• Title/Summary/Keyword: wavelength shift

Search Result 301, Processing Time 0.048 seconds

Design and Fabrication of Holographic Head-up Display System (홀로그래피 Head-up display 시스템의 설계 및 제작)

  • 정만호;송재봉;한영수;유연석
    • Korean Journal of Optics and Photonics
    • /
    • v.5 no.2
    • /
    • pp.225-230
    • /
    • 1994
  • Main parameters and equations necessary for developing the holographic HUD are investigated. Air reflection recording method of obtaining good holographic reflection filters with minimized interference pattern noises is presented. Especially, a new method of correcting the center wavelength shift which takes place after the processing of the DCG film is suggested.gested.

  • PDF

Simulation for the center-wavelength shift of interference filters by temperature variation (온도변화에 따른 간섭필터의 중심파장 이동의 전산모의)

  • 김성화;황보창권
    • Proceedings of the Optical Society of Korea Conference
    • /
    • 2003.02a
    • /
    • pp.80-81
    • /
    • 2003
  • DWDM 필터와 같은 간섭필터는 밴드폭이 좁아지고 투과파장에 해당하는 채널의 수가 증가함에 따라 투과파장의 외부환경에 대한 안정성이 중요하다. 기존의 전자빔 증착법으로 증착된 유전체 다층박막은 일반적으로 미세기둥구조로 인해 낮은 조밀도를 가지기 때문에 외부의 습도나 온도 변화 등에 민감하다. 낮은 조밀도의 유전체 다층박막을 대기 중에 노출되었을 때, 대기 중의 습기가 기둥과 기둥 사이로 침투되어 유효굴절률의 증가로 인하여 박막의 광학두께가 증가하게 되고 결국 스펙트럼이 장파장으로 이동하게 된다. (중략)

  • PDF

Synthesis of Fluorescent Thiophene-derivatized Pentytiptycenes and Their Aggregate Behaviors

  • Song, Jinwoo
    • Journal of Integrative Natural Science
    • /
    • v.3 no.1
    • /
    • pp.28-32
    • /
    • 2010
  • Thiophene-derivatized pentiptycenes were synthesized and characterized by NMR and UV-Vis spectroscopy. Aggregation behavior of thiophene-derivatized pentiptycenes was monitored by the measurement of fluorescence. Fluorescence intensities for the thiophene-derivatized pentiptycenes and thiophene-derivatized pentiptycenes aggregates were compared. There is no shift in the maximum of the emission wavelength. In the range of water fraction between 20% and 40%, the emission intensity of thiophene-derivatized pentiptycene aggregates remains almost identical. Fluorescence efficiency incresaed by about 5 times higher when the thiophene-derivatized pentiptycenes forms the aggregates in solution.

Pump power induced dispersion shift in the germano-silicate optical fiber incorporated with Si nanocrystals

  • Cho, Hye-Jin;Watekar, Pramod R.;Han, Won-Taek
    • Proceedings of the Optical Society of Korea Conference
    • /
    • 2008.07a
    • /
    • pp.411-412
    • /
    • 2008
  • The chromatic dispersion of the germano-silicate optical fiber incorporated with Si nanocrystals was determined with the aid of simulation and demonstrated using experiments, which showed dependence of the launched power and the pump wavelength due to optical nonlinearity of the fiber.

  • PDF

Spectroscopic Studies of Conjugated Uracil $Derivatives^+$

  • Chang Kiu Lee;Young Hie Kim
    • Bulletin of the Korean Chemical Society
    • /
    • v.12 no.2
    • /
    • pp.207-210
    • /
    • 1991
  • Ultraviolet spectra of 5-and 6-uracilyl compounds which contain conjugated double bonds were obtained and their characteristic phenomena were examined. 5-Formyluracil and 6-methyl-5-formyluracil showed bathochromic shifts which should be expected from a conjugated carbonyl compound. 6-Formyluracil did not show any shift in absorbing wavelength. 5-and 6-uracilylacrylic acid derivatives, on the other hand, showed absorption at similar wavelengths, indicating the presence of a hexatriene chromophore. The ratio of ${\Delta}ν/J$ in nuclear magnetic resonance spectra of those compounds decreased drastically as the acrylic acids or esters were converted into amides.

Spectral Behaviors of Unidirectional Lasing from Various Semiconductor Square Ring Microcavities

  • Moon, Hee-Jong;Hyun, Kyung-Sook;Lim, Changhwan
    • Journal of the Korean Physical Society
    • /
    • v.73 no.10
    • /
    • pp.1506-1511
    • /
    • 2018
  • Spectral behaviors of lasing from semiconductor square ring microcavities with structures for unidirectional laser oscillation were investigated. When a tapered structure was introduced, the lasing envelope shifted to a shorter wavelength region. Statistical estimate of the additional loss caused by the tapered structure was carried out by analyzing spectral data from many sets of cavities with various sizes. When a saw-edged structure was introduced, the unidirectional lasing functioned well but no apparent spectral shift was observed due to negligible additional loss.

