• ETRI Journal
• /
• 제24권6호
• /
• pp.409-414
• /
• 2002

This paper investigates the absorption and emission changes in poly(di-n-hexylfluorene)s. We prepared the poly(di-n-hexylfluorene)s end capped with 2-bromofluorene, 2-bromo-9,9-di-n-hexylfluorene, and 9-bromoanthracene through Ni (0) mediated polymerization. In addition, we also synthesized a structurally distorted copolymer of 2,7-dibromo- 9,9-di-n-hexylfluorene and 9,9-bis(4-bromophenyl) fluorene end capped with 2-bromofluorene through the same polymerization method. The absorption and emission changes of these polymers between before and after thermal annealing in a nitrogen atmosphere clarify the role of aggregate/excimer formation in poly(fluorene)s. The large absorption changes must be attributed to aggregate formation (ground state interaction), which causes only a slight red shift of the vibronically structured emission bands. We assign the additional long wavelength emission as an excimer band (excited state interaction), which is preferably formed at chain ends.

• 대한전자공학회논문지SD
• /
• 제41권2호
• /
• pp.33-38
• /
• 2004

측면 연마된 편광 유지 광섬유와 폴리머 평면도파로가 결합된 비대칭 방향성 결합기를 이용하여 가변 광필터를 구현하였다. 소자의 최상부층 위에 형성된 마이크로 스트립 히터에 의하여 유도된 폴리머 평면도파로의 열광학 효과는 결합기의 공진파장을 이동시킨다. 제작된 소자는 720 ㎽의 인가 전력으로 230 ㎚ 이상의 넓은 가변 범위를 보였다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2005년도 추계종합학술대회
• /
• pp.635-638
• /
• 2005

In this paper, we present thermal characteristics of a fiber Bragg grating(FBG) filter, including peak reflectivity, FWHM bandwidth, and wavelength shift by various refractive index change. The reflection spectrum of a FBG filter with refractive index change is affected by its thermal stability.

• 대한전기학회논문지
• /
• 제33권5호
• /
• pp.173-180
• /
• 1984

The spectra of scattering light fromlaser-produced plasma near its fundamental and second harmonic wavelength were observed respectively by means of spectroscopic technique. The experimental results and the generation mechanism of nonlinear effects such as the second garmonics and the brillouin scattering were analysed theoretically. The spectra of reflected laser light became wider than that of incident laser light. And the peak of spectrum of reflected light shifted to red-side from that of incident light. The second harmonic light is generated from the nonlinear interaction of the incident laser light and the electron plasma wave excited in resonance region by the oblique incidence of laser light to the plasma. The Brillouin backscattering from laser-produced plasmas of hydrogen and deuterium has shown an isotope effect in the red-side region of the generated second harmonic light. This isotope shift is explained by the parametric instability at the cutoff (resonance) region using frequency-and phase-matching conditions of the waves.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2000년도 춘계학술발표대회 논문집
• /
• pp.163-166
• /
• 2000

Fiber Bra99 grating (FBG) sensor, one of the fiber optic sensor (FOS) offers lots of advantages for structural health monitoring due to its multiplexing capability. Also, it is proper to measure the structural vibration with no mass concentration effect. In this paper, we constructed two sensor arrays composed of 9 FBG sensors for the vibration and mode sensing of a composites beam. For an accurate measurement of wavelength shift, a signal processing board with an electric circuit based on time-interval counting was developed. This sensor system showed a good resolution of dynamic strain (<10${\mu}{\varepsilon}$). Using this sensor system, dynamic strains at 9 points of composite beam was measured and strain measured mode shape of the beam was calculated from the acquired strains and compared with numerical results by ABAQUS.

• The Korean Journal of Ceramics
• /
• 제3권2호
• /
• pp.134-138
• /
• 1997

$Dy^{3+}-(or Tm^{3+}-)$ doped $Ga_2O_3 \;and\; ZnGa_2O_4$ phosphors were prepared using the solid state reaction method to investigate their photoluminescent characteristics. Under 254 nm excitation, $Dy^{3+}-doped Ga2_O_3$ exhibited two emission bands of 460~505nm and 570~600nm. On the other hand, $Dy^{3+}-(or Tm^{3+}-)$ doped $ZnGa_2O_4 $phosphors exhibited a broad-band emission extending from 330 nm to 610 nm, peaking at about 430 nm(or 370 nm). In this study, an emission peak shift of nealy 50 nm towards longer wavelength region was observed with $Dy^{3+}$ doping in the $ZnGa_2O_4 $.

• 천문학회보
• /
• 제38권2호
• /
• pp.62.1-62.1
• /
• 2013

We present the Exposure Time Calculator of IGRINS (Immersion Grating Infrared Spectrograph). The noises of IGRINS and the simulated emission line can be calculated from the combination of Telluric background emission and absorptions, the emission and transmission of the telescope and instrument optics, and the dark noise and the read noise of the infrared arrays. For the atmospheric transmissions, we apply the simulated spectra depending on the Precipitable Water Vapor (PWV) values. In case of calculation of noises, the user needs to input the expected target magnitude, the weather conditions, and the desired exposure time. In addition to the simulated emission line, the parameters of rest wavelength, line-flux, Doppler shift and line-width are needed. The output would be the expected signal-to-noise for each spectral resolution element. The source-code of IGRINS-ETC v2.1.1 is available to be downloaded on the World Wide Web.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.811-816
• /
• 2004

The tactile force sensor was studied using Fiber Bragg Grating (FBG). The FBG is able to multiplex easily and is immune to electromagnetic environment. A sensor frame was designed to a cantilever beam type. Strain of a beam is related with the peak shift of a bragg wavelength. Finite Element Method (FEM) was used for getting an appropriate thickness from 0.2 mm to 0.3 mm thick. FEM results showed that 0.3 mm thick was suitable for the force range 10 N. The force resolutions of 0.039 N and 0.113 N were obtained with optical spectrum analyser and tunable Fabry-Perot filter, respectively.

• 한국레이저가공학회지
• /
• 제13권4호
• /
• pp.21-24
• /
• 2010

Plasma electrolyte oxidation (PEO) surface treatment of magnesium alloy, an optical analysis method through reflection spectra were measured. As a result, the sample is formed on the membrane form of MgO or $Mg(OH)_2$ is in the form of oxide. The wavelength energy of surface treatment of magnesium alloy sample observed 0.23eV red shift. The measured reflectance spectra observed with the three different signals. This is due to $Mg(OH)_2$ oxide layer formed on porous hole.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.199-202
• /
• 2002

Moire topography method is a well-known non-contacting 3-D measurement method. Recently, the automatic 3-D measurement by moire topography has been required since the method was frequently applied to the engineering and medical fields. 3-D measurement using digital projection moire topography is very attractive because of its high measuring speed and high sensitivity. In this paper, using different N-bucket algorithm method of digital projection moire topography is tested to measuring object with the 2$\pi$-ambiguity problem. Experimental results prove that the proposed scheme is capable of finding measurement errors that decreased more by using the flour-three step algorithm method than the same step in the phase shifting of different pitchs.