• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2006년도 춘계 학술발표회 논문집
• /
• pp.137-146
• /
• 2006

Shear wave velocity of uncemented soil can be expressed as the function of effective stresses when capillary phenomenons are negligible. However, the terms of effective stresses are divided to the direction of wave propagation and polarization because stress states are generally anisotropy. The shear wave velocities are affected by parameters and exponents that are experimentally determined. The exponents are controlled contact effects of particulate materials(sizes, shapes, and structures of particles) and the parameters are changed contact behaviors between particles, material properties of particles, and type of packing(i.e., void ratio and coordination number). In this study, consolidation tests are performed by using clay, mica and sand specimens. Shear wave velocities are measured during consolidation tests to investigate the stress-induced and inherent anisotropies through bender elements. Results show the shear wave velocities depends on the stress-induced anisotropy for round particles. Furthermore the shear wave velocity is dependent on particle alignment under the constant effective stress. This study suggests that the shear wave velocity and the shear modulus should be carefully calculated and used for the design and construction of geotechnical structures.

• 한국해양학회지
• /
• 제15권1호
• /
• pp.1-7
• /
• 1980

The results of measurements of shear current induced in water by wind in wind wave tunnel are presented briefly. The shear current distributions are found to fit reasonably well an exponentiall form. This form was used to estimate surface velocity and boundary layer thickness used in stability analysis. An analysis of hydrodynamic stability of the shear current was carried out, using a broken line as an approximate profile, to see the stability as a possible mechanism of wind wave generation. Comparison between experimental results and theoretical ones shows that there exists a large discrepancy particularly in phase velocity and hydrodynamic instability of the shear current seems not to be the basic mechanism of wind wave generation.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1998년도 춘계학술발표회논문집(1)
• /
• pp.553-558
• /
• 1998

The calibrating method for an electrochemical Probe, neglecting the effect of the normal velocity on the mass transport, can cause large errors when applied to the measurement of wall shear rates in thin wavy flow with large amplitude waves. An extended calibrating method is developed to consider the contributions of the normal velocity. The inclusion of the turbulence-induced normal velocity term is found to have a negligible effect on the mass transfer coefficient. The contribution wave-induced normal velocity can be classified on the dimensionless parameter V. If V above a critical value of V, $V_{crit}$, the effects of the wave-induced normal velocity become larger with an increase in V. IF V its effects negligible for V < $V_{crit}$. The unknown shear rate is numerically determined by solving the 2-D mass transport equation inversely. The president inverse method can predict the unknown shear rate more accurately in thin wavy flow with large amplitude waves than the previous method.

• 한국해양공학회지
• /
• 제12권3호통권29호
• /
• pp.75-85
• /
• 1998

A finite difference model for predicting time-dependent, wave-induced nearshore current is studied. The model includes wave refraction, wave-current interaction, bottom friction and wind effect. This model iteratively solved the linear the linear set of conservation of both mass and momentum, which were time averaged (over one wave period) and depth integrated, for mean velocities and free surface displacement. Numerical simulations of nearshore current under oblique wave attack, and for wave and wind induced current on a longshore periodic beach are carried out. Longshore velocities tend to zero in some distances outside the breaker line. And the peak velocity is shifted shoreward at the breaker line. The results represent the general characteristics of the nearshore current induced by wave.

• 한국지반공학회논문집
• /
• 제22권11호
• /
• pp.47-54
• /
• 2006

비고결화된 흙의 전단파 속도는 모세관 현상을 무시할 수 있는 경우 유효응력의 함수로 표현할 수 있다. 그러나 지반에서의 응력상태는 등방성인 경우보다는 이방성인 경우가 대부분이므로 이러한 유효응력은 파가 전파되는 방향과 입자가 움직이는 방향의 두 가지로 나눠진다. 또한, 전단파 속도는 입자 특성에 따라 실험적으로 결정되는 ${\alpha}$계수와 ${\beta}$지수에 영향을 받는데 ${\beta}$지수의 경우 입상 매질(particulate material)의 접촉 특성(입자크기, 입자모양, 입자들의 구조)에 따라 결정되며, ${\alpha}$계수는 패킹(packing)의 형태(즉, 간극률과 coordination number), 입자를 만드는 재료의 특성, 입자간의 접촉 거동, 구조의 변화에 따라서 변화한다. 본 연구에서는 입자구조의 특성이 다른 점토, 모래, mica등의 재료로 압밀시험을 실시하고 벤더 엘리먼트를 통하여 유효응력 방향과 입자 이방성에 따른 전단파 속도를 측정하였다. 연구 결과, 둥근 입자로써 입자자체가 등방성인 경우에는 응력이방성에 의하여 전단파 속도의 크기가 달라지는 것으로 나타났다. 또한 전단파 속도는 동일한 응력 하에서 입자 배열에 의존하는 것으로 나타났다. 이번 연구는 지반구조물의 설계와 시공 시 전단파 속도와 전단탄성계수는 매우 신중하게 계산되고 사용되어져야 함을 제시하고 있다.

