• International Journal of Aeronautical and Space Sciences
• /
• 제15권3호
• /
• pp.309-319
• /
• 2014

This paper mainly focuses on the conceptual design and stealth performance of the three-surface military aircraft. A three-dimensional (3-D) digital mock-up of the three-surface strike fighter with stealth feature was designed and the schemes of carrying missiles were analyzed in CATIA. Based on physical optics principle and the Method of Equivalent Currents (MEC), a numerical simulation of the RCS feature of the aircraft was carried out with RCSPlus which is a software designed by Beihang University. The paper contributes to the RCS feature analysis of the whole plane and different parts on X-band, S-band and UHF-band and a comparison of RCS feature to Su-37 and T-50 military aircraft is drawn. On X-band, the pitch angle of the incident wave was $0^{\circ}$, and the result shows: (1) Compared with Su-37 aircraft, the forward scattering RCS of the three-surface strike aircraft was reduced to 14.9%, the side scattering RCS to 9.6% and the back scattering RCS to 40.2%. (2) Compared with T-50 aircraft, the forward scattering RCS was reduced to 38.61%, and the side scattering RCS to 67.26%. This paper should be useful for researchers in conceptual design and stealth technology of the military aircraft.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2015년도 춘계학술대회
• /
• pp.343-345
• /
• 2015

현재 SAW Device는 좁은 대역폭으로 원하는 주파수만 통과 시키는 특성을 이용한 주파수 필터로 사용되고 있다. 하지만 무전원으로 영구적인 사용이 가능하다는 장점이 있기 때문에 다양한 분야로 활동 분야가 넓어지고 있다. 이러한 SAW Device를 이용한 센서 태그는 많은 연구가 이뤄졌지만, 아직 Reader Platform에 대한 개발이 미비한 상태이다. SAW Device를 이용한 ID Tag의 값을 읽는 방법에는 시간 영역 샘플링(TDS) 방식과 주파수 영역 샘플링(FDS) 방식이 있다. 본 연구에서는 고속의 샘플링을 요구하지 않아 상대적으로 느린 샘플링 속도로 고속의 프로세싱을 요구하는 FDS 방식을 사용한다. 기존의 FDS 방식의 Reader Platform은 PC를 통하여 ID를 검출하는 방식이었으나 Cortex-A9 프로세서를 기반으로 하여 저가, 소형, 실시간의 임베디드 Reader Platform을 구현한다.

• 한국통신학회논문지
• /
• 제21권12호
• /
• pp.3205-3214
• /
• 1996

In this paper, the microstrip phased array antennas with coupling-slots for the base station of mobile communication is proposed and anlyzed with accurate analysis method which is based on both reciprocity principle and full-wave analysis. The basis functions used for the numerical analysis are determined depending upon the accuracy, convergence properties of the solution, and the computation time. The patch uses 3 EB mode and the slot uses IPWS mode. The designed phased array antenna has 8 slot-coupled microstrip patch array elements and the beam scanning capability is obtained by using the 4-bit PIN-diode phase shifters as switching devices which are consisted of the loaded line phase shifters for 30.deg. and 60.deg. and the reflection type phase shifters for 90.deg. and 180.deg. repectively. The 4-bits phase shifters which aremade by connecting each phase shifter have about 2.deg.-3.deg. phase errors and their insertion loss are about 3dB for each phase state. The fabricated 8-element phased array antenna with 4-bits phase shifters provides 12.deg.-14.deg. beamwidths depending on the scanning angle and is capable of scanning its beam to .+-.45.deg. with 9.deg. intervals, and the gain 12dBi. The overall results show that the slot-coupled phased array antenna has great advantages of wideband, high gain and reduced spurious radiation. Also, the antenna can be made small and thin. Furthermore, the scanning property of this antenna allows for its application in several areas, such as mobile communication system and PCS.

