• 한국물환경학회지
• /
• 제27권3호
• /
• pp.334-341
• /
• 2011

The free residual chlorine of tap water samples, collected from 266 faucets on the water pipe network in Daegu City, was between 0.1 and 0.79 mg/L. On microorganic tests, general bacteria and the coliform goup were not detected and thus the tap water was turned out to be fit to drink. In particular, samples of which free residual chlorine was 0.1 mg/L and over were cultured in R2A agar media at $25^{\circ}C$ for 7 days, and as a result heterotrophic bacteria were detected in 65.9% of samples; (1). The closer tap water got to the faucet from the stilling basin, the lower residual chlorine concentration became but the more the bacterial count became. And, more bacteria were detected in the R2A agar medium than in the PCA medium. (2). In the case of separated strains, most colonies were reddish or yellowish. 16S rRNA sequence was identified as Methylobacterium sp. and Williamsia sp., and yellow strain was identified as Sphingomonas sp., Sphingobium sp., Novosphingobium sp., Blastomonas sp., Rhodococcus sp. and Microbacterium sp. White strain was identified as Staphylococcus sp. (3). Sterilized tap water in polyethylene bottles was inoculated with separated strain and was left as it was for 2 months. As a result, bio-film was observed in tap water inoculated with Methylobacterium sp. and Sphingomonas sp. It was found that heterotrophic bacteria increased when free residual chlorine was removed from tap water in the water pipe network. Thus, there is a need to determine a base value for heterotrophic bacteria in order to check the cleanliness of tap water in the water pipe network.

• Korea Journal of Cosmetic Science
• /
• 제2권1호
• /
• pp.21-31
• /
• 2020

The aim of this study is to develop a sunscreen stick formulation technology with excellent water resistance and washability. Consumers' needs for sunscreen products are diversifying. Water resistance and ease of washing are both important factors in sunscreen products. However, it is difficult to develop a sunscreen formulation that satisfies these two factors at the same time, because these two elements are in conflict. Fatty acid has a hydrophobic property against the water with low or neutral pH, but when it contacts with soapy water which has high pH, saponification occurs and the fatty acids become surfactants and can be dispersed in the water. Using the reaction characteristics of fatty acids, we can make sunscreen that is highly resistant to water or sweat, but is only selectively removed from soapy water. We found that the sunscreen stick containing fatty acids had better water resistance and washability than the sunscreen sticks without fatty acid. The sunscreen stick containing fatty acids showed a tendency to improve water resistance by scattering ultraviolet rays of long wavelength area by forming insoluble precipitation with divalent ions in tap water after immersion. In addition, an increase in the fatty acid content tended to also increase the ease of cleaning the sunscreen stick. Solid fatty acid was advantageous in improving water resistance than liquid fatty acid, but there was no difference between solid fatty acids and liquid fatty acid in washability. When it comes to stability, the sunscreen stick using liquid fatty acids maintained a high hardness and melting point, and showed no sweating. Based on this study, it is possible to develop an easy washable sunscreen stick formulation technology that has excellent water resistance but is selectively removed only in soapy water.

• KIEAE Journal
• /
• 제16권6호
• /
• pp.77-82
• /
• 2016

Purpose: Almost every research carried out in our country against the natural disaster is focused on the temporary facilities such as temporary housing, emergency shelter and as a result, it is very hard to find out researches on the ordinary houses which installed integrated systems of hazard-resistant against the natural disaster. Method: To conduct this research, categorizing process for design, structural, environmental and installation elements found in the Hazard-Resistant and Reduction House built for sale in Japan was performed. Result: In this study, several design concepts and subordinate items are recommended for hazard-resistant housing. First, design concept of 'Preparedness' which means security and access to the storage storing goods especially food & beverage for the emergencies is needed. The subordinate items consist of security of stocking space, diversified and circular storage system, and safety storage system. Second, design concept of 'Security' which means security of physical safety space and rapid recovery to returning to daily life against natural disaster is needed. The subordinate items consist of many items including not only structure and facilities but also architectural design method. And finally, design concept of 'Maintenance, Support and Return' which means minimizing the physical and psychological damages and support safety and physical conditions of the victims from the impact of the disaster to returning to daily life is needed. The subordinate items consist of high efficiency insulation/airtightness design, microclimate design, combination of photovoltaic system and storage battery, non-power appliance system against the power failure, storing system for drinking water, rainwater storing and utilization system.