• 한국해양공학회지
• /
• 제21권1호
• /
• pp.31-39
• /
• 2007

Recently, the nonlinear dynamic responses among waves, submarine pipeline and seabed have become a target of analyses for marine geotechnical and coastal engineers. Specifically, the velocity field around the submarine pipeline and the wave-induced responses of soil, such as stress and strain inside seabed, have been recognized as dominant factors in discussing the stability of submarine pipeline. The aim of this paper is to investigate nonlinear dynamic responses of soil in seabed, around submarine pipeline, under wave loading. In order to examine wave-induced soil responses, first, the calculation is conducted in the whole domain, including wave field and the seabed, using the VOF-FDM method. Then, velocities and pressures, which are obtained on the boundary between the wave field and the seabed, are used as the boundary condition to compute the wave-induced stress and strain inside seabed, using the poro-elastic FEM model, which is based on the approximation of the Biot's equations. Based on the numerical results, the characteristics of wave-induced soil responses around submarine pipeline are investigated, in detail, inrelation to relative separate distance of the submarine pipeline from seabed. Also, the velocity field around the submarine pipeline is discussed.

• Geomechanics and Engineering
• /
• 제11권5호
• /
• pp.713-723
• /
• 2016

Shear wave velocities of three selected sandy soils subject to drained triaxial compression test were continuously measured using the bender elements. The shear wave velocity during isotropic compression, as widely recognized, increased as confining pressure increased and they were correlated well. However, during drained shearing, the mean effective stress could no further provide a suitable correlation. The shear wave velocity during this stage was almost constant with respect to the mean effective stress. The vertical stress was found to be more favorable at this stage (since confining stress was kept constant). When sample was attained its peak stress, the shear wave velocity reduced and deviated from the previously existed trend line. This was probably caused by the non-uniformity induced by the formation of shear band. Subsequently, void ratios computed based on external measurements could not provide reasonable fitting to the initial stage of post-peak shear wave velocity. At very large strain levels after shear band formation, the digital images revealed that sample may internally re-arrange itself to be in a more uniform loose stage. This final stage void ratio estimated based on the proposed correlation derived during pre-peak state was close to the value of the maximum void ratio.

• 한국초전도저온공학회:학술대회논문집
• /
• 한국초전도저온공학회 2002년도 학술대회 논문집
• /
• pp.23-26
• /
• 2002

Two modes of shock waves propagating in He II (superfluid helium), this is a compression and a thermal shock waves, were studied experimentally by using superconductive temperature sensors, piezo pressure transducers and Schlieren visualization method with an ultra-high-speed video camera (40,500 pictures/sec). The shock waves are induced by a gas dynamic shock wave impingement upon a He II free surface. It is found that the shock Mach number of a transmitted compression shock wave is up to 1.16, and the shock Mach number of a thermal shock wave coincides well with the second sound velocity under each compressed He II state condition. The temperature rise ratio of an induced thermal shock wave to that of an incident gas dynamic shock wave was found to be very small, as small as 0.003 at 1.80K.

• 대한기계학회논문집B
• /
• 제20권12호
• /
• pp.3960-3969
• /
• 1996

A fluid flow inside a circular cylinder subject to horizontal and circular oscillation is analyzed theoretically. Under the assumption of small-amplitude oscillation, the governing equations take linear forms. The velocity field is obtained in terms of the first kind of Bessel function of order 1. It was found that a particle describes an orbit close to a circle in the central region and an arc near the side wall. We also obtained the Stokes' drift velocity induced by the traveling wave along the circumferential direction. The Eulerian streaming velocities at the edge of the bottom and side boundary layers were also obtained. It was shown that the vertical component of the steady streaming velocity on the side wall is almost proportional to the amplitude of the free surface motion.

• 한국터널지하공간학회 논문집
• /
• 제6권1호
• /
• pp.25-40
• /
• 2004

밀장전한 암반발파공에서 화약폭발로 전파되는 초음속 충격파는 암반중에 전파되면서 차자로 저음속 충격파, 소성파, 탄성파로 변화된다. 이 연구는 발파압력파의 최대압력 도달시간 산정에 중점을 두었고 연계된 논문 I (the companion paper)에서는 최대 발파업력 산정에 중점을 두었다. 이 연구에서 최대압력 도달시간을 화약밀도, 단열지수, 폭광파속도, 감쇠지수, 동적항복강도, 소성파속도, 암반밀도, 탄성파속도, Hugoniot 상수의 함수식으로 유도하였다 최대합력 도달시간에 대한 매개변수분석 결과 암반특성치가 화약특성치보다 더 크게 영향을 미쳤다. 최대압력 도달시간의 확률분포는 화약과 암반 특성치의 확률분포로부터 Rosenblueth 확률모델로 조합하여 산출되었다. 화약과 암반특성의 불확정성이 발파진동의 불확정성에 미치는 영향을 수치해석으로 분석하였다. 불확정성 분석결괴 화약특성보다 암반특성의 불확정성이 발파진동에 더 크게 영향을 미쳤다. 수치해석 분석결괴 최대 발파양력과 최대양력 도달시간의 바인 하중재하율이 발파진동에 큰 영향을 미쳤다. 또한 화약특성보다 암반특성이 하중재하율에 더 크게 영향을 미쳤다.