• Elastomers and Composites
• /
• 제48권4호
• /
• pp.294-299
• /
• 2013

수용성 단량체인 메타크릴산 (MAA)을 단량체로 potassium persulfate (KPS)를 개시제로 이용하여 $70^{\circ}C$에서 $90^{\circ}C$ 사이의 선택된 온도에서 용액중합을 진행하였다. 물에 대한 메타크릴산의 농도가 감소하거나 개시제의 농도가 증가하면 분자량은 감소하였다. 중합반응온도는 폴리메타크릴산 (PMAA)의 분자량에 크게 영향을 미치지 않았다. Weissenberg 효과는 대부분의 반응온도에서 나타났으며, $90^{\circ}C$에서는 약하게 관찰되었다. 대부분의 중합반응에서 분산성지수는 1.5 이하로 관찰되었다. 교반속도가 증가하면서 분자량은 점진적으로 증가하다, 교반속도가 800 rpm에 이르면서 수평균 및 중량평균분자량이 동일하게 791,000 g/mol의 분자량을 갖는 단분산성의 PMAA가 구하여졌다. 유리전이온도는 $162^{\circ}C$로 측정되었다.

• Journal of Pharmaceutical Investigation
• /
• 제20권1호
• /
• pp.13-18
• /
• 1990

Hydrocortisone (HC) sustained-release suppositories were prepared by using a solid matrix of methacrylic acid-methacrylic acid methyl ester copolymer $(Eudragit\;L_{100}^{R}:\;EL)$ as a poorly water soluble carrier and polyethylene glycole 1540 (PEG) as an water soluble carrier. HC release rate was controlled by complexation with ${\beta}-cyclodextrin$ $({\beta}-CyD)$ which was confirmed by X-ray diffractometry, IR-spectroscopy and differential scanning calorimetry. Release rate of HC from the EL-PEG matrix suppositories decreased with increase of EL contents. The release rale from $HC-{\beta}-CyD$ complex decreased in the following order: $HC-{\beta}-CyD/PEG$ > HC/PEG > $HC-{\beta}-CyD/EL_{10%}-PEG$ > $HC/EL_{10%}-PEG$ > $HC-{\beta}-CyD/EL_{15%}-PEG$ > $HC/EL_{15%}-PEG$ > $HC-{\beta}-CyD/EL_{20%}-PEG$ > $HC/EL_{20%}-PEG$. The crystallinity of HC in polymer matrix was identified using X-ray diffractometer and the surface of matrix suppositories after release test was examined by scanning electron microscopy. The sustained release of HC from these matrix suppositories was attributed to the network structure of EL.

• 대한화학회지
• /
• 제53권5호
• /
• pp.547-552
• /
• 2009

천연고분자물질인 키토산은 생체적합성과 생체활성이 좋은 특성을 가지고 있기 때문에 생체 의료용 재료로 중요하게 다루어지고 있다. 본 연구는 수용성 키토산을 교차결합제인 EGDMA (ethylene glycol dimethacrylate)와 HEMA (2-hydroxyethyl methacrylate), MMA (methylmethacrylate), MA (methacrylic Acid) 그리고 개시제인 AIBN을 사용하여 공중합 하였다. 공중합한 안의료용 재료의 물리적 특성을 측 정한 결과 함수율 24$\sim$59%, 가시광선 투과율 88$\sim$89%, 인장강도 0.1$\sim$2.4 Kgf를 나타내었다. 또한 포도 상구균, 녹농균에 대한 항균성 시험 결과 키토산을 포함하지 않은 고분자에 비해 높은 항균성을 나타내 어 향후 이 공중합체가 고기능성을 가진 안의료용 재료로 사용될 수 있을 것으로 기대된다.

• Bulletin of the Korean Chemical Society
• /
• 제14권5호
• /
• pp.574-578
• /
• 1993

Laser-induced photoacoustic spectroscopy (LIPAS), which utilizes the photothermal effect that results from nonradiative relaxation of excited state molecules, was used in the speciation analysis of the complexes of neodymium(III) and water soluble synthetic polyelectrolyte, poly methacrylic acid (PMAA), in 0.1 M $NaClO_4$ at pH of 6.0. The minimum detection limit of Nd(III) by LIPAS was $5.O{\times}10^{-6}$ M. Experiment was carried out at low concentration ratio of Nd(III) to PMAA to assure that 1 : 1 complexes predominate. The bound and free Nd(III) species were characterized by measuring nonradiative relaxation energy of the excited states $(^2GM{7/2}\;and\;^4G_{5/2})$ to the metastable state $(^4G_{3/2})$. Two species were quantified by deconvolution of the mixed spectrum using their respective reference spectra. The conditional stability constant measured by LIPAS was 5.52 L$mol^{-1}$.

• 펄프종이기술
• /
• 제29권3호
• /
• pp.17-25
• /
• 1997

Natural water-soluble polymers such as starch, casein and carboxy methyl cellulose(CMC) have been limited in their uses. However, the proper water retention of coating colors can not be obtained without addition of these polymers. Furthermore, the coating runnability and the physical properties of coated paper were not also satisfied. Therefore, the objective of this study was to synthesize the water retention and flow modifiers which can improve the water retention and flow properties of coating colors. We have measured physical properties of flow modifiers and coating colors which included flow modifiers. The viscosity of flow modifiers was very low at acid pH, and rapidly increased at about pH 7, and gradually reached to equilibrium at alkali pH. Such an increase comes from the molecular weight of flow modifiers and the amount of acrylic and methacrylic acids. The viscosity of coating color containing the flow modifiers was lower than that containing CMC. However, both of them had little difference in water retention. The water-phase viscosity of synthetic modifier containing coating color was either higher or similar compared to that of CMC containing coating color. The high shear viscosity of coating colors was low. Therefore, it can be concluded that the synthetic flow modifiers are very useful for improvement of flow properties and water retentions.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2003년도 추계학술발표회
• /
• pp.293-297
• /
• 2003

