solar cells include chemically deposited CdS as buffer layer between CIGS absorber layer and ZnO window layer. Although CIGS solar cells with CdS buffer layer show excellent performance, many groups made hard efforts to overcome its disadvantages in terms of high absorption of short wavelength, Cd hazardous element. Among Cd-free candidate materials, the CIGS thin film solar cells with Zn compound buffer layer seem to be promising with 15.2%(module by showa shell K.K.), 18.6%(small area by NREL). However, few groups were successful to report high-efficiency CIGS solar cells with Zn compound buffer layer, compared to be known how to fabricate these solar cells. Each group's chemical bah deposition (CBD) condition is seriously different. It may mean that it is not fully understood to grow high quality Zn compound thin film on the CIGS using CBD. In this study, we focused to clarify growth mechanism of chemically deposited Zn compound thin film on the CIGS, especially. Additionally, we tried to characterize junction properties with unfavorable issues, that is, slow growth rate, imperfect film coverage and minimize these issues. Early works reported that film deposition rate increased with reagent concentration and film covered whole rough CIGS surface. But they did not mention well how film growth of zinc compound evolves homogeneously or heterogeneously and what kinds of defects exist within film that can cause low solar performance. We observed sufficient correlation between growth quality and concentration of NH3 as complex agent. When NH3 concentration increased, thickness of zinc compound increased with dominant heterogeneous growth for high quality film. But the large amounts of NH3 in the solution made many particles of zinc hydroxide due to hydroxide ions. The zinc hydroxides bonded weakly to the CIGS surface have been removed at rinsing after CBD.

• 대한화학회지
• /
• 제45권5호
• /
• pp.401-412
• /
• 2001

$H_{2n+1}^+$ (n=1~6) cluster들에 대하여 높은 수준의 순 이론적(ab initio) 양자역학적 방법을 사용하여 분자 구조, 진동 주파수(vibrational frequency), 그리고 해리 에너지 등을 계산하였다. 분자구조는 $H^+_g$까지는 TZ2P+ d CCSD(T) 수준에서 그리고 $H_{11}^+$과 $H_{13}^+$에 대해서는 TZ2P CCSD(T) 수준까지 최적화하였다. 진동 주파수는 여러 basis set에서 SCF 방법으로 계산하였으며, 본 연구에서 최적화된 모든 분자구조들이 local minimum 구조임을 확인하였다. $H_{2n+1}^+$로부터 $H_2$ 의 해리 에너지($D_e$)는 각각의 최적화된 분자구조에서의 에너지 차로부터 계산하였으며, 영점 진동에너지(ZPVE)를 고려하여, 지금까지의 이론 및 실험결과($D_0$)와 비교하였다.

• 한국정보통신학회논문지
• /
• 제14권2호
• /
• pp.369-374
• /
• 2010

다각형 내부에 위치한 두 점 사이의 최단 경로는 다각형의 외부를 지나지 않는 경로 중에서 길이가 가장 짧은 경로를 말한다. 일반적인 단순 다각형에서 최단 경로를 구하는 선형 시간 알고리즘은 매우 복잡한 과정으로 알려진 삼각분할을 전처리과정으로 수행해야 한다. 따라서 이론적으로는 최적인 시간복잡도를 갖지만, 실제적으로는 구현이 어려울 뿐만 아니라 입력의 크기가 매우 크지 않은 한 수행 시간이 효율적이지 못하다. 본 논문에서는 다각형 내부의 모든 점들을 볼 수 있는 선분이 존재하는 다각형 부류인 선분가시 다각형의 내부에 위치한 두 점 사이의 최단 경로를 구하는 선형 시간 알고리즘을 제시한다. 이 알고리즘은 삼각 분할을 필요로 하지 않으며, 볼록 외피 구축 등 단순한 절차만으로 구성되어 있어 구현이 용이할 뿐만 아니라 수행 속도도 빠르다

• Biomolecules & Therapeutics
• /
• 제29권4호
• /
• pp.384-391
• /
• 2021

Currently, the expanding recreational use of synthetic cannabinoids (SCBs) threatens public health. SCBs produce psychoactive effects similar to those of tetrahydrocannabinol, the main component of cannabis, and additionally induce unexpected pharmacological side effects. SCBs are falsely advertised as legal and safe, but in reality, SCB abuse has been reported to cause acute intoxication and addictive disorders. However, because of the lack of scientific evidence to elucidate their dangerous pharmacological effects, SCBs are weakly regulated and continue to circulate in illegal drug markets. In the present study, the intravenous self-administration (IVSA) paradigm was used to evaluate the abuse potential of three SCBs (AM-1248, CB-13, and PB-22) in rats. All three SCBs maintained IVSA with a large number of infusions and active lever presses, demonstrating their reinforcing effects. The increase of active lever presses was particularly significant during the early IVSA sessions, indicating the reinforcement-enhancing effects of the SCBs (AM-1248 and CB-13). The number of inactive lever presses was significantly higher in the SCB groups (AM-1248 and CB-13) than that in the vehicle group, indicating their impulsive effects. In summary, these results demonstrated that SCBs have distinct pharmacological properties and abuse potential.