• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1988년도 전기.전자공학 학술대회 논문집
• /
• pp.799-801
• /
• 1988

This paper was studied on the effects of Ca-La-Nb substitution and Zr/Ti ratio variation to Pb(Zr, Ti)$O_3$ system on structural, electrical, optical and sound level characteristics in order to develope the piezoelectric and electrooptic ceramic devices. Also the specimens were prepared by the two stage sintering technique. The molecular formular was X($CaO{\cdot}1/4La_{2}O_{3}{\cdot}1/4Nb_{2}O_{5}){\cdot}(1-X)Pb(Zr_{Y}Ti_{1-Y})O_{3}$(x=100X, y=100Y), and the variation of x was $6{\sim}12$, y was 60${\sim}$49 and second stage sintering time was 20${\sim}$40 hours. The experimental results obtained from this study are as follows : 1. The density was decreased, the grain size was increased according to increase of Ca-La-Nb substitution. 2. The crystal structure was rhombohedral in composition 6/60/40, and the crystal structure was tetragonal and cubic according to increase of Ca-La-Nb substitution. 3. The Ca substitution of PZT system enhanced the sintering property. The Pb site vacancy resulting from the substitution of La-Nb increased the dielectrical constant, the piezoelectric charge constant, the dielectric loss and decreased the coercive field. 4. The resistivity of PZT system which has the P type conduction mechanism increased according to substitution of La-Nb because of the substituent acting as donor. 5. The PZT ceramics varied from ferroelectric substance according to increase of Ca-La-Nb substituent. The coercive field and saturation remanent polarization decreased, and at last straight line according to increase of La-Nb substitution. 6. The amount of Ca-La-Nb substitution to improve the light transmittance of speciment was 10 mol%, the Zr/Ti ratio was 49/51, and the second stage sintering time was 40 hours. 7. According to Ca-La-Nb substitution, the specimens was to be transparent. The 7.5/51/49 specimen was suitable for transparent sound vibrator because it had 58% light transmittance (thick 0.2[mm], wave length 700[mm]) and 48% electromechanical coupling factor.

• 반도체디스플레이기술학회지
• /
• 제15권2호
• /
• pp.26-31
• /
• 2016

The Townsend to glow discharge mode transition was investigated in the dielectric barrier discharge (DBD) helium plasma source which was powered by 20 kHz / $4.5 kV_{rms}$ high voltage at atmospheric pressure. The spatial profile of the electric field strength at each modes was measured by using the intensity ratio method of two helium emission lines (667.8 nm ($3^1D{\rightarrow}2^1P$) and 728.1 nm ($3^1S{\rightarrow}2^1P$)) and the Stark effect. ICCD images were analyzed with consideration for the electric field property. The Townsend discharge (TD) mode at the initial stage of breakdown has the light emission region located in the vicinity of the anode. The electric field of the light emitting region is close to the applied field in the system. Immediately, the light emitting region moves to the cathode and the discharge transits to the glow discharge (GD) mode. This mode transition can be understood with the ionization wave propagation. The electric field of the emitting region of GD near cathode is higher than that of TD near anode because of the cathode fall formation. This observation may apply to designing a DBD process system and to analysis of the process treatment results.

• 융합신호처리학회논문지
• /
• 제9권1호
• /
• pp.10-17
• /
• 2008

본 논문은 설비진단에 있어 크랙 성장부터 누설에 이르기까지 결함으로 발생하는 AE 신호를 통하여 위치를 표정하여 진단 시스템의 오차를 줄이는 것이다. wavelet을 이용한 잡음 제거로서 위치표정의 개선을 제안하였고, 실험을 위한 신호원으로 알루미늄 평판에 샤프심 파단음을, 공기압축기의 누설음을 사용하였다. 신호원에 대하여 웨이블릿 Shrinkage방법과 Soft Threshold을 이용한 신호의 잡음제거 및 시간 도달차 법과 물성치를 적용한 속도 값으로 시뮬레이션을 통하여 위치표정 결과를 확인하였다. 그 결과 웨이블릿 변환을 이용한 잡음제거는 크랙실험의 경우 평균거리 10.46mm이하로 30% 이상과 누설 실험의 경우 평균필터에 비해 2%의 개선된 위치표정을 확인하였다.

