• Title/Summary/Keyword: wave-by-wave method

Search Result 4,931, Processing Time 0.037 seconds

Method for Scale Effect on Front of Flood Wave Occurred by Levee Breach (제방붕괴로 인한 홍수파 선단의 축척효과 보정 방안)

  • Jeong, Seokil;Kim, Sooyoung;Lee, Seung Oh
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2016.05a
    • /
    • pp.461-461
    • /
    • 2016
  • 이상기후로 인하여 제방붕괴에 대한 위험성이 높아지고 있고, 이로 인해 발생하는 제내지 내 붕괴 홍수파에 대한 연구가 증가하고 있다. 특히 홍수파 선단의 이동 속도 추정은 제내지의 위험성을 예측하고, EAP 등을 수립하는데 매우 중요한 자료가 될 수 있다. 제내지에서의 선단 홍수파에 대한 예측을 하기 위해서는 해당 지역의 하천특성, 수리특성 및 제방 등 수공구조물 특성뿐만 아니라, 제내지의 지형 및 토지이용 현황 등을 조사하여 수리실험이나 수치모의를 수행해야 하는 것이 일반적이다. 수치해석의 경우 수리실험에 비하여 경제성 및 효율성 측면에서 뛰어날 수 있으나, 제방 붕괴과정 및 메커니즘을 반영하기가 불가능하다. 이에 반해 수리모형실험의 경우 제방붕괴 양상 및 그 과정의 재현이 가능하기 때문에, 제내지에서의 선단홍수파 전파에 관한 보다 정확한 양상을 파악할 수 있을 것이다. 그러나 이러한 실험은 실제 크기의 하천이 아닌 축소모형 또는 개수로에서 수행되었기 때문에, 초기 홍수파의 전파가 축척효과(Scale effect)의 영향을 받을 가능성이 매우 크다. 특히 선단 홍수파의 경우 파가 진행되면서 수심이 낮아지고, 유속이 느려지기 때문에 그 영향은 점차 증대된다고 할 수 있다. 이에 본 연구에서는 이러한 초기 선단 홍수파의 표면장력 영향을 고려한 보정 계수 산정에 대한 연구를 수리실험을 통해 수행하였다. 연구는 크게 4가지 과정으로 구성되었다. 첫째는 농도-표면장력의 관계 규명이며, 둘째는 표면장력-홍수파 전파 속도 관계 규명이다. 셋째는 표면장력과 Weber Number(We)의 관계를 도출하는 것이며, 마지막은 We를 이용하여 한계조건을 제시하는 것이다. 실험은 계면활성제의 농도를 변화시켜가며, 얇은 유리관(D=1.0 mm)에서 물의 상승 높이 및 접촉각을 측정하여 농도와 표면장력의 관계를 측정하였으며, 이러한 결과를 바탕으로 물의 표면장력을 변화시켜 가며 $0.5(B){\times}0.3(L){\times}0.2(H)m$의 Head-tank에 설치된 수문을 빠르게 개방하여, 홍수파가 퍼지는 양상을 관측하였다. 홍수파의 이동 속도는 진행시간에 따라서 퍼짐 넓이를 측정하여 제곱근을 취하는 방식으로 평균속도를 산정하였다. 이러한 관계를 이용하여 표면장력이 없을 경우의 이동속도 및 ??를 도출하였다. 본 연구를 통해 홍수파 전파 특성에 대한 수리실험 자료를 바탕으로 Weber 수를 도출하여 표면장력의 영향을 받는지 여부를 판단할 수 있으며, 표면장력의 영향을 받을 경우, 제시된 결과를 이용하여 홍수파 선단의 속도를 보정할 수 있다. 본 연구 결과는 토대로 축소모형으로 수행되는 홍수파 전파에 대한 수리실험결과의 보정 기초자료로 매우 유용할 것으로 판단된다.

  • PDF

Design Methodology on Steel-type Breakwater II. Pile Design Procedure (철재형 이안제 설계기법 연구 II. 하부기초 설계 단계)

  • Kwon, Oh-Kyun;Oh, Se-Boong;Kweon, Hyuck-Min
    • Journal of the Korean Society of Hazard Mitigation
    • /
    • v.11 no.3
    • /
    • pp.219-228
    • /
    • 2011
  • In this paper, the design procedure of substructure of the steel-type breakwater was described and the actual foundation design was performed for the test bed. The site investigation was executed at the Osan-port area, in Uljin, Gyeongbuk, where the steeltype detached breakwater is constructed. The foundation mainly depends on the lateral load and uplift force due to the wave force. Since the superstructure is stuck out about 9.0m from the ocean bed, the foundation must resist on the lateral force and bending moment. After considering various factors, the foundation type of this structure was determined by the steel pipe pile(${\varphi}711{\times}t12mm$). On the stability of pile foundation, the safety factors of the pile on the compressive, lateral and uplift forces were grater than the minimum factor of safety. The displacements of pile under the working load were evaluated as the values below the permissible ones. Based on the subgrade reaction method, we evaluated the relationship of subgrade reaction and displacement for the lateral and the vertical directions in the layers. The structural analyses along with the foundation were perfomed and the effect of pile foundations were compared quantitatively.