A series of laboratory experiments was conducted to investigate the fixation characteristics of poly(vinylalcohol)-poly(methacrylic acid)(PVA-PMAA) mixed solution on the soluble (equation omitted)-radionuclides. Using the potentiometric titration technique, it was found out that the PVA and PMAA in a solution form intermacromolecular complex. The mobilized portion of each radionuclide by water from sand surface treated with a fixative was measured by ${\gamma}$-ray spectroscopy, The mobilized portion of minor radionuclides such as $^{241}$ Am, $^{154}$ Eu, $^{155}$ Eu and $^{144}$ Ce were higher than those of $^{134}$ Cs and $^{137}$ Cs. The capability of PVA-PMAA system was better among the candidate solutions for the fixation of total (equation omitted)-radioactivity, $^{134,137}$Cs which is composed of more than 85 % of total ${\gamma}$-radioactivity could be fixed effectively by the PVA-PMAA solution.

• Nuclear Engineering and Technology
• /
• 제32권3호
• /
• pp.205-213
• /
• 2000

A series of laboratory experiments was conducted to investigate the fixation characteristics of poly(vinylalcohol)-poly(methacrylic acid)(PVA-PMAA) mixed solution on the soluble ${\gamma}$- radionuclides. Using the potentiometric titration technique, it was found out that the PVA and PMAA in a solution form intermacromolecular complex. The mobilized portion of each radionuclide by water from sand surface treated with a fixative was measured by ${\gamma}$-ray spectroscopy. The mobilized portion of minor radionuclides such as 241Am, 154Eu, 155Eu and 144Ce were higher than those of 134Cs and 137Cs. The capability of PVA-PMAA system was better among the candidate solutions for the fixation of total ${\gamma}$-radioactivity. 134,137Cs which is composed of more than 85 % of total ${\gamma}$-radioactivity could be fixed effectively by the PVA-PMAA solution.

• 폴리머
• /
• 제33권1호
• /
• pp.45-51
• /
• 2009

BA와 MMA 그리고 1$\sim$5 wt%/monomer의 다양한 관능성 단량체(AA, 2-HEMA, GMA, AAm)를 사용하여 수용성 아크릴계 점착제를 중합하였다. 점착박리강도를 향상시키기 위해 대기압 평판형 플라즈마 전처리 방식을 피착제에 사용하였다. 관능성 단량체 종류에 따라 AA>2-HEMA>GMA>AAm의 순으로 높은 점착박리강도를 나타내었다. 유지력은 관능성 단량체의 함량이 증가함에 따라 열적 성질이 증가하여 전체적으로 AA>AAm>GMA>2-HEMA순으로 우수한 유지력을 나타내었다. 피착면에 평판형 플라즈마 전처리 방식을 적용한 결과 AA 9.1%, 2-HEMA 9.4%, GMA 9.4%, AAm 1.8%의 후기점착박리강도 증가를 확인할 수 있었다. 결론적으로, 다양한 관능성 단량체와 플라즈마 표면 처리법을 사용하여 점착박리강도, 유지력과 같은 기계적 물성을 조절할 수 있었다.

• Bulletin of the Korean Chemical Society
• /
• 제7권2호
• /
• pp.137-142
• /
• 1986

The luminescence spectra of $Ru(bpy)_3^{2+}$ in poly(methacrylic acid) (PMA) solutions varied sensitively with pH. At pH < 5.5, the emission intensity increased with pH up to 4 times, while it decreased with pH beyond the pH. The enhanced emission intensity was accompanied by blue-shift of the emission maxima as much as 15 nm. The enhancement of emission intensity was attributed to the restricted rotational mobility of ligand of the cation bound to densely coiled PMA molecules at pH < 5.5. The sharp decrease in emission intensity with increasing pH near pH 5.6 was accounted for conformational transition of the polymer to more extended structure, which was also revealed in viscosity measurement. The enhancement of emission intensity became higher as NaCl concentration of the solution increased. The binding constant of $Ru(bpy)_3^{2+}$ with two carboxylate groups of PMA was calculated as $2{\times}10^5\;M^{-1}$ in 0.1 M NaCl at pH 5.2. The pH dependence of luminescence quenching rate of $Ru(bpy)_3^{2+}$ by $Cu^{++}$ also showed maximum near pH 5, and the rate was more than $10^3$ times higher than that in water, whereas the maximum enhancement of quenching rate (about 20 times) in poly(acrylic acid) (PAA) solution occurred at pH 4.5. On the other hand, the pH dependence for neutral water soluble nitrobenzene (NB) exhibited opposite trend to that of $Cu^{++}$. The quenching constant vs pH curve for $MV^{++}$ was composite of those for $Cu^{++}$ and NB. The anomalous high quenching rate for $Cu^{++}$ in PMA solution at pH < 5.5 was attributed to the binding of $Ru(bpy)_3^{2+}$ and $Cu^{++}$ to the same region of PMA, when it conforms densely coiled structure in the pH range. The observation of mininium quenching rate for NB near pH 5.5 indicated that the $Ru(bpy)_3^{2+}$ bound to the densely coiled PMA is not accessible by NB, which is in bulk water phase. The composite nature of the pH dependence of quenching rate for $MV^{++}$ in PMA solution was attributed to the smaller binding affinity of the cation to PMA, compared to that of $Cu^{++}$. The sharp, cooperative conformational transition with pH observed in PMA was not revealed in PAA. But, the pH dependence of quenching rates in this polymer reflected increased charge density and, thus, binding of cations to the polymer, and expansion of the polymer chain with pH.