• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.20 no.4
• /
• pp.274-279
• /
• 2008

In the perspective of saving energy in buildings, high performance of insulation and air tightness for improving the heating and the cooling efficiency has brought the positive effect in an economical view. However, these building energy saving technologies cause the lack of ventilation, which is the direct cause of increasing the indoor contaminants, and it is also very harmful to residents because they spend over 90% of their time in the indoor area. Therefore, the ventilation is important to keep indoor environment clean and it can also save energy consumption. In this study, a HEPA type breathing wall is designed as a passive ventilation system to collect airborne particles and to supply fresh outdoor air. To make fine porous structures, polymer nano fibers which were made by electro spinning method are used as a precursor. The nano fibers are coated with SiO2 nano particles and finally the HEPA type breathing wall is made by sintering in the electric furnace at $300\sim500^{\circ}C$. The pressure drops of nano ceramic structure are 8.2, 25.5 and 44.9 mmAq at the face velocity of 2.0, 5.9 and 8.8 cm/s, respectively. Also the water vapor permeability is $3.6g/m^2{\cdot}h{\cdot}mmHg$. In this research, the porous nano ceramic structures are obtained and the possibility for the usage of a material for HEPA type breathing wall can be obtained.

• Food Science and Preservation
• /
• v.16 no.1
• /
• pp.134-137
• /
• 2009

The gelatin film containing grapefruit seed extract (GSE) was prepared by incorporating different amounts (0, 0.02, 0.05, 0.08, 0.1%) of GSE into the film. The tensile strength (TS) of the film increased by the addition of GSE, and water vapor permeability (WVP) of the film decreased. In particular, the gelatin film containing 0.1% GSE had a TS of 10.28 MPa, while the control had 8.68 MPa. WVP of the film containing 0.1% GSE decreased to 2.18 ng m/m2 s Pa, compared to 2.48 ng $m/m^{2}s$ Pa of the control. In addition, incorporation of 0.1% GSE to the gelatin film decreased the populations of Escherichia coli O157:H7 and Listeria monocytogenes by 2.67 and 3.15 log CFU/g, respectively, compared to the control. These results suggest that as a packaging material, gelatin film containing GSE can have antimicrobial activity against pathogenic microorganisms in foods.

• Korean Journal of Food Science and Technology
• /
• v.47 no.2
• /
• pp.224-232
• /
• 2015

The effects of cold plasma (CP) treatments on the physicochemical and biodegradable properties of a corn biomass-containing polyester (CBPE) film were studied. The CBPE film was treated with CP generated by $N_2$, $O_2$, He, Ar, or dry air at 400-900 W and 667 Pa for 10-40 min. The glass transition temperature of the CBPE film ($-30.2--28.6^{\circ}C$) was not affected by the CP treatment, while the elastic modulus and water vapor permeability decreased (p<0.05). The ink printability was improved by the treatment and the improved printability was maintained during storage for 56 days at room temperature. Roughness of the film increased after treatments and the level of roughness appeared to increase during storage. Heat and microbial biodegradability of the CBPE film was improved by the air-CP treatment (p<0.05). These results have demonstrated the potential of applying CP treatments to improve the flexibility, printability, and biodegradability of CBPE films.

• Korean Journal of Food Science and Technology
• /
• v.44 no.6
• /
• pp.711-715
• /
• 2012

A laminate-composite film was developed using industry co-products of defatted mustard meal (DMM) and whey protein isolate (WPI). An individually prepared DMM-based film (DMM film) and a WPI-based film (WPI film) were thermally laminated at $130^{\circ}C$ at a rate of 30 cm/min. Microscopic images exhibited that the DMM film and the WPI film were continuously attached in the laminate without void spaces. The tensile strength, elongation at break, and water vapor permeability for the laminate were 0.7MPa, 4.0%, and $6.9g{\cdot}mm/kPa/h/m^2$, respectively. Stretchability and heat seal strength of the laminate were higher than those of the un-laminated DMM film. The film layers of the laminate were physically overlapped, not forming new biopolymer units induced by molecular interactions. The opportunity for DMM films to be used as food packaging materials for wrapping and sealing could be increased by thermal lamination with WPI films, which improves the stretchability and heat sealability of DMM films.

• Journal of Microbiology and Biotechnology
• /
• v.16 no.4
• /
• pp.597-604
• /
• 2006

In order to extend the shelf-life of packaged or coated foods, an antibacterial edible film containing 1.8% of BLS was developed from the defatted corn germ meal, which had been fermented with Bacillus subtilis under the optimum condition of pH 7.0-7.5 and $33^{\circ}C$ for 33 h. Water vapor permeability of the fermented film $(88.3mg/cm^2\;h)$ was higher than those of the normal corn germ films $(75.8mg/cm^2\;h)$. Protein solubility of the fermented film was also higher than ordinary corn germ film at the pH range of 3-10. The fermented corn germ film had higher tensile strength and lower % elongation (elongation rate) than the ordinary corn germ film. The antimicrobial activity of the film was more than 50% of the maximum activity after film production with heat treatment at $90^{\circ}C$ and pH adjustment to 9. When the corn germ protein film with bacteriocin-like substance was applied on the mashed sausage media containing E. coli, the bacterial growth inhibition was higher than the ordinary corn protein film.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.41 no.9
• /
• pp.1274-1280
• /
• 2012

