• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 추계학술대회논문집
• /
• pp.950-953
• /
• 2006

The floor impact noise of concrete structures in apartments buildings is affected from the flexural wave propagation characteristics. Accordingly, the measurement of wave propagation characteristics is required for suggestion of efficient method to reduce the impact noise. The purpose of this article is to propose an experimental technique to measure dynamic properties of concrete structures. The method was proposed using the flexural wave propagation characteristics. Wave speeds, bending stiffness and their loss factors are estimated from which the vibration dissipation capabilities are investigated. Several different concrete beam structures were custom-built for measurement. The damping treatments using viscoelastic materials for reducing noise generation are also tested. The beam transfer function of the damped beam is predicted using the compressional damping model from which the mechanism of the vibration energy dissipation is investigated.

• 한국생산제조학회지
• /
• 제21권1호
• /
• pp.182-189
• /
• 2012

This study suggests a dynamic design process for deciding properly design parameters of a mass-spring type Wave Energy Converter (WEC) to achieve sufficient energy conversion from wave to power generator. The WEC mechanism, in this research, consists of a rigid sprung body, a platform, suspension springs and dampers. The rigid sprung body is supported on the platform via springs and dampers and vibrates translationally in the heave direction under wave excitation. At last the resulting heave motion of the sprung body is transmitted to rotating motion of the electric generator by rack and pinion, and transmission gears. For the purpose of vibration analysis, the WEC mechanism has been simply modelled as a mass-spring-damper system under harmonic base excitation. Its maximum displacement transmissibility and steady state response can be determined by using elementary vibration theory if the harmonic ocean wave data were provided. With the vibration analysis results, the suggested dynamic design process of WEC can determine all the design parameters of the WEC mechanism, such as sprung body mass, suspension spring constant, and damping coefficient that can give sufficient relative displacement transmissibility and the associated inertia moment to drive the electric generator and transmission gears.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1995년도 추계학술발표회논문집(1)
• /
• pp.321-326
• /
• 1995

The present study provides some experimental observations on the structural developments of bubbly flow and the void wave damping in vertical, circular channel with a large diameter, and discusses the channel size effect on them. It is observed that the developing mode of bubbly flow structures and its transition mechanism are influenced by the channel size as well as the bubble size, and that they are well revealed in the behavior of wave damping.

• Ocean Systems Engineering
• /
• 제3권3호
• /
• pp.203-217
• /
• 2013

A PTO (power-take-off) mechanism by using relative heave motions between a floating buoy and its inner mass (magnet or amateur) is suggested. The inner power take-off system is characterized by a mass with linear stiffness and damping. A vertical truncated cylinder is selected as a buoy and a special station-keeping system is proposed to minimize pitch motions while not affecting heave motions. By numerical examples, it is seen that the maximum power can actually be obtained at the optimal spring and damper condition, as predicted by the developed WEC(wave energy converter) theory. Then, based on the developed theory, several design strategies are proposed to further enhance the maximum PTO, which includes the intentional mismatching among heave natural frequency of the buoy, natural frequency of the inner dynamic system, and peak frequency of input wave spectrum. By using the intentional mismatching strategy, the generated power is actually increased and the required damping value is significantly reduced, which is a big advantage in designing the proposed WEC with practical inner LEG (linear electric generator) system.

• 한국해안·해양공학회논문집
• /
• 제21권1호
• /
• pp.39-44
• /
• 2009

쇄파대 파랑모의의 정확도를 높이기위해 타원형 완경사방정식에 Shuto의 경험식에 근거한 비선형 천수효과를 도입하였고 쇄파구조를 추가하였다. 천수 실험을 통해 상대수심과 심해 파형경사에 따른 천수계수의 변화를 확인한 결과 Shuto의 비선형 천수식과 잘 일치하였다. 쇄파실험에서 비선형 천수효과로 인해 선형모형에 비해 상승된 파고 분포를 확인할 수 있었고 실험치와 잘 일치하였다. 쇄파구조는 1/10 경사지형에서는 실험치와 잘 일치하였지만 1/20 경사지형에서는 과도한 에너지 감쇄를 보여주었다.

• 천문학회지
• /
• 제43권6호
• /
• pp.201-211
• /
• 2010

We present an analysis of the measurements of mid-eclipse times of V839 Oph, collected from literature sources. Our analysis indicates a period increase of $3.2{\times}10^{-7}$ day/yr. This period increase of V839 Oph can be interpreted in terms of mass transfer of rate $1.76{\times}10^{-7}M_{\odot}/yr$, from the less to the more massive component. The O - C diagram shows a damping sine wave covering two different complete cycles of 36.73 yr and 19.93 yr with amplitudes approximately equal to 0.0080 and 0.0043 day, respectively. The third cycle has to be expected to cover about 13.5 years with lower amplitude than those of the former two cycles. These unequal duration cycles show a non periodicity which may be explained as resulting from either the presence of a tertiary component to the system or cyclic magnetic activity variations due to star spots. For the later mechanism, the obtained characteristics are consistent when applying Applegate (1992) mechanism.