Buddha Bowl Meditation A Study on the Effect of Self-esteem Improvement Programs -Focused on middle-aged women Buddhists- (붓다볼(싱잉볼) 명상을 활용한 자아존중감 향상 프로그램 효과 연구 -중년 여성 불자 중심으로-)

  • Kim, Kyung Sook
    • The Journal of the Korea Contents Association
    • /
    • v.21 no.12
    • /
    • pp.676-687
    • /
    • 2021
  • The main purpose of this study is to study the effect of a program to improve self-esteem and positive thinking in middle-aged women using Buddha Ball meditation. In order to achieve this research purpose, the subject of this study was middle-aged female Buddhists at Temple H in Busan who were interested in 'Buddha Ball'. For the analysis method, empirical analysis was performed using the One Group Pretest-Posttest Design of this study. The main research results are as follows. First, as a result of examining the effect of Buddha Ball meditation on the quality of life, it could be seen that the overall quality of life had a significant positive (+) effect on the experimental group. Second, as a result of examining the effect of Buddha Ball meditation on self-esteem, it could be seen that self-esteem had a significant positive (+) effect on the experimental group. Third, as a result of examining the effect of Buddha Ball meditation on positive thinking, it could be seen that the entire positive thinking had a significant positive (+) effect on the experimental group. Based on these research results, the main conclusion was that the Buddha Ball, a healing meditation tool using the sound wave energy, had a positive effect on the self-esteem and quality of life of middle-aged women Buddhists. Accordingly, it is judged that the Buddha Ball meditation program has a positive use value for middle-aged women who are experiencing more complex psychological difficulties due to individual, family, and social environmental conditions. In addition, by preparing a system that can actively utilize the Buddha Ball meditation program educationally and politically, the implications of the justification and necessity of using it to improve the self-esteem, positive thinking and quality of life of middle-aged women were presented.

Synthetic Training Data Generation for Fault Detection Based on Deep Learning (딥러닝 기반 탄성파 단층 해석을 위한 합성 학습 자료 생성)

  • Choi, Woochang;Pyun, Sukjoon
    • Geophysics and Geophysical Exploration
    • /
    • v.24 no.3
    • /
    • pp.89-97
    • /
    • 2021
  • Fault detection in seismic data is well suited to the application of machine learning algorithms. Accordingly, various machine learning techniques are being developed. In recent studies, machine learning models, which utilize synthetic data, are the particular focus when training with deep learning. The use of synthetic training data has many advantages; Securing massive data for training becomes easy and generating exact fault labels is possible with the help of synthetic training data. To interpret real data with the model trained by synthetic data, the synthetic data used for training should be geologically realistic. In this study, we introduce a method to generate realistic synthetic seismic data. Initially, reflectivity models are generated to include realistic fault structures, and then, a one-way wave equation is applied to efficiently generate seismic stack sections. Next, a migration algorithm is used to remove diffraction artifacts and random noise is added to mimic actual field data. A convolutional neural network model based on the U-Net structure is used to verify the generated synthetic data set. From the results of the experiment, we confirm that realistic synthetic data effectively creates a deep learning model that can be applied to field data.

Inspection Method Validation of Grouting Effect on an Agricultural Reservoir Dam (농업용 저수지 제체에서의 그라우팅 주입효과 확인방법의 검증)

