• International Journal of Air-Conditioning and Refrigeration
• /
• v.11 no.1
• /
• pp.40-49
• /
• 2003

Dynamic characteristics of water hammer arresters installed in a building water supply system have been investigated numerically by utilizing a commercial code that employs the method of characteristics. Some preliminary results with those arrester models produced in this study agree well with the previously reported. Then, the arrester models have been incorporated into a water supply pipe system of a 59 $m^2$apartment unit constructed by a leading construction company, and their dynamic characteristics have been investigated, especially on the reduction in the water hammer pressure. It is found that the setting of the arresters in the pipe system, which is recommended by the company, may not be proper for reducing the pressure down below 1,082.0 kPa (10.0 kg$g_f$/$cm^2$) when quick-closure valves in the pipe system are closed within 30 ms at the static pressure of 542.6 kPa (4.5 kg$g_f$/$cm^2$). More arresters in the system may be required to meet pressure criteria stated on the related standards and codes.

• Journal of Institute of Control, Robotics and Systems
• /
• v.14 no.11
• /
• pp.1165-1173
• /
• 2008

An water-reuse network design has drawn attention as a systematic method of reducing fresh water usage and increasing water-using efficiency. The final goal of an eco-industrial park(EIP) is accomplishing industrial sustainability and constructing water-reuse network can be a solution. When designing water-reuse network connecting various processes which consume water, the water pinch technology can be used frequently, since it simultaneously minimize freshwater usage and wastewater discharge. In this research water pinch technology is applied to develop an effective water-reuse network in an EIP. Three scenarios based on different reusing strategies were developed. The results show that the final water-reuse network can reduce the total fresh water usage more than 30%, while the water expenses decrease by 20%. It can be concluded that water pinch technology is an effective tool to optimize water-reuse network among different industrial facilities.

• Korean Journal of Environment and Ecology
• /
• v.29 no.5
• /
• pp.803-813
• /
• 2015

This study was intended to investigate recognition of the general public on water pollution and nonpoint pollution, and to promote participation of the common people in prevention and management of nonpoint pollution by investigating the necessity and participation in the education for reducing the nonpoint pollution. To this end, this study conducted questionnaire on 1,000 male and female adults over 20 years of age nationwide who are registered in Onpanel. The questionnaire was comprised of recognition on water pollution, preventive activity for nonpoint pollution, countermeasures for preventing nonpoint pollution, necessity of national education for reducing the nonpoint pollution, recognition of promotion and campaign participation, and revitalization of organization for reducing the nonpoint pollution. As a result of the questionnaire investigation, interest in water pollution of respondents was high, and specially, interest in the nonpoint pollution was higher when age, academic level, and income were higher that effectiveness of promotion and education on the source of nonpoint pollution is expected to be increased. Respondents recognized the effect of education on reducing the nonpoint pollution positively when they had higher interest, information, education and experience related to the reduction activity of nonpoint pollution. Therefore, formation of sympathy of the public is positively necessary for the nonpoint pollution management, and provision of civil activity program that increases information on the nonpoint pollution, education, and participation in reduction activity and easy promotion with high information communicability should be conducted continuously.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2005.05a
• /
• pp.215-218
• /
• 2005

This paper intended to evaluate the applicability of drying shrinkage reducing superplasticizer (DSRA) by investigating physical properties of concrete using DSRA, The application of flowing concrete method exhibited a less loss of slump and air content with time than those of conventional concrete and had small bleeding. Flowing concrete had larger compressive strength than base and conventional concrete by as much as $3\~5\%$. It also had less drying shrinkage by as much as $20\%$ compared with conventional concrete. This is due to the coupled effect of reduced water content and aqueous type expansive admixture. On the other hand, neutralization depth of flowing concrete showed greater than conventional concrete.

