• 보존과학연구
• /
• s.13
• /
• pp.69-80
• /
• 1992

A great numbers of cultural properties destroyed though attack by insect pests and microorganisms. Biodeterioration damage is particularly serious in this country because many cultural propertiese are made of organic materials. Recently, there are various countermeasures of biodeterioration or alternative methods are reported, such as Gamma Radiation, Micro-wave Irridation, Freezing, Inert Atmosphere (Oxygen-less atmosphere), and Environmental Control. However its practical application are limited and some difficulties for treatment of large objects. Fumigation is one of the most useful and effective methods of control biodeterioration because it gives less damage of cultural properties but rapidly eradicate infesting organisms at one action. This paper evaluated selected fumigants and fumigation methods with emphasis on the following paragraph:1) Effectiveness of selected fumigants on insects and microbes involved inbiodeterioration.2) Physical and chemical characters of selected fumigants.3) Less toxic new alternative fumigant and its mixtures.4) Inert atmosphere (Oxygen-less atmosphere)5) Methods of fumigation : Sealed fumigation, Covered fumigation and Vacuum fumigation (Reduced-pressure fumigation)

• Bulletin of the Society of Naval Architects of Korea
• /
• v.24 no.1
• /
• pp.1-8
• /
• 1987

It is shown that irregular frequencies in the source and doublet distribution method, can be eliminated if the Green function associated with Kelvin's source of pulsating strength, is modified only in the region inside the body at the level of the undisturbed free surface. The system of the resulting Green integral equation is augmented without loss of the square-integrable property of its kernel so hat the discretisation yield N linearly independent equations for N unknown variables. From the solution, the potential and velocity at any point on the wetted surface of a surface-piercing body can be found using the properties of the double layer composed of the source and normal doublet distribution.

• Journal of Industrial Technology
• /
• v.32 no.A
• /
• pp.79-86
• /
• 2012

In this paper, centrifuge model tests and numerical analysis on the breakwater structure were performed to investigate the stability and behavior of breakwater in field. In centrifuge model tests, construction sequence of breakwater structure such as preparation of weathered rock and sand deposit, construction of D.C.M, rubble mound with crushed stones and installment of breakwater structure was reconstructed like field condition and the behavior of ground settlement and breakwater displacement during stage of construction was observed during tests. For the final stage of simulating the horizontal movement of breakwater due to wave force, horizontal load was applied by horizontal loading apparatus being specially designed so that horizontal displacement of structure could be observed. Numerical analysis were also carried out and its results were compared with test results to assess the property of centrifuge model tests with respect to the behavior of structure as well as ground.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2002.10a
• /
• pp.467-474
• /
• 2002

Colluvial sell has a very unique deformation property, particularly when it is subject to the cutting work entailed in a variety of construction. In this study, the cut slope tying on a colluvial layer in which the transmission tower had been installed were investigated to find out the cause of deformation. In-situ tests such as boring, surface-wave analysis (MASW) were employed to look into the physical composition of underground layers and FEM including LEM were carried out to simulate the construction steps. The result shows that the stress relaxation followed by road construction induced the deformation of the slope and damage in the foundation of the transmission tower.

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 1986.04a
• /
• pp.184-188
• /
• 1986

The gain variations of paraboloid reflector antenna with an axially and perpendicularly defocused feed are investigated using the Huygens-Fresnel Principle. The theoretical calculations and the experimental for the reflector antenna with an axially defocused feed are compared. Although there were about 3dB difference between two results in a range from focal point to 2.0 wave-length, we could know that it was property approached to theoretical results. However, when the magnitude of defocusing is increased, the differences are also increased because of the influence by a weak received signal and interference of external noises. In addition, it can be shown that gain variations are acutely decreased more in perpendicular defocusing than in axial defocusing in the paraboloid reflector antenna.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2000.10a
• /
• pp.75-82
• /
• 2000

A huge offshore structures such as immersed tunnel, ice-resisting wall are continuously subjected to large force from water pressure, wave action and impact loads. Composite steel-concrete structure of sandwich system has profitable advantages for a huge offshore structures. This composite structures should exhibit a high degree of strength and ductility, because of concrete confining effect and the property of steel plate. Therefore, it endures large deformation and absorbs a great deal of energy until failure. In this study, nonlinear analysis for composite steel-concrete structure of sandwich system was carried out, and certify the effects of various parameters, elastic·plastic behavior characteristic, load-carrying and failure mechanism.

• 한국전산유체공학회:학술대회논문집
• /
• 2003.08a
• /
• pp.5-10
• /
• 2003

In order to reduce the excessive numerical dissipation, the new spatial discretization scheme is introduced. The present method in this paper has the formula that has an additional procedure of defining transferred properties at a cell-interface, based on AUSMPW+. The newly defined transferred property could eliminate numerical dissipation effectively in non-flow aligned grid system. In addition, the present method guarantees the monotonic characteristic in capturing a discontinuity. Through a stationary or moving contact discontinuity and a stationary or moving shock discontinuity, a vortex discontinuity and shock wave/ boundary layer interaction, it is verified that the accuracy of the present method is improved.

• Proceedings of the KSR Conference
• /
• 2003.05a
• /
• pp.388-392
• /
• 2003

In this study, various railroad geotechnical informations were standardized. The standardization was progressed by classifying the informations as basic properties, railroad vibrations and design plans. Basic informations included soil properties(27), dynamic property(1), geophysical prospecting(1), and elastic wave prospecting(4). Specification for 'human exposure to whole-body vibration' was used to construct the information of railroad vibration. And in the case of the information of design plan, the way to save by graphic files was chosen. Thus standardized informations examined their application by setting up database. Entity-Relation(E-R) model was used in the design of database and by this, the database system was constructed. This database system will be able to serve the performance enhancement of railroad system.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.2 no.1
• /
• pp.34-45
• /
• 1984

The condition of underground basic rock and the location of cavern site can be found by means of seismic surveying is one of the physical exploration methods by which the prelimirary investigation of underground storage constructions are made in order to maximize the use of a land. This study is valuable in the point of showing a method for the decision of the property of a underground facilities estabilishment, by analying the elastic wave velocity and the distribution of a lower velocity zone and by grasping the weak zone of the basic rock.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2004.11a
• /
• pp.789-792
• /
• 2004

This study aims to detect only voids and estimate the cross-sectional size and thickness of voids using radar. A new method based on radar image processing is carried out with various void sizes and depths. The regression relationship between void size which has different depth and the amplitude characteristics of the radar return is considered in a new method of this research. For the purpose of examining; this regression relationship, experiments with change of void depth, surface area and thickness were carried out. Finally, the threshold value for image processing which aims to represent only voids to be fitted size (width) can be obtained. As the results, a proposed method in this study has a possibility of detecting only voids and estimating void size and thickness with good accuracy.