Defatted grape seed meal protein (DGP) was extracted, and DGP films containing various plasticizers were prepared. To improve the mechanical properties of DGP film, nanoclay or gelatin was incorporated in the film-forming solution to manufacture DGP composite films. Among the plasticizers of fructose (FRU), sucrose (SUC), and polypropylene glycol (PPG), DGP film containing a SUC : PPG ratio of 2.5:0.5 exhibited the best film-forming ability. Addition of Cloisite $Na^+$ improved the mechanical properties of DGP film. Tensile strength (TS) and elongation at break (E) of the film containing 5% Cloisite $Na^+$ were 1.45 MPa and 71.97%, respectively. Regarding the DGP/gelatin composite films, TS and water vapor permeability (WVP) increased with increasing gelatin amount, whereas E decreased. In particular, the DGP/gelatin (2:2) composite film exhibited 20.95 MPa TS and 12.25% E. These results suggest that the DGP film prepared from defatted grape seed meal can be used as a food packaging material.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.9 no.1
• /
• pp.33-54
• /
• 2003

The aim of this study was to develop a model that could be used in the design of modified atmosphere packaging (MAP) for peaches. Respiratory data at 5, 10, $20^{\circ}C$ for peaches were gathered and altered for create useful respiration model. Packaging materials were conventional low density polyethylene and polypropylene with anti-fog, and anti-fungi treatments, and thickness was $30{\mu}m$ and $50{\mu}m$ each. Permeability tests were performed to find their oxygen, carbon dioxide, water vapor transmission rate as increases in temperature. Test results were then converted to logarithm format for MAP modeling. The maximum rate of oxygen uptake increased with increasing temperature. Optimum gas composition in the package system for fruits were set according to literature and upper or lower limits of oxygen and dioxide established. To predict gas composition at certain storage time, weight of fruits, film thickness, film type, and other variables, respiration rate was studied at various storage conditions. The results of tests were used to calculate Cameron's model and converted to a cubic estimation equation. The validity of the model was tested experimentally by observing actual atmospheric changes inside packages. This result of study may be useful for designing dynamic gas exchange MAP systems for similar agricultural products.

• Korean Journal of Food Science and Technology
• /
• v.30 no.4
• /
• pp.855-861
• /
• 1998

Composite films based on ${\kappa}-carrageenan$ and chitosan were prepared, and tensile strength (TS), elongation (E), and water vapor permeability (WVP) of the films were measured. The molecular weight of ${\kappa}-carrageenan$ and chitosan was measured by a light-scattering instrument and was $5.1{\times}10^5,{\;}and{\;}1.71{\times}10^5$, respectively. TS of ${\kappa}-carrageenan$ and chitosan free film was 30.2 MPa and 21.0 MPa, respectively. TS of composite film was not related to the amount of the ascorbic acid. E of composite film was lower than those of the free films of ${\kappa}-carrageenan$ and chitosan. WVP of composite film was lower than that of chitosan film and was similar to WVP of ${\kappa}-carrageenan$ film.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.32 no.5
• /
• pp.664-668
• /
• 1999

The extracting conditions of alginates from sea tangle were evaluated by measuring water vapor permeability (WVP) and tensile properties of alginate film to obtain basic data of making an edible and biodegradable film. The alginates were extracted with $1\%,\;3\%$ and $5\%$ sodium carbonate ($Na_2CO_3$) for 1, 3, 5 and 10 hours, and the alginate film was made with various plasticizers. The higher concentration of $Na_2CO_3$ solution showed the lower viscosity and polymerization degree of alginate and the film prepared with alginates having low viscosity showed the higher WVP. The extracting hours had little effect on the WVP and the elongation of alginate film, but the polymerization degree of alginates directly affected the tensile strength of the film. The addition of sorbitol and polyethylene glycol as a plasticizer lowered the WVPs and the elongation of alginate film.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.11 no.2
• /
• pp.155-163
• /
• 2007

High Strength Concrete (HSC) has weakness that in a fire, it is spalled and brittles. The phenomenon of spalling is made by water vapor's (resulting from evaporation in the material at over $100{^{\circ}C}$)' being confined in watertight concrete. As the concrete strength increases, the degree of damage caused by the spalling becomes more serious because of the permeability. It is reported that the polypropylene(PP) fiber has an important role in protecting concrete from spalling and the optimum dosage of PP fiber is 0.2%. This study was conducted on the nonreinforced concrete specimens. The high-temperature behavior of high-strength reinforced concrete columns with various concrete strength and various dosage of PP fibers was investigated in this study. The results show that the ratio of unstressed residual strength of columns increases as the concrete strength increases and the ratio of unstressed residual strength of columns increases as the dosage of PP fiber increases from 0% to 0.2%, however, the effect of fiber dosage on residual strength of column barely changes above 0.2%.