• The Korean Journal of Food And Nutrition
• /
• v.14 no.3
• /
• pp.222-227
• /
• 2001

The production results of the oriental functional beverage, which is aimed at reducing the alcohol concentration in blood, are as follows. Different kinds of herb medicine ingredients were combined to achieve the balance between Yin And Yang. They were grouped according to their respective characteristics and extracted by heat, Then they were combined and produced following the most effective mixture ratio. The drink produced by this way consisted mainly of water, Sugar, mineral, protein and fiber were partially contained. Among the minerals, the proportion of calcium, potassium, magnesium was high and iron was also contained. This drink turned out to be effective in reducing the alcohol concentration in blood within a very short time when it was taken once after drinking and taken aging 30 minutes later, which would double the dosage. This result shows that development of such a functional beverage using the herbal medicine, At the same time it will play an important part in reducing the alcohol concentrate in blood after drinking liquors.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2001.11a
• /
• pp.153-158
• /
• 2001

The effects of polymer-cement ratio and shrinkage-reducing agent content on the durability characteristics of ultrarapid-hardening polymer-modified mortars using redispersible polymer powder are examined. As a result, the flexural and tensile strengths of the ultrarapid-hardening polymer-modified mortars using redispersible polymer powder tend to increase with increasing polymer-cement ratio, and tend to decrease with increasing shrinkage-reducing agent content. However, the compressive strength of the ultrarapid-hardening polymer-modified mortars using redispersible polymer powder decrease with increasing polymer-cement ratio and shrinkage-reducing agent content. And, water absorption and mass change of chemicals resistance of ultrarapid-hardening polymer-modified mortars using redispersible polymer powder tend to decrease with increasing polymer-cement ratio.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2001.11a
• /
• pp.275-280
• /
• 2001

Recently, self-compacting concrete is applied in order to achieve workability improvement and rationalization in construction. But self-compacting concrete using viscosity agent has a difficulty in practical use because viscosity agent is invested small quantity and by man-power. Therefore in this paper we have been focused on the development and practical use of self-compacting concrete by hydraulic composition containing the segregation-reducing agent. According to mix variable, we find out right quantity of water, binder and rate of admixture replacement, and also we find out the optimum mix proportion. In the result, self-compacting concrete by hydraulic composition containing the segregation reducing agent gave satisfaction with standard and its demand will increase in the future.

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 2002.10a
• /
• pp.165-168
• /
• 2002

The effects of polymer-cement ratio, antifoamer agent content and shrinkage-reducing agent content on the drying shrinkage of polymer-modified mortars using redispersible polymer powder are examined. As a result, irrespective of the antifoamer content, the drying shrinkage of the polymer-modified mortars using redispersible polymer powder tend to decrease with increasing polymer-cement ratio and shrinkage-reducing agent content. Such a drying shrinkage development is due to the effect of reducing water from incorporation of EVA redispersible polymer powder and antifoamer agent.

• 한국연소학회:학술대회논문집
• /
• 2005.10a
• /
• pp.93-96
• /
• 2005

High temperature furnace such as Steam power plant and incinerator contribute considerable part of NOx generation and face urgent demand of De-NOx system. Reducing agents are necessary to use De-NOx system. In this study mixing caused by direct injection of reducing agent solution spray into flue gas duct was measured. Carbonated water was used as tracer and simulated agent because ammonia as a reducing agent is not proper to experiment. Mixing and evaporation must occur simultaneously and quickly enough to achieve desirable efficiency. To achieve that, the angle of attack of static mixer and the location is simulated and $CO_2$ concentration is measured.

• Journal of Power System Engineering
• /
• v.1 no.1
• /
• pp.35-41
• /
• 1997

Annular jet pump can be used for the transportation of solid materials and fish. The effect of mixing chamber on the characteristics of annular jet pump is sought in this paper. Experiments were done for several reducing angles of mixing chamber, and for several throat area. Water was used for both the primary fluid and secondary fluid. A vortex was observed for the straight mixing chamber, but it was not observed for the mixing chamber whose reducing angle is $18^{\circ}$ or higher. The efficiency curves for the annular jet pump are presented in this paper, showing the annular jet pump which has 240 reducing angle and $0.611{\sim}0.73$ value of At/As. is most effective among the tested several annular jet pumps.