Fabrication of tunable all-fiber feedback laser and its application (파장가변이 가능한 완전 광섬유형 궤환 레이저 구현 및 응용)

  • Sohn, Kyung-Rak
    • Journal of Advanced Marine Engineering and Technology
    • /
    • v.33 no.8
    • /
    • pp.1220-1225
    • /
    • 2009
  • In this paper, a tunable fiber feedback laser based on the use of Sagnac loop filter and fiber Bragg grating (FBG) is proposed. The Sagnac loop filter using a high birefringence fiber provides precise 0.33-nm channel spacing as a multi-wavelength grid filter. Ni-Cr wire wound on the FBG is useful to induce the thermo-optic effect of the fiber. Two types of FBG structures, which have a different length of wire, are demonstrated to show the wavelength shift and separation. To tune FBG by resistant heat, some current is supplied into the wire. When the wavelength matched with one of the cavity modes of Sagnac loop filter, the mode-locked lasing is occurred. The electrical power sensitivity of the resonant wavelength is measured to 1.75pm/mW. This laser configuration can be applied the electrical power system for monitoring the power fluctuation.

50-GHz AWG Interrogation of a Multiple-FBG Temperature Sensor (50-GHz AWG를 이용한 다중 광섬유격자 브래그 파장 계측)

  • Moon, HyungMyung;Kwak, SeungChan;Kim, JinBong;Yim, Ju-Wan;Park, Dong-Young;Im, Kiegon
    • Korean Journal of Optics and Photonics
    • /
    • v.30 no.6
    • /
    • pp.226-229
    • /
    • 2019
  • We investigated an interrogation system for fiber Bragg gratings by using a 50-GHz 96-channel array waveguide grating. Linearity of the sensitivity (the wavelength shift in response to the change in strain or temperature) is achieved for a Bragg grating of sufficiently wide bandwidth. The present wavelength-monitoring system could measure the change in Bragg wavelength with a resolution of 0.01 nm, at intervals of 10 seconds. When this interrogation system was used for a linear array of 12 acrylaterecoated fiber gratings, the wavelength sensitivity changed from 0.018 nm/℃ to 0.01 nm/℃ when the operating temperature changed from -25℃ to 85℃.

A fiber optic surface plasmon resonance (SPR) sensorusing cyclic olefin copolymer (COC) polymer prism (Cyclic olefin copolymer (COC) 폴리머 프리즘을 사용한 광섬유 기반 표면 플라즈몬 공명 (SPR) 바이오 센서)

  • Yun, Sung-Sik;Lee, Soo-Hyun;Ahn, Chong-H.;Lee, Jong-Hyun
    • Journal of Sensor Science and Technology
    • /
    • v.17 no.5
    • /
    • pp.369-374
    • /
    • 2008
  • A novel fiber optic surface plasmon resonance (SPR) sensor using cyclic olefin copolymer (COC) prism with the spectral modulation is presented. The SPR sensor chip is fabricated using the SU-8 photolithography, Ni-electroplating and COC injection molding process. The sidewall of the COC prism is partially deposited with Au/Cr (45/2.nm thickness) by e-beam evaporator, and the thermal bonding process is conducted for micro fluidic channels and optical fibers alignment. The SPR spectrum for a phosphate buffered saline (0.1.M PBS, pH.7.2) solution shows a distinctive dip at 1300.nm wavelength, which shifts toward longer wavelength with respect to the bovine serum albumin (BSA)concentrations. The sensitivity of the wavelength shift is $1.16\;nm{\cdot}{\mu}g^{-1}{\cdot}{\mu}l^{-1}$. From the wavelength of SPR dips, the refractive indices (RI) of the BSA solutions can be theoretically calculated using Kretchmann configuration, and the change rate of the RI was found to be $2.3{\times}10^{-5}RI{\cdot}{\mu}g^{-1}{\cdot}l^{-1}$. The realized fiber optic SPR sensor with a COC prism has clearly shown the feasibility of a new disposable, low cost and miniaturized SPR biosensor for biochemical molecular analyses.

Radiation Effects on Fiber Bragg Grating Sensors by Irradiation Conditions of UV Laser (UV 레이저 노출조건에 따른 FBG 센서의 방사선 영향)

  • Kim, Jong-Yeol;Lee, Nam-Ho;Jung, Hyun-Kyu
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.20 no.12
    • /
    • pp.2310-2316
    • /
    • 2016
  • We studied the effect of $Co^{60}$ gamma-radiation on the fiber Bragg gratings (FBGs) by irradiation time of UV Krypton fluoride (KrF) excimer laser among grating processing parameters. The FBGs were fabricated in a different UV laser irradiation time at 30, 60, 90, and 120 seconds using the same commercial Ge-doped silica core fiber (SMF-28e). It was exposed to gamma-radiation up to a high dose of 34.3 kGy at the dose rate of 106 Gy/min, and then it was analyzed radiation effects by measuring the radiation-induced change in the temperature sensitivity coefficient and Bragg wavelength shift. According to the experimental results, We confirmed that the UV laser irradiation period for grating inscription has a highly effect on the radiation sensitivity of the FBGs. The radiation-induced Bragg wavelength shift by the change of laser irradiation conditions showed a difference more than about 50 %.