• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.4 s.107
• /
• pp.351-357
• /
• 2006

In this paper, a direct $TM_{01}-TE_{11}$ mode converter of circular waveguide which is used the approximated design method of mode conversion between $TM_{01}$ and $TE_{11}$ modes is designed for radiation with the maximum directivity of high power energy into air (rom high power microwave antenna system. The proposed direct $TM_{01}-TE_{11}$ mode converter is calculated and designed with an approximated method for non-linear function about an extended non-constant serpentine type of circular waveguide. Then, the designed mode converter is optimized by length of 200 mm and efficiency above 95% by FIM simulation and achieved short length and high efficiency of the antenna by results of fabricated and measured characteristics.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.3 no.1
• /
• pp.23-28
• /
• 1999

Rectangular waveguide slot antenna which has simple structure, high efficiency, high trust and small size, is extending in a field of application such as many Radar and Microwave communication. A slot cut into a wall of waveguide is propagated electromagnetic wave to free space it interrtupts the flow of current inner conductor of waveguide. Therefore incident of slot, cutdepth, width, length, i.e. are important parameter of characteristic change of the slot antenna. Result from difficulty of theoretical analysis about slot frequently experimental measured data useful design and manufacture have been accomplished. In this paper, we find the suitable method of analysis that compare two analysis results with measured result of established literature - admittance of slot be solved by propagated power from electric field distribution of slot and mode current computation and accomplishment of computable chart which hasresonant length and cutdepth, incident of slot, i.e. and use the HFSS which applyed finite-element method obtain equal slot analyed method.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.47 no.3
• /
• pp.50-56
• /
• 2010

In this paper, compact broad-band antenna using circular spiral slot and CPW (coplanar waveguide) feed is proposed. The proposed antenna is designed on the same plane of the substrate by using CPW fed structure, archimediean spiral slot structure. So it was achieved both the size of compact antenna and the broad band. A archimediean spiral slot structure is introduced for resonance of medium band operation. The distances of a CPW feeder line and a ground plane are modified for impedance matching and lower/higher band operation. The proposed antenna has a compact size ($8mm\;{\times}\;13mm$) and it is etched on the FR-4 (relative dielectric constant 4.4, thickness 0.8mm) dielectric substrate. The simulated impedance bandwidth (VSWR $\leq$ 2) and maximum gain of the proposed antenna are 5.98GHz (4.1GHz ~ 10.08GHz) and 3.97dBi, respectively. The measured impedance bandwidth (VSWR $\leq$ 2) and maximum gain of the proposed antenna are 6.02GHz (4.48GHz ~ 10.5GHz) and 2.68dBi, respectively. The simulation and measured result shows good impedance matching and radiation pattern over the interesting frequency bands. It can be applied to antenna of broad-band wireless communication system.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.27 no.5
• /
• pp.666-671
• /
• 1990

The characteristics of the corrugated conical horn antenna for the satellite communication earth station operating at C band is analyzed and its radiation patterns is measured. We obtain the characterstic equations for corrugated horn in the condition that the balanced hybrid mode is formed on born aperture and calculate radiation patterns in the Fresnel region from the aperture integral expressions obtained by the equivalence principle. The radiation patterns which are calculated for the frequency of 3.85GHz and 6.18GHz are well agreed with the measured data.

• Proceedings of the IEEK Conference
• /
• 1999.11a
• /
• pp.139-142
• /
• 1999

In this paper, a method of Radome design is considered. The shape is similar to tangent-ogive, and the antenna is a waveguide broad-wall slot array antenna. The characteristic of the Radome material is obtained by measuring test samples. By analyzing the transmission efficiency of the flat plate, Radome wall thickness is determined firstly. And then, the detailed characteristics of the Radome are analyzed by using GO-PO approximation technique. Several simple parameters of the designed Radome are tested and compared with the simulation results.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.30A no.1
• /
• pp.1-7
• /
• 1993

The radiation characteristics of a phased array antenna consisted of rectangular waveguides with a slant grid are investigated here. In particular, the effects of the slant angle on the radiation patterns are calculated by solving numerically the integral equation to the electric field over the waveguide aperture in view of the modal analysis. And it is found that the blindness on the radiation pattern can be moved by inserting a dielectric plug or sheath properly.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1438-1439
• /
• 2008

본 논문에서는 유방암치료에 적용되는 Microwave Hyperthermia를 이용한 국부 가열의 방법론적인 접근을 하였다. 그 결과 위상과 거리를 변수로 하여 정확성과 효율성을 2개의 높이는 알고리듬을 찾게 되었다. 그래서 실험적으로 증명하기 위하여 3개의 Waveguide antenna 및 안테나에 파워를 분배해주는 파워 디바이더를 제작하였다.

• Proceedings of the KIEE Conference
• /
• 1988.07a
• /
• pp.430-432
• /
• 1988

Radiation admittance of the rectangular microstrip antenna is calculated by using equivalent ${\pi}$-network parameters of the slit in the wall of the parallel plate waveguide filled with homogeneous dielectric. Using equivalent transmission line model, return loss is calculated and compared with experimental result. Calculated values for the return loss show good agreement with experimental values.

• Transactions on Electrical and Electronic Materials
• /
• v.18 no.2
• /
• pp.119-123
• /
• 2017

This paper presents a unique and miniaturized dual-band coplanar waveguide (CPW-fed) antenna for modern wireless communication. A new technique of using a modified ground structure (MGS) and frequency shifting strips (FSS) has been employed in the design to achieve dual-frequency operation. The proposed antenna generates two separate impedance bandwidths and covers the minimum required frequency bands of GSM 1800, GSM 1900, and Wi-Fi/WLAN 5 GHz. The proposed antenna is relatively small ($17{\times}20mm^2$) and operates over frequency ranges 1.51~2.06 and 4.43~6.70 GHz. The designed antenna was simulated using Ansoft HFSS, a FEM based simulator, and antenna characteristics, such as reflection coefficient, gain, radiation efficiency, radiation pattern, impedance bandwidth, VSWR, surface current, and electric field distributions, are reported in this paper. The effect of the antenna's key structural parameters on its performance is also analyzed.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.67 no.11
• /
• pp.1471-1476
• /
• 2018

In this paper, a high-gain antenna for satellite communication is proposed. The proposed antenna consists of septum polarizer, circular waveguide, Hat-feed structure that has a high-gain and efficiency. Especially, it is smaller and lighter than the conventional satellite communication antennas by applying a hat-feed structure. The measured results show that received gain of proposed antenna is better than 29.9 dBi and transmitted gain of proposed antenna is better than 30.5 dBi. The co-polarized and cross-polarized radiation patterns comply with ITU-RR Ap.8 and ITU-R S.731-1 that are recommended by International Telecommunication Union. The designed high-gain antenna for satellite communication is expected to be used for OTM and airborne satellite systems.