• Journal of Korea Port Economic Association
• /
• v.23 no.4
• /
• pp.71-90
• /
• 2007

To induce container cargos to Gunsan port, we should struggle on securing the quantity of goods transported from the competitive Jeonbuk and Chungcheong areas by reducing transportation expenses by land, and make an activating plan for the international exchange between Gunsan port and nearby ports in China. As a result, if the plan to induce container cargos to Gunsan port is activated, the regular liners will stop at Gusan port. So the new sea route will be opened so that consignors can ship cargos in the proper time. The consignors will use Gunsan port frequently because of the reduction of distribution expenses. To do so, for the first, many incentives should be implemented to attract container cargos. In addition, various facilities should be fully equipped and improved. This paper is to improve the problems for which consignors, the shipping lines and forwarders may feel uncomfortable when they use Gunsan port. According to the research on the actual condition, the biggest problem in Gunsan port is the depth of water. The management, relation system, infrastructure and information system of Gunsan port are also insufficient. Therefore, this paper will make an alternative plan to improve these problems and help the container cargos induce to Gunsan port.

• Nuclear Engineering and Technology
• /
• v.38 no.2
• /
• pp.163-174
• /
• 2006

The $Ph{\acute{e}}bus$ FP project is an international reactor safety project. Its main objective is to study the release, transport and retention of fission products in a severe accident of a light water reactor (LWR). The FPT4 test was performed with a fuel debris bed geometry, to look at late phase core degradation and the releases of low volatile fission products and actinides. Post Test Analyses results indicate that releases of noble gases (Xe, Kr) and high-volatile fission products (Cs, I) were nearly complete and comparable to those obtained during $Ph{\acute{e}}bus$ tests performed with a fuel bundle geometry (FPT1, FPT2). Volatile fission products such as Mo, Te, Rb, Sb were released significantly as in previous tests. Ba integral release was greater than that observed during FPT1. Release of Ru was comparable to that observed during FPT1 and FPT2. As in other $Ph{\acute{e}}bus$ tests, the Ru distribution suggests Ru volatilization followed by fast redeposition in the fuelled section. The similar release fraction for all lanthanides and fuel elements suggests the released fuel particles deposited onto the plenum surfaces. A blockage by molten material induced a steam by-pass which may explain some of the low releases. The revaporisation testing under different atmospheres (pure steam, $H_2/N_2$ and steam /$H_2$) and up to $1000^{\circ}C$ was performed on samples from the first upper plenum. These showed high releases of Cs for all the atmospheres tested. However, different kinetics of revaporisation were observed depending on the gas composition and temperature. Besides Cs, significant revaporisations of other elements were observed: e.g. Ag under reducing conditions, Cd and Sn in steam-containing atmospheres. Revaporisation of small amounts of fuel was also observed in pure steam atmosphere.

• Nuclear Engineering and Technology
• /
• v.45 no.6
• /
• pp.731-744
• /
• 2013

Energy security is a topic of high importance to many countries throughout the world. Countries with access to vast energy supplies enjoy all of the economic and political benefits that come with controlling a highly sought after commodity. Given the desire to diversify away from fossil fuels due to rising environmental and economic concerns, there are limited technology options available for baseload electricity generation. Further complicating this issue is the desire for energy sources to be sustainable and globally scalable in addition to being economic and environmentally benign. Nuclear energy in its current form meets many but not all of these attributes. In order to address these limitations, TerraPower, LLC has developed the Traveling Wave Reactor (TWR) which is a near-term deployable and truly sustainable energy solution that is globally scalable for the indefinite future. The fast neutron spectrum allows up to a ~30-fold gain in fuel utilization efficiency when compared to conventional light water reactors utilizing enriched fuel. When compared to other fast reactors, TWRs represent the lowest cost alternative to enjoy the energy security benefits of an advanced nuclear fuel cycle without the associated proliferation concerns of chemical reprocessing. On a country level, this represents a significant savings in the energy generation infrastructure for several reasons 1) no reprocessing plants need to be built, 2) a reduced number of enrichment plants need to be built, 3) reduced waste production results in a lower repository capacity requirement and reduced waste transportation costs and 4) less uranium ore needs to be mined or purchased since natural or depleted uranium can be used directly as fuel. With advanced technological development and added cost, TWRs are also capable of reusing both their own used fuel and used fuel from LWRs, thereby eliminating the need for enrichment in the longer term and reducing the overall societal waste burden. This paper describes the origins and current status of the TWR development program at TerraPower, LLC. Some of the areas covered include the key TWR design challenges and brief descriptions of TWR-Prototype (TWR-P) reactor. Selected information on the TWR-P core designs are also provided in the areas of neutronic, thermal hydraulic and fuel performance. The TWR-P plant design is also described in such areas as; system design descriptions, mechanical design, and safety performance.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.47 no.3
• /
• pp.201-205
• /
• 2002