• Journal of Radiation Protection and Research
• /
• 제41권4호
• /
• pp.339-343
• /
• 2016

Background: Evaluation of deoxyribonucleic acid (DNA)-strand break is important to elucidate the biological effect of ionizing radiations. The conventional methods for DNA-strand break evaluation have been achieved by Agarose gel electrophoresis and others using an electrical property of DNAs. Such kinds of DNA-strand break evaluation systems can estimate DNA-strand break, according to a molecular weight of DNAs. However, the conventional method needs pretreatment of the sample and a relatively long period for analysis. They do not have enough sensitivity to detect the strand break products in the low-dose region. Materials and Methods: The sample is water, methanol and plasmid DNA solution. The plasmid DNA pUC118 was multiplied by using Escherichia coli JM109 competent cells. The resonance frequency and Q-value were measured by means of microwave dielectric absorption spectroscopy. When a sample is located at a center of the electric field, resonance curve of the frequency that existed as a standing wave is disturbed. As a result, the perturbation effect to perform a resonance with different frequency is adopted. Results and Discussion: The resonance frequency shifted to higher frequency with an increase in a concentration of methanol as the model of the biological material, and the Q-value decreased. The absorption peak in microwave power spectrum of the double-strand break plasmid DNA shifted from the non-damaged plasmid DNA. Moreover, the sharpness of absorption peak changed resulting in change in Q-value. We confirmed that a resonance frequency shifted to higher frequency with an increase in concentration of the plasmid DNA. Conclusion: We developed a new technique for an evaluation of DNA damage. In this paper, we report the evaluation method of DNA damage using microwave dielectric absorption spectroscopy.

• 한국결정학회지
• /
• 제13권1호
• /
• pp.25-30
• /
• 2002

M/sub 1-x/Na/sub 2x/Al₂(BO₃)₂O (M = Ca and Sr) 고용체계는 치환형과 틈새형 고용체를 동시에 갖는다. 이상의 고용체계 물질에 첨가된 발광원자의 에너지 전이는 발광원자, Eu 주위의 대칭성에 깊은 관계가 있다 Eu/sup 3+/ 이온의 경우, Eu/sup 3+/ 이온의 주변 대청성에 따라서 매우 밝고 효율적인 발광성 불순물이 될 수 있기 때문에 구조와 연계한 연구가 가능하다. Eu/sup 3+/: Ca/sub 1-x/Na/sub 2x/Al₂(BO₃)₂O 고용체계의 Na원자 양이 증가함에 따라 Eu3+ 이온의 대칭성이 낮아진다. CaAl₂(BO₃)₂O 화합물은 Ca 원자 중심의 팔면체 구조를 갖기 때문에, 조성비 x의 증가와 함께, 화합물의 낮은 대청성에 의해서 Eu/sup 3+/:Ca/sub 1-x/Na/sub 2x/Al₂(BO₃)₂O 고용체계의 /sup 5/D/sub 0/→/sup 7/F₁(590 nm) 전이의 상대적인 세기가 감소한다. 그러한 또 다른 예는 비대칭성 물질인 Eu/sup 3+/:SrAl₂(BO₃)₂O 화합물에서도 찾아 볼 수 있었다.

• Journal of Magnetics
• /
• 제7권2호
• /
• pp.29-39
• /
• 2002

The initial NiCuZn synthetic ferrite were acquired from thermally decomposing the metal nitrates $Fe(NO_3)_39H_2O, Zn(NO_3)_26H_2O, Ni(NO_3)_26H_2O, and Cu(NO_3)_23H_2O$ at $150^circ{C}$ for 24 hours, and then we calcined the synthetic powder at $500^circ{C}$, pulverized each of those for 3, 6, 9, 12, and 15 hours in a steel ball mill, sintered each at $700^circ{C}$ to $1,000^circ{C}$ for 1 hour, and thus studied their microstructures and electromagnetic properties. We could make the initial specimens chemically bonded in liquidity at a low-temperature $150^circ{C}$, by using the low melting points less than $200^circ{C}$ of the metal nitrates instead of the mechanical ball-mill pulverization, then narrow a distance between the particles into a molecular one, and thus lower the reaction point of sintering by at least $200^circ{C}$ to $300^circ{C}$. Their initial permeability was 50 to 400 and their maximum magnetic induction density and coercive force, 2,400 G and 0.3 Oe to 0.5 Oe respectively, which was similar to those of NiZnCu ferrite synthesized in the conventional process. In the graph of initial permeability by frequencies, a $180^circ{C}$ rotation of the magnetic domains which appears in a broad band of micro-wave before and after the resonance frequency, could be perceived.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 C
• /
• pp.1657-1658
• /
• 2006

An external electrode fluorescent lamps (EEFLs) have the advantage of a long lifetime in the early stages of the study on plasma discharge, interest in the lamp continues. Studies on the operation of external electrode fluorescent lamps have focused mainly on its use of a type of high frequency (MHz). By performing high brightness using a square wave operation method with the low frequency below 100kHz, which is applied to a narrowed tube type lamp that has several mm of lamp diameter. To solve these problems of CCFL, EEFL (External Electrode Fluorescent Lamp) is introduced. Because electrode of EEFL is on the outer surface of discharge tube, the electrode is perfectly prevented from the sputtering by accelerated ions. And it is possible to drive the many CCFLs at the same time, because EEFL shows the positively resistant characteristic. But EEFL has the large non-radiative power loss in sheath. In this study the novel electrode structure was introduced in order to reduce non-radiative power loss in sheath of EEFL. The novel electrode structure comes from the idea to combine conceptually capacitive discharge with inductive discharge. Thus, this study verifies the change in the optical characteristics according to the change in electrode structure through a Maxwell's electromagnetic field simulation and examines the relationship between the change in the EEFL electrode structure and brightness by measuring the optical characteristics.

