• 암석학회지
• /
• 제8권2호
• /
• pp.81-91
• /
• 1999

옥천화강암은 옥천읍 일대에서 원형상으로 분포하며, 그 북부와 동부 및 남부에서 옥천층군을 관입한 쥬라기 암체이며 그 서부에서 백악기의 석영반암류에 의해 관입된다. 이 암체는 중립질의 흑운모 화강으로서 유색광물부(mafic enclave)가 종종 발달하며 북부 주변에서는 미약한 엽리구조를 이루기도 한다. 구성광물은 석영, 사장석, 알칼리장석, 흑운모, 스펜과 녹리석 등이다. 복부일부에 발달하는 미립질과 줄무늬 석영, 흑운모와 이차광물인 백운모 등이 이루는 엽리는 옥천화강암질 마그마의 유동중에 주변암에 의해 형성된 구조이다. QAP 모드분석에서 몬조화강암-화강섬록암에 도시되는 과알루미나암질로서 캘크 알칼리례열에 속하는 분화경향을 가진다. SiO2 대 주원소 그리고 미향원소 등의 관계도에서 단일 마그마의 분화경향을 뚜렷이 가진다. 콘드라이트로 표준화한 희토류원소는 경(LREE)에서 중(HREE)으로 갈수록 점진적으로 결핍되며 Eu/Eu*는 0.84의 부 이상값(negative anomaly)을 가져 대체로 국내 쥬라기 화강암류와 유사한 특성을 가진다. 동시충돌대의 지구조적환경에서 I-형의 지각물질이 용융하여 형성된 화강암질 마그마가 다소 빠르게 상승하여 옥천층군내에 정치된 암체이다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.1740-1743
• /
• 2007

In this study, two types of fatigue tests were conducted. First, cyclic bending tests were performed using the micro-bending tester. A four-point bending test method was adopted, because it induces uniform stress fields within a loading span. Second, thermal fatigue tests were conducted using a pseudo power cycling machine which was newly developed for a realistic testing condition. The pseudo-power cycling method makes up for the weak points in a power cycling and a chamber cycling method. Two compositions of solder are tested in all test condition, one is lead-free solder (95.5Sn4.0Ag0.5Cu) and the other is eutectic lead-contained solder (63Sn37Pb). In the cyclic bending test, the solder that exhibits a good reliability can be reversed depending on the load conditions. The lead-contained solders have a longer fatigue life in the region where the applied load is high. On the contrary, the lead-free solder sustained more cyclic loads in the small load region. A similar trend was detected at the thermal cycling test. A three-dimensional finite element analysis model was constructed. A finite element analysis using ABAQUS was performed to extract the applied stress and strain in the solder joints. A constitutive model which includes both creep and plasticity was employed. Thermal fatigue was occurred due to the creep. And plastic deformation is main damage for bending failure. From the inelastic energy dissipation per cycle versus fatigue life curve, it can be found that the bending fatigue life is longer than the thermal fatigue life.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2007년도 제34회 KOSCO SYMPOSIUM 논문집
• /
• pp.13-18
• /
• 2007

When triple flames propagated in a diverging channel, the effects of fuel dilution on the lift-off characteristics of triple flames were investigated. A multi-slot burner was used to stabilize the lift-off flame especially at weak fuel concentration gradients. It was reported that there is a maximum propagation velocity at a critical concentration gradient in an open jet regardless of fuel dilution. The enhancement of a diffusion flame affected to increase the propagation velocity around critical concentration gradients. However, the influence of a confined channel on the structure of triple flames according to fuel dilution needs to be investigated compared with an open jet case. This study aimed to examine the effect of a confined channel on the structure and the propagation velocity of the triple flames according to fuel dilution. Lift-off height and propagation velocity of triple flames were investigated by employing three kinds of fuel compositions diluted by nitrogen (0%, 25%, 50% $N_2$), Fuel dilution reduced the propagation velocity of triple flame in a confined channel mainly due to the decrease of flame temperature in premixed branch. Despite the difference in fuel dilution, the propagation velocity has a maximum value at a specific fuel concentration gradient even though the critical concentration gradient increases with fuel dilution. And the critical concentration gradient in a confined channel is larger than that in an open jet due to enhancement of convective diffusion.

