• Journal of Ship and Ocean Technology
• /
• 제10권4호
• /
• pp.34-48
• /
• 2006

The visual observation of wave condition depends on the observer's skill and experience. Also, the environmental conditions such as light and cloud heavily influence the visual measurement. In the speed test of sea trial, the wave measurement should be objective and accurate. In this paper, the problems of visual measurement and their effects on speed test are described. To overcome those problems, we developed the wave measurement system using commercial marine X-band radar, WaveFinder. The system installed at inland base was calibrated by waverider buoy and then the system's operability was defined. Onboard tests had also been performed three times for formal wave measurement to correct the ship speed. The results illustrated very good agreement with visual observation by experts. It can be concluded that the system would be useful to measure wave and swell information for the sea trial, irrespective of day and night.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집E
• /
• pp.373-379
• /
• 2001

When a train runs into a tunnel at high-speed, aerodynamic drag suddenly increases and the booming noise is generated at the exit of tunnel. The noise shape is very important to reduce the aerodynamic drag in tunnel as well as on open ground, and the micro-pressure wave that is a source of booming noise is dependent on nose shape, especially on area distribution. In this study, the nose shape has been optimized employing the response surface methodology and the axi-symmetric compressible Navier-Stokes equations. The optimal designs have been executed imposing various conditions of the aerodynamic drag and the micro-pressure wave on object functions. The results show that the multi-objective design was successful to decrease micro-pressure wave and aerodynamic drag of trains.

• 한국항해학회지
• /
• 제19권3호
• /
• pp.1-10
• /
• 1995

The effect of the submerged high speed vessel on the ocean wave is made clear in the point of hydrodynamics view. In connection to the design of high speed ship, the flow analysis is carried out to predict the pressure distribution for drag and lift. The purpose of the research is to help the preliminary design of the economic hull form advancing under the ocean wave by estimating the resistance performance and the wave behaviour. In the present study, more efficient numerical approaches are investigated for the viscous flow analysis around a submerged NACA0012 hydrofoil with the laminar and incompressible fluid. Through the numerical simulation, it is found that the new numerical method becomes more efficient primarily due to the fact that the wave elevation is reasonably developed.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.1023-1028
• /
• 2004

A micro-pressure wave is generated by the high-speed train which enters a tunnel, and it causes explosive noise and vibration at the exit. It is known that train speed, train-tunnel area ratio, nose slenderness and nose shape mainly influence on generating micro-pressure wave. So it is required to minimize it by searching optimal values of such train shape factors and tunnel condition. In this study, response surface model, one of approximation models, is used to perform optimization effectively and analyze sensitivity of design variables. Owen's randomized orthogonal array and D-optimal Design are used to construct response surface model. In order to increase accuracy of model, stepwise regression is selected. Finally SQP(Sequential Quadratic Programming) optimization algorithm is used to minimize the maximum micro-pressure wave by using built approximation model.

• 한국터널지하공간학회 논문집
• /
• 제2권2호
• /
• pp.3-10
• /
• 2000

고속열차가 터널에 진입할 때 압축파가 터널 내부로 전파된다. 이 압축파와 연관된 터널출구 미기압파는 고속철도 열차-터널 인터페이스에서 발생되는 독특한 물리현상이다. 미기압파를 저감시키는 방법중에 터널 입 출구부에 공기역학적인 구조물을 사용하여 압축파의 시간에 대한 구배를 지연시키는 방법이 있다. 본 연구의 목적은 터널주행 열차모형 시험기로 최적의 경사갱구를 개발하는 것이다. 경사갱구의 경사각도에 따른 시험을 통한 시험결과에서 터널 입구부에 $45^{\circ}$ 경사갱구를 적용했을 때 미기압파 최대 피크값이 19.2 %가 저감되었다. 터널 입 출입구 양쪽에 $45^{\circ}$ 경사갱구를 적용할 경우는 41.2% 저감되었다. 또한 터널 입 출입구 양쪽에 $30^{\circ}$ 경사갱구를 적용할 경우는 미기압파 최대 피크값이 34.6% 저감되었다.