  • Kim, Hyeong-Sin;Moon, Seong-Woo;Leem, Kookmook;Seo, Yong-Seok
    • The Journal of Engineering Geology
    • /
    • v.31 no.3
    • /
    • pp.381-393
    • /
    • 2021
  • Physical, mechanical, hydraulic, and geophysical tests were applied to validate methods of inspecting the effectiveness of grouting on an agricultural reservoir dam. Data obtained from series of in situ and laboratory tests considered four stages: before grouting; during grouting; immediately after grouting; and after aging the grouting for 28 days. The results of SPT and triaxial tests, including the unit weight, compressive strength, friction angle, cohesion, and N-value, indicated the extent of ground improvement with respect to grout injection. However, they sometimes contained errors caused by ground heterogeneity. Hydraulic conductivity obtained from in situ variable head permeability testing is most suitable for identifying the effectiveness of grouting because the impermeability of the ground increased immediately after grouting. Electric resistivity surveying is useful for finding a saturated zone and a seepage pathway, and multichannel analysis of surface waves (MASW) is suitable for analyzing the effectiveness of grouting, as elastic velocity increases distinctly after grouting injection. MASW also allows calculation from the P- and S- wave velocities of dynamic properties (e.g., dynamic elastic modulus and dynamic Poisson's ratio), which can be used in the seismic design of dam structures.

Reliability of OperaVOXTM against Multi-Dimensional Voice Program to Assess Voice Quality before and after Laryngeal Microsurgery in Patient with Vocal Polyp (성대 용종 환자의 후두미세수술 전후 음성 평가에서 OperaVOXTM와 Multi-Dimensional Voice Program 간의 신뢰도 연구)

  • Kim, Sun Woo;Kim, So Yean;Cho, Jae Kyung;Jin, Sung Min;Lee, Sang Hyuk
    • Journal of the Korean Society of Laryngology, Phoniatrics and Logopedics
    • /
    • v.31 no.2
    • /
    • pp.71-77
    • /
    • 2020
  • Background and Objectives OperaVOXTM (Oxford Wave Research Ltd.) is a portable voice analysis software package designed for use with iOS devices. As a relatively cheap, portable and easily accessible form of acoustic analysis, OperaVOXTM may be more clinically useful than laboratory-based software in many situations. The aim of this study was to evaluate the agreement between OperaVOXTM and Multi-Dimensional Voice Program (MDVP; Computerized Speech Lab) to assess voice quality before and after laryngeal microsurgery in patient with vocal polyp. Materials and Method Twenty patients who had undergone laryngeal microsurgery for vocal polyp were enrolled in this study. Preoperative and postoperative voices were assessed by acoustic analysis using MDVP and OperaVOXTM. A five-seconds recording of vowel /a/ was used to measure fundamental frequency (F0), jitter, shimmer and noise-to-harmonic ratio (NHR). Results Several acoustic parameters of MDVP and OperaVOXTM related to short-term variability showed significant improvement. While pre-operative value of F0, jitter, shimmer, NHR was 155.75 Hz (male: 125.37 Hz, female: 183.37 Hz), 2.20%, 6.28%, 0.16, post-operative values of these parameter was 164.34 Hz (male: 129.42 Hz, female: 199.26 Hz), 2.15%, 5.18%, 0.14 Hz in MDVP. While pre-operative value of F0, jitter, shimmer, NHR was 168.26 Hz (male: 135.16 Hz, female: 201.37 Hz), 2.27%, 6.95%, 0.26, post-operative values of these parameters was 162.72 Hz (male: 128.267 Hz, female: 197.18 Hz), 1.71%, 5.36%, 0.20 in OperaVOXTM. There was high intersoftware agreement for F0, jitter, shimmer with intraclass correlation coefficient. Conclusion Our results showed that the short-term variability of acoustic parameters in both MDVP and OperaVOXTM were useful for the objective assessment of voice quality in patients who received laryngeal microsurgery. OperaVOXTM is comparable to MDVP and has high intersoftware reliability with MDVP in measuring the F0, jitter, and shimmer

Experimental and Numerical Study of Berthing and Unberthing of LNG-Bunkering Vessels (실험 및 수치해석을 통한 LNG 벙커링 선박들의 이접안 안정성 평가 연구)

  • Jung, Sung-Jun;Oh, Seung-Hoon;Jung, Dong-Woo;Kim, Yun-Ho;Jung, Dong-Ho
    • Journal of Navigation and Port Research
    • /
    • v.44 no.6
    • /
    • pp.439-446
    • /
    • 2020
  • The IMO has adopted emission standards through Annex VI of the International Convention for the Prevention of Pollution from Ships (MARPOL) that strictly prohibit the use of bunker C oil for vessels. In this study, we have adopted the turret-moored Floating LNG-Bunkering Terminal (FLBT) which is designed to receive the LNG from LNGCs and transfer it to LNG-bunkering shuttles in side-by-side moored condition. Numerical analyses were carried out using the high-order boundary-element method for four vessels at various relative distances. Mean wave drift forces were compared in an operational sea state. A model test was performed in the ocean engineering basin at the Korea Research Institute of Ships & Ocean Engineering (KRISO) to verify the safety of the berthing/unberthing operation. In the model test, a jig was designed to simulate tug boats pushing or pulling the bunkering vessels, so that the friction force of the g operation was not affected. Safety depended on the environmental direction, with more stable operation possible if the heading-control function of FLBT is applied to avoid beam-sea conditions.