• 대한기계학회논문집A
• /
• 제35권7호
• /
• pp.773-778
• /
• 2011

포신과 같은 충격하중을 받는 파이프 형태의 구조물 진동을 측정하기 위해 가속계가 널리 사용된다. 포약의 폭발로 인해 발생하는 응력파는 포신의 횡진동에 미미한 영향을 미치지만 매우 큰 가속도 성분을 가지고 있어 미세 진동의 계측을 어렵게 한다. 기계적 필터는 가속도계를 부착하는 기계적 구조물과 진동감쇠재료로 구성되어, 고주파의 응력파를 제거하고 횡진동에 관련된 가속도 성분만을 가속도계로 전달하는 역할을 한다. 진동감쇠재료는 비선형성이 강하여 수학적 모델링이나 수치적 해석에 어려움이 있다. 본 논문에서는 9 가지의 진동감쇠재료의 진동특성을 실험적으로 확인하여, 기계적 필터에 가장 적합한 재료를 선택하였다. 또한, 압착에 따른 진동특성의 변화를 통해, 기계적 필터의 설계 데이터를 얻을 수 있었다. 기계적 필터를 설계 제작하여, 필터의 성능을 확인하였다.

• Journal of Preventive Medicine and Public Health
• /
• 제42권5호
• /
• pp.275-282
• /
• 2009

Objectives : This study aimed to verify the association between wealth or income level and health status after adjusting for other socio-economic position (SEP) indicators among Korean adults aged 45 and over. Methods : Data were obtained from the 1st wave of Korean Longitudinal Study of Ageing (households: 6,171, persons: 10,254). We used self-rated health status and activities of daily living (ADLs) as dependent variables. Explanatory variables included both net wealth measured by savings, immovables, the other valuated assets and total income including pay, transfer, property and so on. Binary logistic regression was conducted to examine the relationships. Also, in order to determine the relative health inequality across economic groups, we estimated the relative index of inequality (RII). Results : The inequality of health status was evident among various wealth and income groups. The wealthiest group (5th quintile) was much healthier than the poorest group, and this differential increased with age. Likewise, higher income was associated with better health status among the elderly. However, these effects, as measured by the odds ratio and RII, showed that wealth was more important in determining health status of elderly people. Conclusions : This study suggests that economic capability plays a significant role in determining the health status and other health-related problems among the elderly. Particularly, our results show that health status of the aged is related more closely to the individual s wealth than income.

• 한국정밀공학회지
• /
• 제26권1호
• /
• pp.71-81
• /
• 2009

Die steel for plastic molding were used as mold material of automobile parts and electronic component industry. The material of this paper has superior to mechanical properties, such as repair weldability, corrosion resistance and high temperature strength, required mold parts for semitransparent. Laser-induced surface hardening technology is widely adopted to improver fatigue life and wear resistance via localized hardening at the surface of mold parts. The objective of this research work is to investigate on the characteristics of surface hardening of the laser process parameters, such as beam travel speed, laser power and defocsued spot position, for the case of die steel for plastic molding. Lens for surface hardening of large area is plano-convex type with elliptical profile to maintain uniform laser irradiation. According to the experimental results, large size of hardened layer at the surface of die steel for plastic molding was achieved, and microstructure of this layer was lath martensite. Optimal surface status and mechanical property of hardened layer could be obtained at 1095Watt, $0.25{\sim}0.3m/min$, 0mm (focal length: 232mm) for laser power, beam travel speed, and focal position. Where, heat input was $0.793{\times}10^{3}J/cm^2$, and width of hardened layer was 27.58mm.

• 한국공작기계학회논문집
• /
• 제16권4호
• /
• pp.1-12
• /
• 2007

S45C steel has been widely used in industrial applications, such as crank shafts, gears, main spindles of machine tools, connecting rods, etc., because of its distinguished mechanical property. In the convention arc welding of S45C plates without heat treatments, it is possible for welding defects to take place, such as a void or a hot-crack, due to a high carbon composition of S45C. Laser welding process is widely used in the industrial field due to its numerous advantages: a small heat affected zone(HAZ), deep penetration, high welding speed, single-pass thick section capability, and small distortion after welding. The objective of this research works is to investigate the influence of the process parameters, such as power of laser and welding speed, on the characteristics of laser welding for the case of nickel coated and nickel uncoated S45C steel. As the result of the experiment, in case of butt welding, nickel coated S45C steel has a uniform formation of welding zone and it was judged that the welding nature was better as inner defects and the quantity of spatter were formed relatively fewer than nickel uncoated S45C steel.