• 한국항공우주학회지
• /
• 제47권8호
• /
• pp.599-606
• /
• 2019

펄스건 장치는 연소실 내, 다중 분사기 배열에 따른 연소 유동장으로의 횡단 압력파 전파/감쇠 메커니즘 규명을 목적으로 제작되었다. 제작된 펄스건은 성능시험을 통해 목표 연소압에서의 운용 가능 여부와 압력파 강도 제어 여부를 확인하였다. 기체질소를 사용하여 고압관에 가압을 하였으며 다이아프램에는 $100{\mu}m$ 두께의 OHP 필름을 사용하였다. 압력파의 속도와 강도를 확인하기 위해 압력 트랜스듀서를 이용하여 동압과 정압을 측정하였다. 제작된 펄스건은 공급압력에 따라 압력파의 강도 조절이 가능하며 횡방향성을 가지는 압력파를 생성할 수 있음을 성능시험을 통해 확인하였다.

• 대한토목학회논문집
• /
• 제28권2B호
• /
• pp.249-259
• /
• 2008

본 연구에서는 투과성잠제의 비탈면경사가 주변 파동장에 미치는 영향을 검토하기 위해 투과성구조물에 의한 유체저항(관성저항, 층류저항 및 난류저항)을 고려할 수 있는, 즉 파-구조물-지반의 상호작용을 해석할 수 있는 수치모델에 LES 난류모델을 도입한 새로운 수치해석기법(LES-WASS-2D)을 제안하여 기존에 수행되었던 수리모형실험과의 비교를 통하여 검증하였다. 이러한 수치해석기법을 이용하여 투과성잠제의 비탈면경사의 변화에 대한 수치모의를 수행한 결과, 비탈면경사가 완만해질수록 반사율 및 투과율이 감소함과 동시에 에너지손실(Energy loss)이 커지는 것을 알 수 있었다. 또한, 잠제의 비탈면경사의 변화에 따른 마루에서 쇄파점의 위치 및 잠제 배후에서의 순환류와 평균와도의 규모에 대해서도 논의하였다.

• 천문학회지
• /
• 제44권3호
• /
• pp.97-108
• /
• 2011

The photometric light curves of the W-type W UMa eclipsing contact binary system BB Pegasi have been found to be extremely asymmetric over all the observed 63 years in all wavelengths UBVR. The light curves have been characterized by occultation primary minima. Hence, the morphology of these light curves has been studied in view of these different asymmetric degrees. The system shows a distinct O'Connell effect, as well as depth variation. A 22.96 years of stellar dark spots cycle has been determined for the system. Almost the same cycle (22.78 yr) has been found for the depth variation of MinI and MinII. We also present an analysis of mid-eclipse time measurements of BB Peg. The analysis indicates a period decrement of $5.62{\times}10^{-8}$ day/yr, which can be interpreted in terms of mass transfer at a rate of $-4.38{\times}10^{-8}M_{\odot}$/yr, from the more to the less massive component. The O - C diagram shows a damping sine wave covering two different cycles of 17.0 yr and 12.87 yr with amplitudes equal to 0.0071 and 0.0013 day, respectively. These unequal durations show a non-periodicity which may be explained as a result of magnetic activity cycling variations due to star spots. The obtained characteristics are consistent with similar chromospherically active stars, when applying the Applegate's (1992) mechanism.

• 한국가시화정보학회지
• /
• 제14권1호
• /
• pp.57-61
• /
• 2016

We report a finding of fast(exceeding 2,000 K/s) heating of polydimethylsiloxane(PDMS), one of the most commonly-used microchannel materials, under cyclic loadings at high(~MHz) frequencies. A microheater was created based on the finding. The heating mechanism utilized vibration damping of sound waves, which were generated and precisely manipulated using a conventional surface acoustic wave(SAW) microfluidic system, in PDMS. The penetration depths were measured to range from $210{\mu}m$ to $1290{\mu}m$, enough to cover most microchannel heights in microfluidic systems. The energy conversion efficiency was SAW frequency-dependent and measured to be the highest at around 30 MHz. Independent actuation of each interdigital transducer(IDT) enabled independent manipulation of SAWs, permitting spatiotemporal control of temperature on the microchip. All the advantages of this microheater facilitated a two-step continuous flow polymerase chain reaction(CFPCR) to achieve the billion-fold amplification of a 134 bp DNA amplicon in less than 3 min. In addition, a technique was developed for establishing dynamic free-form temperature gradients(TGs) in PDMS as well as in gases in contact with the PDMS.