• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.10
• /
• pp.1225-1231
• /
• 2014

This paper presents the performance characteristic of a Francis hydro turbine with an inline casing. This turbine is designed for city water supply system. Due to large changes in ground elevation with high points and low points, some systems may experience larger-than-normal required pressures in areas with low ground elevations. One way to dissipate these excess pressures is by the use of an inline-turbine instead of an inline-pressure reducing valve. For best applicability and minimal space consumption, the turbine is designed with an inline casing instead of the common spiral casing. As a characteristic of inline casing, the flow accesses to the runner in the radial direction, showing a low efficiency. The installation of vanes improves the internal flow and gives the positive encouragement to the output power. For the power transmission to the outside of the turbine casing from the runner axis, a belt passage is designed in the inline casing, as its influence, the region after the belt passage shows a relatively low output power. The clearance gap in the runner side space is considered, in which a small volume of flow is contracted into the clearance gap, forming the leakage flow. The leakage flow leads to a decrease in the efficiency.

• Journal of Distribution Science
• /
• v.14 no.7
• /
• pp.63-70
• /
• 2016

Purpose - The purpose of this study was to examine the variations in emotions during vacation and to explore if such variations depend on psychological distance perceived by vacationers. We proposed that there are changes in affect balance during the course of vacation as well as the mental construal of psychological distance. Research Design, Data, and Methodology - Repeated measures ANOVA was used to examine the variation in emotion and psychological distance of 66 holiday makers who were traveling to different destination for vacation. Data were collected in 2 months with the help of a travel agency. Results - We find that there are variations in emotions during the vacation at different points in time as well as perceived psychological distance. Also we find some evidence that suggests emotional happiness does depend on perceived mental distance to some extent. Conclusion - Our study replicates the findings of previous studies in a novel way and illustrates the robustness of the nature of emotions during vacation and indicates certain time points where the happiness of vacationers can be enhanced. Perceived psychological distance do have an effect on how happy an individual feels during the vacation.

• Journal of Korean Physical Therapy Science
• /
• v.5 no.3
• /
• pp.625-631
• /
• 1998

The Halliwick method was developed by Mr. James McMillan, a Canadian engineer of fluid mechanics. In 1949 he started to teach physically handicapped girls to swim at the "Halliwick school for crippled Girls" in London. The Halliwick method has four important basic units, as is shown in Fig 1. This constribution only deals with the structures or the practical part of the method. This part is also known as the 10-point programme. Before the characteristics of the 10 points are dealt with seperately, a few general remarks about these ponits have to be discussed. Of all things happening in the water, fun is the most important one. Swimming is fun! Swimming is taught in an order McMillan describes as: mental Adjustment(M.A), balance restoratiion(B.R.), inhibition(Inh.), and facilitation(Fac.). The 10 points of structure are linked to each other as well as to the learning process as is shown in Fig 3. The Halliwick method, which was devised by James McMillan, has proved to be a very successful way of establishing the basic principles as they have described in this article.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.44 no.4
• /
• pp.99-106
• /
• 2002

This research was performed to study the actual behavior of 1-2W type pipe greenhouse under the influence of typhoon by measuring the various strains in structural materials. These results can eventually be utilized in the design criteria as well as in the modification of conventional equation for calculating more realistic wind loads. The first data under the influence of Typhoon Olga arrived in Jinju on Aug. 1999 were obtained by strain gage with 10 sensor points. According to the data obtained, the typical variation of strain depending on wind pattern could be observed. The strains in structural frame were fluctuated very sensitively depending on the direction and magnitude of wind velocity. But some of the data were lost or missed by system's failure. A kind of inherent vibration pattern of greenhouse pipe frame was observed from the plotted data, but this phenomenon is not so clear as to be separated from the overall fluctuation so far. This experimental research is expected to be continued as a long term project to measure and analyze the strain pattern of structural frame depending on the various locations and section characteristics by way of adopting more efficient instrument with sufficient number of measuring points and accuracy.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.32 no.2
• /
• pp.66-75
• /
• 2009

As the population of the silver generation is increasing, the importance and effects of the market for the silver generation are also growing. We segments the categories of the silver generation into six sub-segments using based on the factors like life style, life stage, or performing role from the point of view in communication industry. After segmenting those categories, we observed the experience of each segmented group in detail. Likewise, we executed both FGD(Focused Group Discussion) and participants' observations together to effectively collect the expressed and/or potential needs. Customer's experience was collected along the touch points and customer corridors after dividing the customer's experience world into two groups; communication styles in usual life (life log) and direct contact channels. The effects of delivering an affirmative customer's experience would be empowered by eliminating negative experiences or complementing affirmative experiences. For this purpose, this paper presents the improvement points for the better customer's experience based on the observed customer's experience. This paper presented a sample way of customer-centric approach to design the services or products in the communication industry. In addition to that, the analyzed results of this paper will be useful to find out an effective approach to the market of silver generation.