• 한국자원식물학회지
• /
• 제31권6호
• /
• pp.719-724
• /
• 2018

Methicillin-resistant Staphylococcus aureus (MRSA) is a bacterium responsible for a number of infections in humans that are difficult to treat, and as a result, is a substantial contributor to morbidity and mortality. In the present study, in search of natural products capable of inhibiting this multidrug-resistant bacterium, we investigated the antimicrobial activity of Lysimachia clethroides Duby root. The antibacterial activities of EtOH extract of Lysimachia clethroides Duby root and its n-hexane, EtOAc, n-BuOH and water fractions were evaluated against 15 strains of methicillin-resistant staphylococcus aureus (MRSA) and 1 standard methicillin-susceptible S. aureus (MSSA) strain by using the minimal inhibitory concentrations (MICs) assay, colorimetric assay using MTT test, checkerboard dilution test. Antimicrobial activity of n-hexane fraction of Lysimachia clethroides Duby root was remarkable. Against the 16 strains, the minimum inhibitory concentrations (MICs) were in the range of $31.25-62.5{\mu}g/ml$ and FICI values for n-hexane fraction of Lysimachia clethroides Duby root+AM and n-hexane fraction of Lysimachia clethroides Duby root+OX were checkerboard method performed using the MRSA, MSSA and one clinical isolate strains via MICI 0.12-1 and 0.25-0.75, showing the increase of synergistic effect. When combined together, these antibiotic effects were dramatically increased. These effective combinations could be new promising agents in the management of MRSA.

• Journal of Welding and Joining
• /
• 제32권5호
• /
• pp.21-25
• /
• 2014

Oil and gas fields were left unexploited which deemed too deep and sour. New developing markets are emerging in this part and pipe manufacturers need demanding requirements in the combination of sour service requirements with heavier wall thickness required to cope with increasing water depths. Whilst, the strength and fracture toughness needed to meet the strict requirements In order to deliver the optimum sour properties in the final pipe, attention needs to be paid to each stage throughout the process from steel making. The main key during steel making is strengthening, securing mechanical properties and suppression of center segregation by adding proper chemical elements and controlling water cooling and plate rolling. Additionally in welding, it is required to prevent HAZ softening by high heat input during welding of heavy thick pipes and hydrogen assisted cracking in high strength steels with hard phases. In this paper, we introduce markets of sour resistant linepipe steels and in response to this, have a look in the development trend of sour resistant linepipe steels and its sour characteristics in welded joints.

• 한국식품위생안전성학회지
• /
• 제13권4호
• /
• pp.412-418
• /
• 1998

It was perfomed to investigate for Yersinia species from 2,841 spring waters in Seoul, from 1994 to 1998. Of them, Yersinia spp. were isolated 86 isolated (3.3%). Of 86, sixty two isolates(71.1%) were Yesinia enterocolitica, followed by Y. aldovae (11 strains), Y. pseudotuberculosis (5 strains), Y. frederiksenii (3 strains), unclassified Yersinia spp. (5 strains). Yersinia spp. were highest isolated from Nowon-Gu (22 samples asd Bukhan Mountain Park isolated(18 samples). We tested 1.186 samples for SPC and colifrom from 1996 to 1998. of these tests, the positive rate of coliform was 23.6%, SPC, 9.1%, and either coliform of SPC positive 27.1%. The positive rates of coliform and SPC were decreased 26.7%, 12.7% in 1996, 25.8%, 6.3% in 1997 and 18.1%, 7.6% in 1998 , rerspectively. Of Y. enterocolitica, 78% was resistant to ampicillin and carbenicillin. In the case of Y. aldovae, only 3 of 11 isolated were resistant to carbenicillin. Y. pseudotuberculosis were resistant to colistin. Also Y. frederiksenii to carbenicillin. There were many spring waters of Y. enterocolitical isolated from Nowon-Gu and Buk-han Mountain Park. So, it needs to clean the environment of those regions.