• 한국응용과학기술학회지
• /
• 제30권4호
• /
• pp.592-601
• /
• 2013

이 연구는 3-(1,8나프탈이미도)프로필메타아크릴레이트(NIPM)와 GMA공중합체의 합성과 물성에 관한 과제로서 나프탈이미드 발색단을 가진 공중합체의 조성, 모노머 반응성비, 공명효과(Q)와 극성효과 (e), 형광특성 등을 조사하였다. Azobisisobutyronitronitryl(AIBN) 개시제와 dimethylformamide(DMF) 용매를 $60^{\circ}C$에서 공중합하였다. Fineman-Ross(F-R)와 Kelen-$T\ddot{\bar{u}}d\ddot{\tilde{o}}s$(K-T)법으로 부터 단량체 반응성비를 구하였으며, $r_1$값이 $r_2$보다 크게 나타났다. NIPM이 공중합체내에서 GMA보다 더 많음을 알 수 있다. 380 nm에서 약한 분자형광띠와 460 nm에서 강한 중합체 엑시머 형광띠가 나타났다.

• The Journal of Advanced Prosthodontics
• /
• 제6권5호
• /
• pp.333-345
• /
• 2014

PURPOSE. Bonding agents (BA) are the crucial weak link of composite restorations. Since the commercial materials' compositions are not disclosed, studies to formulize the optimum ratios of different components are of value. The aim of this study was to find a proper formula of BAs. MATERIALS AND METHODS. This explorative experimental in vitro study was composed of 4 different sets of extensive experiments. A commercial BA and 7 experimental formulas were compared in terms of degree of conversion (5 experimental formulas), shear bond strength, mode of failure, and microleakage (3 experimental formulas). Statistical analyses were performed (${\alpha}$=.05). The DC of selected formula was tested one year later. RESULTS. The two-way ANOVA indicated a significant difference between the shear bond strength (SBS) of two tissues (dentin vs. enamel, P=.0001) in a way that dentinal bonds were weaker. However, there was no difference between the four materials (P=.283). The adhesive mode of failure was predominant in all groups. No differences between the microleakage of the four materials at occlusal (P=.788) or gingival (P=.508) sites were detected (Kruskal-Wallis). The Mann-Whitney U test showed a significant difference between the microleakage of all materials (3 experimental formulas and a commercial material) together at the occlusal site versus the gingival site (P=.041). CONCLUSION. A formula with 62% bisphenol A-glycidyl methacrylate (Bis-GMA), 37% hydroxy ethyl methacrylate (HEMA), 0.3% camphorquinone (CQ), and 0.7% dimethyl-para-toluidine (DMPT) seems a proper formula for mass production. The microleakage and SBS might be respectively higher and lower on dentin compared to enamel.

• 대한한방소아과학회지
• /
• 제22권2호
• /
• pp.19-35
• /
• 2008

Objectives : As obese children have been increased, the interest in the impact of obesity on growth also have been increased. This study is to examine relations between obesity and skeletal maturity by analyzing body compositions and bone age. Methods : Subjects were composed of 233 children from 6 years to 17 years of age, without any other diseases related to growth, who visited the department of pediatrics, OO oriental medicine hospital and measured their body composition (body mass index, body fat ratio, fitness score) and bone age. Results : 1. As body mass index was increased, the skeletal maturity significantly was also increased. 2. As the mean of bone maturity was increased, the BMI was increased from the underweight type to the normal type to the overweight type; the bone maturity was increased as the fat ratio was increased from the normal type to the obese type to the excessively obese type; and the bone maturity was higher in the weak, obese type than the normal type when classified according to the Fitness Score. 3. The bone maturity of the overweight group in the BMI classification and excessively obese group in the fat ratio classification significantly were increased. 4. Skeletal maturity significantly was increased in children who developed secondary sexual character. 5. The significance of obesity causing increase of the skeletal maturity was higher in boys than in girls. 6. Only in the case of children without development of secondary sexual character, obesity caused an significant increases in the skeletal maturity. Conclusions : Obesity could cause the increase of skeletal maturity, and the obesity could affect more to the boys than girls and more to the children than teenagers.

• 생명과학회지
• /
• 제9권6호
• /
• pp.722-727
• /
• 1999

본 연구는 연어 뇌 연접의 단백질구성에 대한 기초연구로서, 기억형성에 중요한 역활을 하는 NMDA 수용체의 분포와 PTK에 의한 인산화에 대하여 조사하였다. 본 실험에 사용한 연어 뇌의 PSD 분획에서는 Coomassie로 염색할 경우 20여개 분명한 단백질띠를 확인할 수 있었으며, 소량으로 존재하여 전체적으로 도말되어 보이는 펩타이드의 수는 알 수 없었다. 이들 중 180kD 크기의 단백질은 phosphotyrosine 특이성 항체에 상대적으로 잘 인식이 되었다. 또한 이 180 kDa의 단백질들은 쥐에 있어서의 NR2A 및 NR2B의 위치인 분자량 약 180kD의 위치와 동일한 것으로 보아 연어에 있어서도 후각기능에 관계하는 NR2A 및 NR2B가 존재함을 추정할 수 있다.