• Journal of Agricultural Extension & Community Development
• /
• v.17 no.3
• /
• pp.587-606
• /
• 2010

Theme trail construction should be changed from existing form which connects line to line, or point to line. It should be developed into area form. The project of Trail construction must be converted in area form. The aggregate of the points which is a base element of walk is a line, and the harmonious connection of various line is the area. The close relationship with points and lines is important to operate the project of trail construction in area form effectively. Subject of the project of Theme trail construction of area form must become the village residents which are being contiguous in trail. They must operate management and about trail. The project of Trail construction of area form the plan making is established and if the subjects which, will operate and manage that place are decided upon according to theme must construct the trail of the wide area concept which connects the trail of that trail and neighborhood. If becomes like that local resident and the citizen will be able to coexist with mediation of Trail. If the project of Trail construction of village resident leading is propelled applying rural amenity resources in a way, the trail model which one phases advances could be presented for ecological, economical and cultural.

• Korean Journal of Computational Design and Engineering
• /
• v.22 no.1
• /
• pp.59-69
• /
• 2017

Internal capacity of a refrigerator is an important indicator for design and purchasing criteria. The components facing the internal space may have holes or gaps between parts. In traditional way, design engineers manually remodeled the parts to fill the holes and the gaps for enclosed boundary of the internal space. Then they calculated internal volume by subtracting the assembly of parts from its enclosing volume. However, filling holes and gaps is not an automated process requiring a plenty of labor and time. In this research, we have developed a voxel-based method to estimate the internal volume of a refrigerator automatically. It starts transforming all components facing the interior space into voxels and fills all holes and gaps automatically by the developed hole-filling algorithm to form a completely closed boundary of the assembly. Then, it identifies the boundary voxels that are facing to the internal voxels with any part of the component. After getting the intersection points between the boundary voxels and the surfaces of components, it generates the boundary surface of triangular facets with the intersection points. Finally, it estimates the internal volume by adding volume of each tetrahedron composed of a triangle of boundary surface and an arbitrary point.

• Computational Structural Engineering
• /
• v.10 no.4
• /
• pp.117-130
• /
• 1997

In this paper, a modified 10-node equivalent solid element(MQM10 element), which has smallest degrees of freedom among 3-dimensional solid elements accounting bending deformation as well as extensional and shear deformations of isotropic plates, is proposed. The proposed MQM10 element exhibits stiffer bending stiffness due to the reduction of degrees of freedom from 20-node element or Q11 element. As an effective way to correct the relative stiffness stiffening phenomenon, the modification equation of Gauss sampling points is proposed. The quantity of modification is a function of Poisson's ratio. The effectiveness of MQM10 element is tested by applying it to several examples. It is noted that the results of static and free vibration analysis of isotropic plates using MQM10 elements show a good agreement with those using 20-node element.

• Korean Journal of Acupuncture
• /
• v.25 no.4
• /
• pp.49-58
• /
• 2008

Objectives and Methods : The present study was to investigate the change of acupuncture point location of gallbladder meridian in head by way of reviewing classical literatures. Result and Conclusions : 1. The locations of acupuncture points closed-by anatomical marks such as GB1, GB2, GB3, GB11, GB12, GB19, GB20 are clear and accurate. 2. The expression of acupuncture points' locations of GB4, GB5, GB6, GB8 and GB10 are obscure in classical literature, but their locations became clear and objective in recent literatures. 3. The locations of GB9 and GB13 are open to dispute but WHO standard acupuncture point seems to be resonable. 4. In classical literature, the length from the midpoint of the anterior hairline to the midpoint of the posterior hairline is 12 B-cun, and the length from the midpoint of the anterior hairline to the GB19 is 5 cun, 5.5 cun or 6.5 cun. We presume that the length from GB15 to GB19 might have been measured by F-cun.

• Journal of Korean society of Dental Hygiene
• /
• v.17 no.5
• /
• pp.805-816
• /
• 2017

Objectives: The purpose of this study is to analyze the oral health knowledge among workers at nursing homes, and needs to educate them on elderly oral care. Methods: A self-reported questionnaire was filled out by 241 workers at nursing homes in Gwangju and Jeonnam, Korea from May to June, 2016. The data were analyzed with the SPSS 19.0 program for independent t-test or one-way ANOVA analysis. Results: The data analysis showed that workers at nursing homes had lower knowledge about periodontal diseases (65.1%) than about denture management (78.5%). The knowledge of periodontal disease and denture management of workers with experience of oral care education for elderly was significantly higher than that of non-experienced ones (p<0.01). On the question whether those workers should get oral health care education is necessary or not, respondents answered positively (They scored 4.10 points on the 5-point Likert scale from 1 point - Not at all to 5 points - definitely yes). Conclusions: It is necessary to provide elderly oral care education to workers at nursing homes. Furthermore, oral health professionals should be deployed for systematic and practical oral care for elderly.