This study was carried out to investigate storability and develop suitable storage method for barley. Rough and milled barley such as Olbori(covered barley), Ssalbori(naked barley) and Chalssalbori (waxy naked barley) were packaged in 3P bag and OPP film bag, respectively, and stored at ambient and low temperature warehouse conditions. The weight loss was higher in milled barley than that of rough barley during barley storage. Acid value, one of the most important factor for grain quality evaluation, was increased from 4.9-9.0 mg KOH/100g to 6.5-19.9mg KOH/100g in milled barley at 16 months after storage. Reducing sugar content was increased while germination and water absorption rates were decreased during barley storage period. In terms of penal taste of boiled barley, rough barley could be stored safely more than one year regardless of storage methods where-ase milled barley stored in ambient temperature ware-house produced nasty flavor at 8 to 10 months after storage.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.215-215
• /
• 2017

The preference for domestic cereal crop of Setaria Italica has been increased with the recent interest in healthy foods. However, the productivity of Korean domestic produce, which has been decreasing due to the lack of cultivation technology and the low rate of mechanization during cultivation. Increase of germination ability will have a positive effect on the cultivation by reducing the labor of the manpower consuming and weeding work. Therefore, red light, ultrasonication, liquid priming and liquid smoke treatment that are effective for the germination of the seeds evaluated. The seeds of 1.4mm or more were used for the experiment. The priming solution used in the experiment was 1% $KH_2PO_4$ (74mM). During the priming, the light treated seeds at 2000 lux for 15, 30, 60 and 120 minutes. Ultrasonicationd treatment was performed for 5, 10, and 20 minutes at exposures of 60%, 80%, and 100% of ultrasound up to 21.6 kHz during priming. Light or ultrasound treated seeds transferred to priming treatment at $15^{\circ}C$ for 24 hours. The treatment of the liquid smoke was divided into the treatment of the liquid smoke alone and the treatment of the liquid smoke with the priming. The liquid smoke alone was diluted with distilled water without priming solution and the treatment of the liquid smoke was diluted with the salt priming solution. Both treatments were performed at 0.0%, 0.5%, 1.0%, 5.0%, and 10.0% of the liquid smoke (pH7) concentration at $15^{\circ}C$ for 6 hours. After each treatment, the seeds were dried to moisture content ranged 5-8% at $25^{\circ}C$ for 24 hours. All treatments showed better results than the non-treated control. Light treatment for 120 minutes improved for germination percentage (GP), Germination uniformity (GU) and heath seed percentage (HS). Ultrasonication treatment was most effective when treated with ultrasound at 21.6 kHz for 5 minutes in all germination characteristics. Ten % of the liquid smoke increase in 92% GP, 1.8 days MGT, $54%{\cdot}day^{-1}GR$, 0.76 GU and 88% HS comparing to non-treated control (72% GP, 2.3 days MGT, $45%{\cdot}day^{-1}GR$, 1.48 GU, and 63 % HS). This study showed that it is possible to obtain high germination by adding liquid smoke treatment to the seeds supplied to the farmers. The efficacy of light, ultrasonication, inorganic salt priming, and liquid smoke treatment on the seeds found in the experiment will be a positive alternative to labor force problems in the cultivation by improving germination.

• Journal of Soil and Groundwater Environment
• /
• v.12 no.6
• /
• pp.53-59
• /
• 2007

Optimal quenching curves have been studied for the accurate analysis of $^{14}C$ in groundwater polluted by reducing efficiency of volatile organic compounds (VOCs) in liquid scintillation counter (LSC). The quenching parameters (SQP(E)) were measured for ten VOCs such as benzene, toluene, ethylbenzene, o-(m-,p-)xylene, trichloroethylene (TCE), tetrachloroethylene(PCE), carbon tetrachloride and chloroform. The quenching curves were plotted using $^{14}C$ standard solution and chloroform as a quenching agent. Optimal plotting conditions were determined for standard solution, LSC measuring time and the concentration of chloroform. The quenching effects of chlorinated organic compounds such as TCE, PCE, carbon tetrachloride and chloroform were greater than those of BTEX (benzene, toluene, ethylbenzene and xylene). Optimum measuring time was 100 minutes far 7,000 dpm/mL standard solution. A few mL of chloroform should be added for good quenching curves. These quenching curves have good correlation coefficients (> 0.99) and the curves could be applied to accurate analysis of $^{14}C$ in groundwater and tap water.

• Korean Journal of Soil Science and Fertilizer
• /
• v.22 no.2
• /
• pp.100-104
• /
• 1989

This study was carried out in order to develop a compound fertilizer for raising rice seedling in trays. A compound fertilizer, a trail product, was manufactured using the major fertilizer sources of ammonium sulfate, diammonium phosphate and potassium chloride in combination with zeolite and glutamic acid fermentation waste. Besides, polyacrylamide for slow release control of the fertilzer and Tachigaren and sulfuric acid for reducing the occurrence of seedling rot were used. The component ratios of N, $P_2O_5$ and $K_2O$ of trial product were 4.19, 5.41 and 4.05 percent respectively. The dissolution rate of nitrogen component in water for the trial product with polyacrylamide was lower about fifteen percents than the product without polyacylamide in six hours. Hymexazole, main component of Thachigaren, from the product was released about 86.2 percents in forty eight hours. When the product with polyacylamide applied on red earth soil and paddy soil, the pH of soil ranged from 4.6 to 5.4 for 25 days experiment.