• 한국의류학회지
• /
• 제35권8호
• /
• pp.982-990
• /
• 2011

Kenaf fiber can be obtained by decortications of the kenaf plant stem. The properties of the kenaf fiber treated by alkali (NaOH) were investigated by spectrocolorimeter, SEM, X-ray diffractometer, FT-IR and TGA. The kenaf fibers treated by alkali became darker and their Munsell color values changed from Y (yellow) to YR (yellowred) according to an increased NaOH concentration. SEM observation of the kenaf fibers showed that their crimps were developed and their surfaces were cleaned by the removal of protruding ends and impurities after alkali treatments. In the x-ray diffraction analysis, the structures of the fibers were found in the form of cellulose I when treated with a 0-16% alkali concentration and cellulose II when treated with over 20%. It was also confirmed that the crystallinity was lowered according to an increased NaOH concentration. The change of fiber compositions was investigated in FT-IR analysis. Strong band of $1,738cm^{-1}$ and asymmetrical stretching strong bands of $1,630-1,600cm^{-1}$ in spectrum (which represent pectin) were not found in the samples because the pectin was removed by the alkali treatment. Weak bands of $1,728-1,730cm^{-1}$ and peaks of $1,245-1,259cm^{-1}$ (which represent hemicellulose) and peaks of $1,592cm^{-1}$, $1,504cm^{-1}$, $1,462cm^{-1}$ and $1,429cm^{-1}$ (which are related to lignin) were not found or reduced in the samples treated with a concentration over 20%. TGA indicated that the kenaf fiber had the better hydrophilic properties by alkali treatment. The higher Tmax in TGA and the higher thermal stability when treated by alkali with the higher concentration. The fibers treated with an alkali concentration over 30% did not show any changes in Tmax.

• 열처리공학회지
• /
• 제23권2호
• /
• pp.96-103
• /
• 2010

$Ni_3Al$ is known as a good high temperature structural material because of high yield strength at ambient temperature. However, it is too brittle to use as a structural material because of their weak grain boundary. In this work, orientation measurement and related mechanical properties of directionally solidified NiAl/$Ni_3Al$ two-phase alloys with various compositions (Ni-23~27 at.%Al) were investigated for developing multi-phase DS-processed alloys with the growth rates of 10, 50 and 100 ${\mu}m/s$ in a modified Bridgeman type furnace. It was found that the multi-phase microstructures such as the $\gamma$ dendrite +${\gamma}'$ matrix duplex microstructure was formed in the hypoeutectic composition of 23 at.%Al, $\beta$ dendrite +${\gamma}'$ matrix duplex microstructure in the hypereutectic composition of 26 and 27 at.%Al. And ${\gamma}'$ single phase was formed in the composition of 24.5 and 25 at.%Al. The hypoeutectic alloy including $\gamma$ dendrites with ${\gamma}'$ matrix showed a large elongation of over 70% at room temperature. However, the room-temperature tensile elongation decreased with increasing Al contents because the volume fraction of brittle $\beta$ dendrites in the ductile ${\gamma}'$ matrix increased.

• 수산해양기술연구
• /
• 제52권1호
• /
• pp.24-35
• /
• 2016

An acoustic and trawl pilot survey using a small vessel was conducted in Jinhae bay of the South Sea of South Korea on April 13~14, May 11~13 and June 8~10, 2015. During the survey, acoustic data was collected and bottom trawls were conducted at the same time. First, various noises were eliminated by using the Park method based on the Wang method (Wang et al., 2015; Park et al., 2015), the species compositions and catch rate from each bottom trawl were observed, and spatial distribution of fishery resources in the water column and their nautical area scattering coefficient (NASC) were investigated through acoustic data. During the entire survey period, 12 orders, 33 families and 41 species were caught. The most caught species in April, May and June were Okamejei kenojei, Zoarces gilli and Pholis nebulosa, respectively. Fish schools were observed near the line of net mouth height in April. Numerous weak scatters were presented on the echograms in May and June. Many fish schools appeared in between the water surface and 20 m deep in May. The NASC value from entire water columns was the lowest in April ($35.9m^2/n{\cdot}mile^2$) and highest in June ($1541.3m^2/n{\cdot}mile^2$).