• Resources Recycling
• /
• v.31 no.4
• /
• pp.56-65
• /
• 2022

Copper is one of the non-ferrous metals used in the electrical/electronic manufacturing industries due to its superior properties particularly the high conductivity and less resistivity. The effluent generated from the surface finishing process of these industries contains higher copper content which gets discharged in to water bodies directly or indirectly. This causes severe environmental pollution and also results in loss of an important valuable metal. To overcome this issue, continuous R & D activities are going on across the globe in adsorption area with the purpose of finding an efficient, low cost and ecofriendly adsorbent. In view of the above, present investigation was made to compare the performance of a plant root (Datura root powder) as a bio-adsorbent to that of the synthetic one (Tulsion T-42) for copper adsorption from such effluent. Experiments were carried out in batch studies to optimize parameters such as adsorbent dose, contact time, pH, feed concentration, etc. Results of the batch experiments indicate that 0.2 g of Datura root powder and 0.1 g of Tulsion T-42 showed 95% copper adsorption from an initial feed/solution of 100 ppm Cu at pH 4 in contact time of 15 and 30 min, respectively. Adsorption data for both the adsorbents were fitted well to the Freundlich isotherm. Experimental results were also validated with the kinetic model, which showed that the adsorption of copper followed pseudo-second order rate expression for the both adsorbents. Overall result demonstrates that the bio-adsorbent tested has a potential applicability for metal recovery from the waste solutions/effluents of metal finishing units. In view of the requirements of commercial viability and minimal environmental damage there from, Datura root powder being an effective material for metal uptake, may prove to be a feasible adsorbent for copper recovery after the necessary scale-up studies.

• Journal of the Korean Society of Radiology
• /
• v.17 no.3
• /
• pp.441-447
• /
• 2023

Lead(Pb), which is currently mainly used for shielding purposes in the medical radiation, has excellent radiation shielding functions, but is continuously exposed to radiation directly or indirectly due to the harmfulness of lead itself to the human body and the inconvenience caused by its heavy weight. Research on shielding materials that are human-friendly, lightweight, and convenient to use that can block risks and replace lead is continuously being conducted. In this study, based on the commonly used polyethylene terephthalate (PET) film and the fabric material used in actual radiation protective clothing, a multi-layer thin film was realized through sputtering and vacuum deposition of bismuth, tungsten, and tin, which are metal materials that can shield radiation. Thus, a shielding film was produced and its applicability as a radiation shielding material was evaluated. The radiation shielding film was manufactured by establishing the optimized conditions for each shielding material while controlling the applied voltage, roll driving speed, and gas supply amount to manufacture the shielding film. The adhesion between the parent material and the shielding metal thin film was confirmed by Cross-cut 100/100, and the stability of the thin film was confirmed through a hot water test for 1 hour to measure the change of the thin film over time. The shielding performance of the finally realized shielding film was measured by the Korea association for radiation application (KARA), and the test conditions (inverse wide beam, tube voltage 50 kV, half layer 1.828 mmAl) were set to obtain an attenuation ratio of 16.4 (initial value 0.300 mGy/s, measured value 0.018 mGy/s) and damping ratio 4.31 (initial value 0.300 mGy/s, measured value 0.069 mGy/s) were obtained. by securing process efficiency for future commercialization, light and shielding films and fabrics were used to lay the foundation for the application of films to radiation protective clothing or construction materials with shielding functions.

• Journal of the Korean Society of International Agriculture
• /
• v.23 no.5
• /
• pp.475-484
• /
• 2011

International price of cereal has been dramatically increasing for the past few years. This price hike amplified the importance of food self-sufficiency in numerous countries due to the fact that food security is directly proportional to food self-sufficiency. In this study, we conducted a survey to provide useful information of Cambodia's agricultural environment to possible Korean agricultural investors and as to highlight Cambodia as a strong candidate for the establishment of Korea's foreign base for cereal production. The survey conducted includes information regarding Cambodia's agricultural environment and investment circumstances including the political, economical and other contributing factors affecting agricultural investment in Cambodia. Seventy percent of the Cambodia's total population engage in agriculture and this comprises about 30% of the country's GDP. This statistics reflects the possibility of Cambodia's poverty alleviation which proves that agriculture in Cambodia is the driving force for the improvement of the country's economy. In addition, low labor cost, fertile land, abundant water resources, like the Tonle sap lake and the Mekong river, and unreclaimed lands are the strong points that could attract agricultural investors to Cambodia. Poor infrastructure, irrigation systems, law reforms, including social and cultural differences may be the biggest setbacks for the acceleration of Cambodia's agriculture development. However, the Cambodian government is open and willing to make adjustments for Cambodia to be both foreign and domestic agricultural investor-friendly, expecting that it will boost its country's agricultural development. Making the best out of this opportunity, the coordination of KOICA with Korean agricultural investors in building infrastructures and with the help of the KOPIA program for the transfer of agricultural technology will benefit both countries and will play an important role in Cambodia's agriculture.