• Asian-Australasian Journal of Animal Sciences
• /
• v.27 no.3
• /
• pp.447-456
• /
• 2014

The use of electrical stimulation (ES) as a management tool to improve meat quality and efficiency of meat processing is reviewed. The basis of the efficacy of ES is its ability to fast track postmortem glycolysis, which in turn stimulates myriad histological, physical, biochemical, biophysical and physiological changes in the postmortem muscle. Electrical stimulation hastens the onset and resolution of rigor mortis thereby reducing processing time and labor and plays a vital role in improving meat tenderness and other meat quality traits. However, ES may have negative impacts on some meat quality traits such as color stability and water holding capacity in some animals. Electrical stimulation is not an end in itself. In order to achieve the desired benefits from its application, the technique must be properly used in conjunction with various intricate antemortem, perimortem and postmortem management practices. Despite extensive research on ES, the fundamental mechanisms and the appropriate commercial applications remained obscured. In addition, muscles differ in their response to ES. Thus, elementary knowledge of the various alterations with respect to muscle type is needed in order to optimize the effectiveness of ES in the improvement of meat quality.

• ALGAE
• /
• v.24 no.3
• /
• pp.179-184
• /
• 2009

Methanol crude extract of the sea grass Zostera marina L. and organic solvent fractions (n-hexane, chloroform, ethyl acetate, n-butanol, and water) were screened for antioxidant activity (total phenolic contents, DPPH scavenging activity, and reducing power) and antimicrobial activity against three human skin pathogens, two bacteria and a yeast; Staphylococcus aureus, Staphylococcus epidermidis, and Candida albicans. Total phenolic contents and 2, 2- diphenyl-1-picrylhydrazyl (DPPH) scavenging activity were highest in the ethyl acetate fraction with 968.50 $\mu$g gallic acid equivalent per milligram of extract, and ca. 95% scavenging activity on the DPPH radicals at 10 mg $ml^{-1}$. In antimicrobial activity tests, MICs (Minimum Inhibitory Concentration) of each Zostera marina extract partitioned ranged from 1mg to 8 mg $ml^{-1}$ (extract/ 10% DMSO) against all three human skin pathogens. The MICs of the ethyl acetate and n-butanol fractions were the same with 1 mg $ml^{-1}$ against S. aureus and C. albicans. The ethyl acetate fraction of Z. marina does protect against free radicals and may be used to inhibit the growth of human skin pathogens.

• Korean Membrane Journal
• /
• v.8 no.1
• /
• pp.13-20
• /
• 2006

The production of CO-free hydrogen streams for feeding PEM-Fuel Cells using catalytic zeolite membrane reactors was analysed by means of selective oxidation. Tubular FAU (Na-Y) zeolite membranes, prepared by a secondary growth method and Pt-loaded, were used in a flow-through MR configuration. The catalytic tests were carried out at $200^{\circ}C$ and at different pressures with a simulated dry reformate shifted gas mixture ($H_2$ ca. 60%, CO 1 %, plus $O_2,\;N_2,\;CO_2$). The operative $O_2/CO$ stoichiometric equivalent feed ratio was ${\lambda}= 2$. These catalytic tests, reducing the CO concentration down to $10{\sim}50$ ppm, verified the possibility of MR integration after using a low temperature water-gas shift unit of a fuel processor to convert hydrocarbons into hydrogen-rich gas.

• Membrane Journal
• /
• v.24 no.3
• /
• pp.240-248
• /
• 2014

Porous PVDF hollow fiber membranes were prepared by hybrid process of TIPS(thermally induced phase separation) and stretching for membrane distillation. The tests were conducted to investigate that permeability of the membrane could be enhanced by reducing membrane wall thickness. During fiber spinning, dope discharge rate from nozzle was reduced and flow rate of bore fluid increased to make the wall thickness thinner. As dope discharge rate from nozzle was reduced and flow rate of bore fluid increased, the membrane wall thickness was reduced. As a result, air permeability, water permeability and vapor permeability of the membranes increased.

• Ocean and Polar Research
• /
• v.37 no.4
• /
• pp.279-285
• /
• 2015

In this study, the potential capacity of the crude extract and its solvent fractions from S. siliquanstrum against adipocyte differentiation were evaluated in 3T3-L1 adipocytes. The anti-adipogenic effect of S. siliquanstrum was evidenced by the fact that its crude extract decreases the lipid accumulation of differentiating cells and the expression levels of crucial adipogenesis markers, peroxisome proliferator-activated receptor $(PPAR){\gamma}$ and CCAAT/enhancer-binding protein $(C/EBP){\alpha}$. All solvent fractions except the water fraction showed an observable decrease in lipid accumulation and $PPAR{\gamma}$ and $C/EBP{\alpha}$ expressions. In conclusion, these results suggest that S. siliquanstrum possesses obesity inhibiting components, which may possibly be used as a valuable anti-obesity agent for reducing the risk of obesity.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.30 no.2
• /
• pp.250-255
• /
• 2001