• Preventive Nutrition and Food Science
• /
• 제4권4호
• /
• pp.215-220
• /
• 1999

The Physical properties of corn starch were investigated by scanning electron microscopy, X-ray diffractometry and differential scanning calorimetry during the formation of enzyme-resistant starch(RS). Samples were studied in their native states and after annealing at 50, 55, 60 and 65℃ in excess water(starch : water=1:3) for 48hr. Starch granules became smaller and more rounded after annealing than in their native state. Annealing did not change the X-ray profile of native corn starch. After autoclaving-cooling cycles, native starch lost most of its crystallinity but annealed ones showed some of their crystallinity left as diffuse or poor B-type, which didn't relate to increasing Rs yields. During formation of RS, however, both native and annealed starches changed their X-ray profile from A-type to poor B-type of retrograded amylose. Annealing caused an increase in gelatinization temperature and enthalpy, but a narrowing of gelatinization temperature range. Only starch annealed at 65℃, however, showed a decrease in enthalpy even though its gelatinization temperature increased, which appeared to be due to the partial gelatinization in the amorphous region during annealing. Peak height index(PHI), the ratio of ΔH to Ti-To, increased by annealing. PHI values, therefore, showed the possibility as an indicator to predict RS yield which cannot be differentiated by differential scanning calorimetry and X-ray diffraction data.

• 소성∙가공
• /
• 제30권2호
• /
• pp.91-98
• /
• 2021

The present study deals with the microstructure and mechanical properties of 700 MPa-grade high-strength seismic resistant reinforced steel bars fabricated by various TempCore process conditions. For the steel bars, in the surface region tempered martensite was formed by water cooling and subsequent self-tempering during TempCore process, while in the center region there was ferrite-pearlite or bainite microstructure. The steel bar fabricated by the highest water flow and the lowest equalizing temperature had the highest hardness in all regions due to the relatively fine microstructure of tempered martensite and bainite. In addition, the steel bar having finer microstructures as well as the high fraction of tempered martensite in the surface region showed the highest yield and tensile strengths. The presence of vanadium precipitates and the high fraction of ferrite contributed to the improvement of seismic resistance such as high tensile-to-yield strength ratio and high uniform elongation.

• Corrosion Science and Technology
• /
• 제21권5호
• /
• pp.390-411
• /
• 2022

Any design engineer or coating formulator's primary objective is to protect metals. Large investments in terms of money, time, labour, and other resources are necessary for constructing large-scale machinery and structures. In terms of economy, the structure's lifespan should be as long as feasible to create revenue. It is becoming essential to protect metal substrates from corrosion to prolong the lifespan of such huge structures. One of the most exciting, durable, useful, and effective methods to protect metals from corrosion is the application of corrosion-resistant coating. Graphene is a novel material with a wide range of applications because of its extraordinary features. The use of graphene in coating creates an obstacle and complicates the path for corrosive medium to reach the metal. As the path to the metal elongates, the corrosion medium takes longer to reach the metal. Thus, metal corrosion can be avoided. In this paper, the importance of graphene in coating formulation is discussed, including chemical modifications of graphene, the effect of graphene concentration on corrosion inhibition, and the contact angle of coating. This review also highlights the significance of water-based corrosion-resistant coating for preventing environmental damage.

• 한국환경보건학회지
• /
• 제24권1호
• /
• pp.141-150
• /
• 1998

This study was performed to investigate the distribution of Yersiniae and correlation between Yersiniae and indicator organism by time and area in spring water located in northern part of Seoul. Samples collected from 46 spring waters located in four mountains(Dobong, Bukhan, Surak, Bulam) were inspected to detect Yersiniae and indicator organisms. And also there were examined bioserological characteristics and resistance of ahtibiotics of the isolated Yersiniae.The result were as follows. 1. The isolation rate of Yersiniae was 22% in February and 20% in April. The isolated species were 6 strains of Y. enterocolitica, 6 strains of Y. aldova, 4 strains of Y. intermedia and 43 strains of Y. pseudotuberculosis. The serotype of Y. pseudotuberculosis isolated from was all O:5 and biotype of Y. enterocolitica isolated from was all O:3. 2. The Geometric mean of standard plate count, coliform, and psychrotrophilic bacteria were 3.4 CFU/ml, 1.2 MPN/100 ml and 33.0 CFU/ml in February and 3.1 CFU/ml, 1.5 MPN/100 ml and 20.5 CFU/ml in April respectively. There was no significant difference by time and area but the indicator organisms were correlated significantly with each other (p<0.05). 3. Because detection of Yersiniae was not statistically associated with indicator organism, Yersiniae can be detected in the spring water approved microbiologically (p<0.05). 4. The Yersiniae isolated were resistant to Ampicillin, Colistin, Carbenicillin and Coilstin. All isolaed Y. enterocolitica were resistant to Ampicillin (100%). In the case of Y. pseudotuberculosis, only 1 of 3 isolated was resistant to Colistin but susceptible to other antibiotics.