• 한국화재소방학회논문지
• /
• 제27권1호
• /
• pp.52-59
• /
• 2013

본 연구에서는 초고층 건물 화재 등 고압방수가 필요한 상황에서 방수압력을 유지하기 위하여 소방펌프차의 중계방수방법과 활용방안을 정립하고자 시험을 실시하였다. 중계 방수압력의 변화에 대하여 시험결과 소방펌프차의 방수구를 개방하고 측정하였을 경우 방수구를 폐쇄한 상태에서 측정한 결과보다 약 20 %가 감소한 것으로 나타났다. 소방활동 현장에서 보다 더 효율적으로 활용하기 위하여 소방펌프차 2대의 압력을 각각 변화시키면서 시험한 결과에서도 비슷한 효율이 나타나는 것으로 확인되었다. 현재 고압 방수능력이 있는 소방펌프차가 소방서에 배치되어 있지 않고 소방펌프의 형식승인 및 검정기술기준에서도 고압 소방펌프에 대한 규정이 없기 때문에 현재 보유하고 있는 소방차를 활용하여 초고층 화재 등 고압방수의 필요성이 있는 화재현장에 효과적으로 대응하고자 본 연구 결과를 토대로 소방차량 운영 및 활용방안을 제안한다.

• 한국방재학회:학술대회논문집
• /
• 한국방재학회 2007년도 정기총회 및 학술발표대회
• /
• pp.349-352
• /
• 2007

Asphalt overlay resurfacing techniques have been widely utilized in maintaining asphalt concrete in Korea, causing severe traffic congestions while being in construction and difference in level due to the repeated overlay. Besides on these technical difficulties, there have been financial disadvantages associated with technique, mainly because overlay method has been executed for pavements with intact foundations, which is contrary to the norm. This study is aiming to increase the expected life length of the asphalt pavement up to the endurance period, to raise the efficiency of the pavement by maximizing the social benefit and to enhance public character of the street through combining ceramics with epoxy resins, which has advantages in compatibility with the existing pavement materials, durability to abrasion and endurance. It has been expected that the adoption of new method and pavement materials to the actual work sites will develop the performance of the pavements, and to lengthen the durability of the existing materials. The other advantages of the 'thin surfacing' method could be the improved adhesiveness, waterproof, corrosion-proof and bending strength.

• 한국구조물진단유지관리공학회 논문집
• /
• 제18권3호
• /
• pp.116-124
• /
• 2014

콘크리트용 무기계 방수제는 내부 막을 형성하지 않기 때문에 무기계 방수제의 침투깊이 정량적으로 평가하기 어렵다. 그러나 무기계 방수제의 침투깊이 평가는 일관된 침투효율을 확보하는데 있어서 매우 중요한 평가지표 중 하나이다. 따라서 본 논문에서는 콘크리트용 무기계 방수제의 침투깊이 측정방법을 고안하였으며, 고안된 침투깊이 측정방법을 통하여 기존 무기계 방수제의 침투깊이를 평가하였다. 실험결과 고안된 무기계 방수제의 침투깊이 측정방법을 통하여 평가된 침투깊이는 90% 이상의 신뢰성이 있는 것으로 나타났다.

• Current Optics and Photonics
• /
• 제1권5호
• /
• pp.468-473
• /
• 2017

We determined the feasibility of a fishing camera system using an optical fiber as the fishing line by testing a power-over-fiber (POF) module and multimode optical fiber. Operation of the remote camera module (RCM) without the battery was preferred because the removal of the charging or battery replacement section enabled a waterproof single-body type design. The average efficiency of the photovoltaic power converter (PPC) in the tested POF module was 32.6% at 820 nm, and thus, a high-power laser of at least 1.27 W was required for operating the developed RCM with an electrical dissipation of 413 mW. Because the optical fiber was wound on a fishing reel, composite loss composed of bending and tensile loss occurred. To mitigate the composite loss, we employed a simple holder that showed an improvement in the composite loss of 0.38 dB to 0.8 dB, which was considerably better than the losses without the holder.

• Journal of Pharmaceutical Investigation
• /
• 제32권1호
• /
• pp.41-45
• /
• 2002

The purpose of this study is to microencapsulate a highly hygroscopic drug, pyridostigmine bromide (PB), with a waterproof wall material, in order to increase the flowability of the drug particles. Polyvinylacetaldiethylaminoacetate (AEA), Eugragit E and Eugragit RS were examined as the wall materials. Microcapsules containing PB were prepared by the evaporation technique in an acetone/liquid paraffin system using aluminum tristearate as a core material, and evaluated for drug encapsulation efficiency, surface morphology, particle size and drug dissolution. The encapsulation of PB in the wall material was almost complete. Among the wall materials examined, AEA exhibited the most excellency in shape, surface texture, flowability, size distribution of microcapsules. Above results suggest that AEA would be a potential wall material for microcapsulation of highly hygroscopic drugs, such as PB. Through microencapsulation with AEA, inconvenience of handling of PB powders encountered in the process of weighing and packing the powders to tableting die or capsule body could be greatly improved.

• 펄프종이기술
• /
• 제43권1호
• /
• pp.17-22
• /
• 2011

The conventional coated paper has many functional problems for printed RFID tag. This study was carried out in order to evaluate the effect of coating color components on conductivity of printed coated paper. It has been well known that the efficiency of printed RFID tag is influenced by surface properties of substrate. The required properties for suitable substrate of printed RFID tag are high smoothness and waterproof property. In this study high grammage base paper surface sized with PVA was used. Coated paper was manufactured with five different formulations. Types of coating pigments and dosage of latex were varied. It was obtained high smoothness and also less binder demand with clay than GCC. On the other hand, suitable surface resistance and smoothness of coated paper for RFID tag was obtained with 20% of latex. Besides it shows the possibility of using coated paper for printed RFID tag.