The Moderating Effect of Self-rated Health on the Association between Grandparenting and Depressive Symptoms among Grandparents (손자녀 양육이 조부모의 우울감에 미치는 영향에 대한 주관적 건강상태의 조절효과)

  • Song, Si Young;Jun, Hey Jung;Joo, Susanna
    • 한국노년학
    • /
    • v.40 no.3
    • /
    • pp.459-475
    • /
    • 2020
  • This study examined the moderating effect self-rated health has on the association between grandparenting and depressive symptoms. The fourth wave (in 2012) of the Korean Longitudinal Study of Ageing (KLoSA) was used for the analyses (N=650). The Coarsened Exact Matching (CEM) method was applied in order to ensure randomness in the selection of grandparents who participated in grandparenting and those who did not. The dependent variable was depressive symptoms, the independent variable was grandparenting, and the moderating variable was self-rated health. Control variables were education level, age, household income, gender, marital status and life satisfaction. After matching data by CEM, weighted multiple regression was applied with STATA 13.0. Also, simple slope analysis and region of significance were performed to interpret the interaction terms. The results showed that self-rated health had a significant moderating effect. Specifically, for grandparents with high self-rated health, grandparenting was associated with a lower level of depressive symptoms. On the contrary, for grandparents with low self-rated health, there was no difference depending on whether they participated in raising grandchildren. Based on these results, we discussed the need for consideration of self-rated health for grandparents who participated in grandparenting.

A Study on the Metaverse as an Arts Educational Medium - Focusing on ifland of the SKT Metaverse Platform (예술교육 매체로서 메타버스 사례 연구 - SK텔레콤 ifland를 중심으로)

  • KIM, JOY
    • The Journal of the Convergence on Culture Technology
    • /
    • v.7 no.4
    • /
    • pp.391-396
    • /
    • 2021
  • The purpose of this study is to study the possibilities and limitations of arts education by utilizing SKT's ifland metaverse Platform for arts majors. To summarize the performance of the study, it is as follows. The subjects of the study were 50 students(25 experimental group, 25 control group) in Performing Arts, Entertainment and Music department of D University located at Gyeonggi, Korea. As a result of analyzing the difference between the pre-test and the post-test between the experimental group and the control group, it was found that there was a statistically significant effect on the effectiveness of the arts education method using the metaverse of the control group. It is hoped that the results of this study will be a case study that cannot be overlooked in the development of the today's arts educational medium as well as the virtual world in the field of arts and in cultural technology research, arts education is no longer a latecomer, but a leading pioneer and main agent, and I hope that it will become a new perspective for various studies connected with industry like the WAVE.

Study of Structural Stability and Seismic Performances of 4-Way Sway Prevention Brace (4방향흔들림방지버팀대의 구조 안정성 및 내진 성능 연구)

  • O, Soo Un;Lee, Hang Jun;Choa, Sung Hoon
    • Journal of the Society of Disaster Information
    • /
    • v.18 no.3
    • /
    • pp.646-659
    • /
    • 2022
  • Purpose: In this study, we developed a 4-way sway prevention brace that efficiently reduces the installation area and has excellent stability and seismic performance compared to the conventionl sway prevention brace used in existing firefighting facilities. The performance and reliability of the developed 4-way way prevention brace were analyzed by the tensile, compression tests and seismic tests. Method: As the static test, 4-way sway prevention braces were installed on the horizontal and vertical pipes to perform the tensile and compression tests based on the KFI certification standard and the maximum movement was measured at the rated load. As a dynamic test, 4-way sway prevention braces were installed in the pipes filled with water, and the test response spectrum to the input excitation wave were measured through the acceleration sensors. After the seismic tests, separation, failure, and local deformation of the pipes, and 4-way sway prevention braces were not observed. Result: The results of the tensile and compression tests indicated that the maximum movement of the pipe during tension and compression was 50% to 70% or less compared to the certification values, indicating that the performances of the 4-way sway prevention braces were very excellent. The results of the the seismic tests indicated that the test response spectrum of the 4-way sway prevention braces is within the required response spectrum. Conclusion: In this study, it was found that the 4-way sway prevention braces satisfied the KFI certification standard and were superior compared to the existing sway prevention brace in terms of the stability, cost, and installation area.