Effect of molding temperature on the quality changes of extruded meju was studied. Meju was molded at 8$0^{\circ}C$, 6$0^{\circ}C$ and 4$0^{\circ}C$, and then stored at $25^{\circ}C$ with 50% of relative humidity for 30 days. The texture of the cooked soybean grain showed that the firmness and cohesiveness were increased, and consistency was decreased by decrease of molding temperature. The density of the meju molded at 8$0^{\circ}C$, 6$0^{\circ}C$ and 4$0^{\circ}C$ were 1.072g/mL, 1.079g/mL and 1.203g/mL, respectively. The meju molded at 4$0^{\circ}C$ had significantly higher density than those molded at 8$0^{\circ}C$ or 6$0^{\circ}C$. Also, delay of water evaporation, acidification, and rapid growth of fungal mycellium were observed on the sample with molding temperature at 4$0^{\circ}C$ during fermentation. Activity of amylase and protease, contents of total reducing sugar and amino nitrogen of 4$0^{\circ}C$-molded meju were represented lower level than those of 6$0^{\circ}C$ or 8$0^{\circ}C$-molded sample. Therefore, it was considered that the molding temperature was an important factor for meju fermentation and molding temperature of 6$0^{\circ}C$ or over would be acceptable.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.9 no.1
• /
• pp.127-133
• /
• 2001

It can be known that from leachate generated in the initial stage of landfill there are a lot of undecomposed orgainc materials, its sulfur component reduces to sulfide ion by sulfur reducing microorgarnisms as an anaerobic digestion proceeds, the sulfide ion makes the leachate discolor to black by forming metal sulfide sol, on condition that much more equivalent of sulfide ion than that of metal ion is present, and the metal sulfide sol can be generated to the precipitates by forming black-colored particulates. Therefore, we can confirm the important possibility for the economic and efficient treatment of leachate that it can be passivated, provided that much more equivalent of sulfide ion is present in the reaction of sulfide ion and metal ion.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.16 no.3
• /
• pp.55-62
• /
• 2013

Generally, the radioactivity from NPP(Nuclear Power Plants) operation can be released below 3% of DRLs(Derived Release Limits) to environment. It was tried to understand which plant was efficient for absorbing radioactivity in this study. Pinus thunbergii Parl. and Viburnum awabuki K. KOCH were analyzed for radioisotope absorption. The samples were collected at three different locations depending on the distance from NPP at the vicinity 10km away, and 30km away. Gamma radionuclide was not detected from the samples, which means that the direct transition into the plant was not significant. Meanwhile, the very low level of radioactive tritium was detected in the samples. One remark was that every plant has different ability for tritium absorption. These results are expected to be applied to propagation and transplanting in radioactively contaminated area or reducing radioactivity in the soil and water near the plants.

• Tribology and Lubricants
• /
• v.33 no.6
• /
• pp.251-255
• /
• 2017

In this study, we aimed to clarify the wettability and anisotropic flow characteristics of rice leaves as a basic study for engineering applications of anisotropic flow characteristics of rice leaf surface. To investigate the surface structure of rice leaf, the micro grooves and asperities of rice leaves were analyzed and quantified by scanning electron microscope, Confocal laser scanning microscopy, and stylus profilometer. The analysis of the structure of rice leaf surface confirmed that asymmetrical cone - like protrusions in leaf veins were inclined toward the leaf tip. The static contact angle test showed that the contact angle at the midline vein or leaf vein location where the micropapilla is concentrated is about $20^{\circ}$ higher than the leaf blade position. The contact angles of fresh and dried rice leave were also compared. The dried rice leaves showed a contact angle of about $5^{\circ}$ to $15^{\circ}$ higher than that of fresh leaves, suggesting that the volume of the protrusions decreased as the water was removed, thus reducing the contact area with the droplet. In the contact angle history test the hysteresis in the leaf tip direction was found to be much lower than that in the leaf petiole direction. This results can be explained that asymmetrical cone - like protrusions had a significant effect on the droplet flow characteristics through contact angle hysteresis experiment.

• Natural Product Sciences
• /
• v.10 no.4
• /
• pp.168-172
• /
• 2004

In India, Gymnema sylvestre due to the unique property of the plant to antagonize the sweet taste is known as 'Gur-mar'. It has several ethnomedicinal values as various tribals/traditional communities and rural peoples of India find diverse medicinal uses viz. antidiabetic, stomachic, diuretic, and is useful in cough and throat troubles. Besides, it has strong effect on reducing blood sugar. The present communication deals with the detailed pharmacognostical evaluation of the aerial parts of G. sylvestre collected from three places of the country-Varanasi (U.P), Panchmarhi (M.P), Salem (Tami Nadu) and commercial sample procured from local market. The botanical and physico-chemical parameters of all the samples were quite similar though little variations were observed in foaming index, alcohol and water soluble extractives of local sample. The microscopic characteristics of the drug are horse shoe shaped petiole with 3 amphicribal vascular bundles, sieve tubes well developed; anomocytic stomata only on the abaxial surface of the leaf, the fan shaped amphicribal vascular bundle, presence of intraxylary phloem. The TLC fingerprint profile of all the samples was more or less similar only the quantity of some of the compounds varied.