• Journal of Food Hygiene and Safety
• /
• v.19 no.2
• /
• pp.74-83
• /
• 2004

Raw-fish food contains a lot of moisture and is a high-protein food. It is a first-stage processed food taking a lot of manual work. Therefore, it is classified as a PHF food, very liable to cause a bacterial food-poisoning. But its manufacturers are usually small-sized and a systematic sanitation management is difficult to expect. But the manufacturer participating in this study produces chilled fresh raw-fish food. Fish are sliced into two fillets, which are packaged under vacuum, kept and distributed in refrigerators, and sold within a day. It is a newly-developed kind of raw-fish food, and a more improved kind of raw-fish food making possible a systematic sanitation management. The HACCP (Hazard Analysis and Critical Control Point) is a systematic and continuous process-control method which is very efficient for controling food sanitation and reducing the expenses. A new HACCP model has been developed to be applied to a large-sized chilled fresh raw-fish food manufacturer. To ascertain its efficiency, the baterial examination was done to its workplace and products. The significance test was done on its data by "SPSS 12.0 for Window" and "Mann-Whitney U Test". The numbers of bacteria on its final products were significantly different in flatfish and porgy. The number of bacteria tended to decrease in each time-differential sampling (P＜.00l). The final food products showed no food-poisoning bacteria in all the time-differential tests and in all the samplings, which proves that the CCP of the HACCP system is under control. After the SSOP program was applied, no pathogenic bacteria were found in the work-place, and the kinds and numbers of bacteria decreased. The numbers of general bacteria and colon bacilli also showed a significant difference from those before the SSOP program in the filleting board (P＜.05), in the skinning board (P＜.0l), in the neck-removing knife (P＜.05), and in the filleting knife (P＜.01). The working equipments, periodically disinfected, also showed a significant difference in sanitary conditions (in the dehydrator, P＜.05). The number of bacteria found on the food-touching surface was within the standard (below 500/l00 cm$^2$) After the SSOP program was applied, the general bacteria and colon bacilli were not found. The quality of water used in the food processing was also within the standard. The numbers of bacteria falling from the air in the work-place were negligible in all the samplings (＜30CFU/l000ι). The staphylococci and fungi were not found.

• Food Science of Animal Resources
• /
• v.31 no.5
• /
• pp.748-755
• /
• 2011

This study was carried out to investigate the effect of dietary palm oil supplementation on the quality of the carcass and meat of Hanwoo (Korean cattle). Thirty-month-old steers were fed on a concentration with or without (control) palm oil for 3 mon prior to slaughter. The samples of M. longissimus were taken from all carcasses and then stored at $4^{\circ}C$ for 9 d. The carcass traits, total myoglobin content, pH value, total reducing ability, and myofibrillar fragmentation index were unaffected by supplementation with palm oil. However, the fat content, water-holding capacity, and tenderness were significantly increased by dietary palm oil (p<0.05). In the fatty acid composition, the palm oil group had a higher palmitic acid (C16:0) content and lower polyunsaturated fatty acids (PUFA) content compared to the control group (p<0.05). The lipid oxidation stability, myoglobin oxidation stability, and color stability were increased by dietary palm oil. It is concluded that supplemental palm oil increased the marbling and storage quality but decreased the PUFA in Hanwoo beef.

• Journal of the Korea Concrete Institute
• /
• v.20 no.6
• /
• pp.797-807
• /
• 2008

For this study, the semi-adiabatic temperature rising test is accomplished by using ternary system cement (OPC, BFS, FA) reducing temperature crack. Two tests are conducted; one is for the paste test, and the other is for the concrete test. As the results of paste tests, using fly ash is better to reduce hydration temperature than doing blast furnace slag. In the case of the paste mixed ternary system cement, the more fly ash is mixed and the less blast furnace slag is used, the lower the temperature is. The less the mixture ratio of blast furnace slag is and the more the mixture ratio of fly ash is, the later the temperature rising velocity and descending velocity are. Besides, the temperature is lower if water/binder ratio is high. The use of ternary system cement has the retardation effect of temperature rising because the time to reach the maximum temperature is in the order of OPC100, binary system cement, and ternary system cement. From the test, the maximum temperature of concrete used ternary system cement is $8{\sim}11^{\circ}C$ lower than that of concrete used OPC100. Moreover, temperatures rising velocity and descending velocity of ternary system cement range $47{\sim}51%$ and $37{\sim}42%$ compared with OPC100. The specimen of concrete shows remarkable low internal temperature and slow temperature rising velocity and descending velocity compared with the specimen of paste because it is that temperature loss of concrete is much more than paste specimen according to aggregates.