• 대한전자공학회논문지
• /
• 제26권11호
• /
• pp.1819-1828
• /
• 1989

In this paper, we determined the modulation index for minimization of speed ripple and position error using maximum speed ripple (SRF) and maximum position error(PEF) in current source TPWM inverter. Through computer simulation, we compared with total current harmonic distortion, SRF and PEF for square wave modulation method and TPWM method. As a result, it turns out that square wave modulation method is superior to TPWM method of 3 pulses per half cycle in speed ripple and position error contents. And TPWM is better than square wave method when pulse number is more than 5. Also, in these pulse numbers, moduladtion index of minimum speed ripple and munimum position error is 0.91.

• ETRI Journal
• /
• 제35권4호
• /
• pp.578-586
• /
• 2013

Using a sub-terahertz (sub-THz) wave generated using a photonics-based technology, a high-speed wireless link operating at up to 10 Gbps is designed and demonstrated for realization of seamless connectivity between wireless and wired networks. The sub-THz region is focused upon because of the possibility to obtain sufficient bandwidth without interference with the allocated RF bands. To verify the high-speed wireless link, such dynamic characteristics as the eye diagrams and bit error rate (BER) are measured at up to 10 Gbps for non-return-to-zero pseudorandom binary sequence $2^{31}-1$ data. From the measurement results, a receiver sensitivity of -23.5 dBm at $BER=10^{-12}$ is observed without any error corrections when the link distance between the transmitter and receiver is 3 m. Consequently, we hope that our design and experiment results will be helpful in implementing a high-speed wireless link using a sub-THz wave.

• 소음진동
• /
• 제7권6호
• /
• pp.959-966
• /
• 1997

In general, the booming noise intensity at tunnel exit is strongly related to the gradient of the compression wave front created by high speed train entering the tunnel. This paper presents some results in relation with the compression wave front produced when the high speed train enters a tunnel. Four kinds of tunnel entrance shape with real dimensions were studied to investigate the formation of compression wave front inside tunnel by train entering tunnel. Computations were carried out using three-dimensional compressible Euler equation with vanishing viscosity and conductivity of fluid. According to the results, the flow disturbances occured at tunnel entrance were eliminated by tunnel hood with same cross sectional area. The compression wave front is formed completely at 30-40m from tunnel entrance. The maximum pressure gradient of compression wave front is reduced by 29.8% for the inclined tunnel hood and reduced by 21.5% for the tunnel hood with holes at the top face with tunnel without hood. The length of the inclined hood is 15m and the length of the hood with holes is 20m.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1997년도 춘계학술대회논문집; 경주코오롱호텔; 22-23 May 1997
• /
• pp.627-635
• /
• 1997

In general, the booming noise intensity at tunnel exit is strongly related to the gradient of the compression wave front created by high speed train entering the tunnel. This paper presents some results in relation with the compression wave front produced when the high speed train enters a tunnel. Four kinds of tunnel entrance shape with real dimensions were studied to investigate the formation of compression wave front inside tunnel by train entering tunnel. Computations were carried out using three-dimensional compressible Euler equation with vanishing viscosity and conductivity of fluid. According to the reslts, the flow disturbance occured at tunnel entrance were eliminated by tunnel hood with same cross sectional area. The compression wave front is formed completely at 30-40m from tunnel entrance. The maximum pressure gradient of compression wave front is reduced by 29.8% for the inclined tunnel hood and reduced by 21.5% for the tunnel hood with holes at the top face with tunnel without hood. The length of the inclined hood is 15m and the length of the hood with holes is 20m.

• 디지털산업정보학회논문지
• /
• 제9권1호
• /
• pp.103-110
• /
• 2013

WAVE system is a vehicle communication technology. The system provides the services to prevent vehicle accidents that might occur during driving. Also, it is used to provide various services such as monitoring vehicle management and system failure. In this paper, we divide module that manages WAVE MAC state into a WSMP base MLME module and IP base module and we design and implement a parameter environment between WME module to manage the state of the WAVE system and MLMEX module to mange IP base of WAVE MAC therefore the date to be processed.Also, in order to verify the validity, we have carried out experiments to compare the speed of data processing by dividing data of 5Mbyte, 10Mbyte, 20Mbyte into the packets of 2KByte and 4KByte. Therefore, in WAVE system, the Parameter environments and data processing speed between WME and MLMEX module can be utilized in the various service of vehicle communication technology depending on the speed of data processing.