• 한국정밀공학회지
• /
• 제29권7호
• /
• pp.799-804
• /
• 2012

Recently micro-nano structures has widely been reported to improve the performance of waterproof, heat isolation, sound and light absorption in various fields of electric devices such as mobiles, battery, display and solar panels. A lot of micro-sized holes on the surface of thin film provide excellent sound, or heat, or light transmission efficiency more than solid film and simultaneously nano-sized protrusions around micro hole increase the hydrophobicity of the surface of thin film because of lotus leaf effects as generally known previously. In this paper new rapid fabrication process with 355 nm UV laser ablation was proposed to get micro-nano structures on the surface of thin film, which have only been observed at higher laser fluence. Developed thin micro-nano structured film was also investigated the hydrophobic property by measuring the contact angle and demonstrated the possibility to apply to water droplet separation.

• KIEAE Journal
• /
• 제16권1호
• /
• pp.37-45
• /
• 2016

Purpose: According to the characteristic of hanok public building, Planning criterion of structure, technology, efficiency, design is needed which can includes various type of new-hanok type public buildings. In this paper, we collect expert opinions to be used as a basis for developing models of New-hanok type Public Buildings. Method: This study was conducted in Research Study and expert surveys. The Part of reviewing Study looked at conception of new-hanok type public buildings model development and overview planning criterion set briefly. Expert surveys were targeted to professors and architects who are related in new-hanok type public buildings model development research. Result: In this study, we suggest improvement direction about planning criterion of new-hanok type public buildings model development based on opinions collected by expert surveys. In conclusion, first, In concept and legal status, it is necessary to adjust clearly than the term and legal status of new-hanok type. Second, various applicability is needed by using new materials and new construction method at the part of planning elements. Third, 'composed structure-convergence type' and 'composed structure-juxtaposed type' should be clearly classified or combined at the part of Setting of type. Forth, improvement on heat insulation, soundproof, waterproof efficiency is demanded to roof, wall, window systems. Fifth, arranging revitalization plan is important.

• 분석과학
• /
• 제11권2호
• /
• pp.79-87
• /
• 1998

최근의 소비자들은 waterproof 기능을 가진 광범위한 UV 차단 제품을 선호하며, 피부 안전성에도 많은 관심을 가지고 있다. NR method로 세포 자극성(in-vitro)을 실험한 결과, UV-B의 자외선 차단제들은 0.08 w/v% 이상에서 세포의 생존율이 떨어졌고, UV-A의 자외선 차단제들은 0.06 w/v% 이상에서 세포의 생존율이 떨어졌다. 무기 자외선 차단제들의 patch-test는 각각 10.5와 11.25 이하로 피부에 자극성은 없었다. UV 흡수 곡선, UV-B는 octyl methoxycinnamate(OMC), UV-A는 butyl methoxy dibenzoylmethane(BMDM) 가장 적합하였다. 따라서, 유기 자외선 차단제는 OMC와 BMDM이 nylon과 polyethylene에 코팅된 원료인 $Nylonpoly^{TM}$ UVA/UVB을 사용하였다. 무기 자외선 차단제는 zinc oxide(ZnO)와 titanium dioxide($TiO_2$)를 사용하였다. ZnO와 $TiO_2$의 혼합 비율은 6:4가 적당하였다. 총 UV차단제의 함량은 ZnO 6%, $TiO_2$ 4%와 $Nylonpoly^{TM}$ UVA/UVB 5%를 썬 스크린 크림에 혼합하였다. In-vi-tro의 SPF값은 38.9이었다. 응용으로, 동일 함량을 넣은 O/W type과 W/S type의 썬 스크린 크림을 만들어 시간 경과에 따른 SPF를 측정한 결과, SPF가 O/W type보다 W/S type이 5배 이상 오래 지속되었다. 이것은 해수욕, 등산, 스키를 탈 경우에 효과적이다. 본 연구는 자외선 차단제의 피부 트러블을 최소화하고자 하였으며, 매끄러움성, 피부 안전성과 자외선 차단 효과가 우수한 화장품이라고 생각되어진다.

• 대한토목학회논문집
• /
• 제30권2A호
• /
• pp.169-176
• /
• 2010

일반적으로 폴리우레아는 부착성능, 신장률, 투수 저항성이 매우 높아서 구조물의 방수 코팅재료로 많이 사용되고 있다. 또한, 스프레이건을 이용하여 쉽고 빠르게 작업이 가능하며, 약 30초 이내에 경화가 되기 때문에 시공성도 매우 뛰어나 우수한 기능성 재료로 각광받고 있다. 그러나, 건설산업에서 폴리우레아는 대부분이 방수코팅재료로 사용되고 있으며, 구조물의 성능을 향상시키는 보강재로 사용하기 위한 연구는 전무하다. 따라서, 본 연구는 폴리우레아를 일반 구조물의 보강재로 사용하기 위한 기초적인 연구로 폴리우레아의 구성성분의 변화에 따른 영향을 파악하고자 한다. 또한, 개발된 폴리우레아의 구조 보강성능을 확인하기 위하여, RC 보와 슬래브를 제작하여 휨 성능 실험을 수행하였다. 실험 결과, 폴리우레아는 콘크리트 시험체와 일체거동을 보이며, 연성과 강성이 상승하는 것으로 나타났다. 그러나, 섬유시트와 폴리우레아로 2중 보강한 시편은 오히려 섬유시트만으로 보강한 시편보다 낮은 성능을 보이는 것으로 나타났다.