• 자원환경지질
• /
• 제39권4호
• /
• pp.495-505
• /
• 2006

인간의 가청주파수 보다 낮은 저주파수대역의 음파로 정의되는 인프라사운드는 대기압력 변화를 수반하는 다양한 자연현상이나 인간 활동에 의해 지속적으로 발생하여 대기 중으로 전파하고 있다. 인프라사운드의 장거리 전파특성은 음원에 대한 원거리 관측과 분석을 가능하게 하여 자연현상에 대한 지구물리학적인 이해와 대규모 인위적 음원에 대한 탐지기술로 응용되고 있다. 이에 최근 비밀 핵실험 감시와 순수한 지구물리학적 연구를 목적으로 진보된 관측망이 전 세계적으로 구축되는 등 인프라사운드에 대한 관심과 연구가 증가하고 있다. 국내에는 지진파와 인프라사운드를 동시에 관측할 수 있는 지진-음파 관측망이 운영되고 있으며, 이들 자료의 실시간 관측과 분석으로 한반도 및 주변지역에서 발생하는 지진 중 상당수의 인공지진을 명확히 식별하고 있다. 또한 인공지진탐지 이외에도 대규모 자연지진, 운석폭발, 화산폭발, 태풍 등의 자연현상에서 발생한 인프라사운드를 국내 관측망에서 관측하여 분석하고 있다. 지구 물리학적 관점에서 인프라사운드 관측은 상부지각과 대기권 등 지구표면에서 일어나고 있는 대규모 자연 혹은 인위적 현상을 관측할 수 있는 새로운 지구관측기술의 하나로 이용되고 있다.

• 대한후두음성언어의학회지
• /
• 제16권1호
• /
• pp.68-75
• /
• 2005

The treatment of sulcus vocalis and vocal bowing has been commonly used Thyroplasty Type surgery or injection within vocal folds such as Teflon, silicone, collagen. However, and treatment has not been acquired satisfactory treatment effect. This study was conducted to demonstrate voice therapy effect using singer's vocal technique and respiratory training. 4 patients (1 male, 3 females) with sulcus vocalis or bowing, with or without scar were selected for this study and we compared with acoustic, aerodynamic measures and stroboscopy observation before and after voice therapy. The results showed that 1) case 1 (48yr, male) with sulcus vocalis decreased F0 (Fundamental Frequency), increase CQ(Close Quotient) and high degree of satisfaction but not improved voice quality after voice therapy. 2) case 2(19yrs, femal) with mild sulcus vocalis improved as normal voice quality after voice therapy. 3) case 3(38yrs, female) with functional bowing showed abnormalvocal contact before therapy whereas CQ was increased after voice therapy. 4) case 4(27yrs, female) with vocal atrophy and vocal bowing changed normal range of Fo and increased CQ after voice therapy. Even though contact area of both vocal folds was increased and lowered F0 after voice therapy, current outcomes revealed that normal voice quality was not regained. These results might signify that it was difficult that vocal folds couldn't be recovery of symmetry and viscoelastic property of mucosal wave through voice therapy. However, it was difficult for this study to maintain voice therapy so that evaluate effect of voice therapy for long-term. Further study will be needed to long-term follow-up for voice therapy with these patients.

• 터널과지하공간
• /
• 제22권5호
• /
• pp.354-364
• /
• 2012

본 연구에서는 석회암 지반에서 광산개발이나 토목공사를 수행할 때 데이터베이스로 활용될 수 있는 암석의 기초 물성들을 파악하기 위하여, 제천지역 석회암을 대상으로 수많은 실내 역학시험을 실시하여 암석의 단위중량, 흡수율, 간극률, 탄성파 속도, 쇼어경도, 일축압축강도, 인장강도, 영률, 포와송비, 점착력, 내부마찰각 등의 각종 물리적 성질을 조사하였다. 연구 지역에 분포하는 회색석회암과 이질석회암의 역학적 특성을 비교 검토하였으며, 이질석회암은 회색석회암에 비하여 단위중량은 작고 간극률과 흡수율은 크게 나타나 각종 역학적 특성은 상대적으로 작게 평가되었다. 또한 Mohr-Coulomb 파괴기준과 Hoek-Brown 파괴기준을 적용하여 제천 석회암의 파괴조건을 해석하였으며, 여러 가지 물성간의 단순회귀분석과 다중회귀분석을 통해 물성 상호간의 관련성을 알아보았다.