• 지질공학
• /
• 제11권2호
• /
• pp.191-203
• /
• 2001

포천 화강암에 대하여 결의 방향성에 따른 역학적 이방성 및 미세균열의 발달관계를 규명하였다. 일축압축강도는 177MPa∼212MPa의 범위를, 탄성계수는 48GPa∼62GPa, 인장강도는 6.9MPa∼8.5MPa, 탄성파 속도는 3,200m/sec∼3,700m/sec의 범위를 보인다. 이방성 비는 역학적 특성에 따라 최소 14%에서 최대 24%이며 1결에 의한 영향이 가장 크게 나타난다. 미세균열의 방향성은 결의 방향성과 상당한 연관성을 가진다. 그러나 장석 내에는 결정의 방향에 따라 미세균열들이 발달해 있어서 결의 방향과는 상당한 차이를 보이나, 석영 내에는 연장성이 매우 좋고 결의 방향과 거의 평행한 방향으로 많은 미세균열들이 발달해 있어서 석영 내에 발달한 미세균열의 방향성이 결의 방향을 지배하는 것으로 사료된다. 차분 변형률 분석과 현미경 관찰에 의한 미세균열의 방향성은 대체로 결의 방향과 상당히 유사하나, 각각의 측정 방법에 따라 약간의 차이를 보인다. 이러한 결과는 차분변형률이 미세균열의 폭을 측정하는 반면에 현미경 관찰은 길이나 개수를 측정하기 때문인 것으로 사료된다.

• 한국방재학회:학술대회논문집
• /
• 한국방재학회 2008년도 정기총회 및 학술발표대회
• /
• pp.89-92
• /
• 2008

The extreme heat watch warning system(EHWWS) that Korea Meterological Administration carried out a preliminary from July 1, 2007, considered both daily maximum temperature and daily maximum heat index simultaneously. It was requested revision of the standard level of EHWWS to solve the difficulty of forecasting occurred when we were considering two parameters simultaneously and we did not considering heat index according to areas. For this, we established three type standard, such as type 1 that considered both daily maximum temperature and daily maximum heat index, Under the extreme heat day that daily minimum temperature was more than $25^{\circ}C$, type 2 that considered daily maximum temperature and type 3 that considered only daily maximum heat index and then analyzed whether these 3 types satisfies the excess mortality of the extreme heat warning or not. As a results, type 1 and 2 were more explain away excess mortality each warning step than type 3. type 2 could also apply case of not to consider heat index according to areas and had a merit for extreme heat forecasting easily because the standard was simple. Therefore we think type 2 is more suitable and reasonable standard for Korea extreme heat watch warning system(KEHWWS) than type 1. In addition, we need to develop model that exactly predicts the excess mortality will be take place during the extreme heat warning and construct KEHWWS.

• 한국재난정보학회 논문집
• /
• 제8권4호
• /
• pp.419-431
• /
• 2012

우주기상 극대기인 2003년은 지구상에 크나큰 재앙을 초래할 것으로 예견되고 있다. 특히 근년에 들어 지자기 폭풍에 의한 손상과 가시화 될 수 있는 대 폭풍피해 사례를 보이고 있다. 본 연구에서는 이상에서 제시된 문제점에 대한 피해분석에 따른 궁극적인 우주기상정보시스템 모델 구축으로 피해 저감하고 대비방안을 설정하는 것이다. 구현방법으로는 uIT기반과 GIS기반의 우주기상 정보시스템 구축으로 우주폭풍에서 방사되는 우주복사폭풍(flare), 우주입자폭풍(solar proton event), 우주자기폭풍(geomagnetic storm) 등에 의한 분야별 폭풍피해를 분석하여 유형별 피해 대응에 대비할 수 있도록 하였다. 이로써 공간정보기반의 우주폭풍 전기전자 피해대비 운영관리시스템 구현은 GIS기법에 의한 의사결정지원 시스템으로 피해예측 및 방재환경을 스마트 IT환경과 융합한 첨단 정보시스템으로 구현하여 인명과 재산을 보전할 수 있는 방안으로 활용될 수 있을 것이다.