• Title/Summary/Keyword: water-cooled cutting

Search Result 9, Processing Time 0.02 seconds

A Study on the Effect of Cooled Water-Soluble-Cutting Fluids on the Machinability (수용성 절삭유제의 냉각성이 피삭성에 미치는 영향에 관한 연구)

  • 김정두
    • Tribology and Lubricants
    • /
    • v.4 no.2
    • /
    • pp.52-59
    • /
    • 1988
  • The purpose of this study is to establish a standard for proper selection of water soluble cutting fluids, such as Emulsion type, Semi-Synthetic type and synthetic type, by investigating cutting effects at the normal temperature(26$\circ$C) and cooling temperature(0$\circ$C) from the viewpoint of cooling and lubricant actions. This paper describes a relation among cutting force, surface roughness and cooled water soluble cutting fluids which are considered as effective restraints on Built up edge.

An Experimental Verification on the Development of an Innovative Diamond Wire Saw Cutting Technology (새로운 다이아몬드 와이어 쏘 절단 기술 개발에 관한 실험적 검증)

  • Park, Jong Hyup;Chu, Baeksuk
    • Journal of the Korean Society of Manufacturing Process Engineers
    • /
    • v.17 no.6
    • /
    • pp.83-90
    • /
    • 2018
  • This paper introduces a innovative diamond wire saw cutting technology and its experimental verification that can be utilized for cutting heavy structures. While conventional diamond wire saw cutting technologies such as water cooled cutting method and dry cutting method cause severe environmental problems due to generating massive concrete sludge or dust scattering, the proposed method can eliminate those problems considerably. Through extensive experiments using heavy structure test bed and real bridge pier structure, comprehensive analysis and comparative evaluation about various cutting methods were performed. As a result, the innovative diamond wire saw cutting method could achieve a similar cutting and cooling performance to the water cooled cutting method without generating concrete sludge and it showed an improved cutting and cooling performance to the dry cutting method without dust scattering. Consequently it is confirmed that the suggested cutting technology can be a promising environment-friendly alternative in the field of heavy structure dismantling.

Effect of Cooling Method on Surface Roughness in Turning (선삭가공에서 표면 거칠기에 미치는 냉각방법의 영향)

  • Kim, Yeong-Duck
    • Journal of the Korean Society of Manufacturing Process Engineers
    • /
    • v.10 no.3
    • /
    • pp.87-93
    • /
    • 2011
  • CNC lathe machining has been widely used for parts machining of vehicles, aircraft, ships, electronics, etc. because cost savings for shortening processing time and increasing productivity are great. In this study, the purpose is to investigate the effect of cooling methods such as oil mist, water-soluble cutting oils on the workpiece surface roughness with the cutting speed, cutting depth, tool nose radius and feed rate of CNC lathe machine as a parameter in the cutting process of the aluminum alloy 2024 which is used a lot recently on aircraft parts. It is found that oil mist is coolant and water-soluble cooled by cutting the experimental conditions, cutting speed and cutting depth without effecting the surface roughness value was constant.

An experimental study on the development and verification of NCC(new concrete cutting) system

  • Park, Jong-Hyup;Han, Jong-Wook
    • Structural Engineering and Mechanics
    • /
    • v.65 no.2
    • /
    • pp.203-211
    • /
    • 2018
  • This paper introduces the development process of NCC(New Concrete Cutting) system and analyzes first verification test. Based on the first verification test results, some problems of NCC system have been newly modified. We carry out the second verification test. We tried to verify cutting performance and dust control efficiency of NCC system through the cutting test of concrete bridge piers. In particular, this verification test strives to solve the problem of concrete dust, which is the biggest problem of dry cutting method. The remaining dust problems in cutting section tried to solve through this verification test. This verification test of the NCC system shows that the dust problem of dry cutting method is closely controlled and solved. In conclusion, the proposed NCC method is superior to the dry cutting method in all aspects, including cutting performance, dust vacuum efficiency and cooling effect. The proposed NCC system is believed to be able to provide eco-friendly cutting technology to various industries, such as the removal of the SOC structures and the dismantling of nuclear plants, which have recently become a hot issue in the field of concrete cutting.

A Study on the Performance of the Condensation and the Boiling Heat Transfer of Low Fin Tubes Used in Cooling of the Cutting Oil (절삭유 냉각용 낮은 핀관의 응축 및 비등 열전달 성능에 관한 연구)

  • 이종선
    • Journal of the Korean Society of Manufacturing Technology Engineers
    • /
    • v.8 no.4
    • /
    • pp.68-78
    • /
    • 1999
  • Heat transfer performance is studied for boiling and condensation of R-11 on integral-fin tubes. Nine tubes with trapezoidal integral-fins having fin densities from 748 to 1654fpm and 10,30 grooves and finned tubes with caves of 0.55 and 0.64 mm height respectively are tested. in case of condensation CFC-11 condensates at saturation stat of 32$^{\circ}C$ on the outside surface cooled by inside cooling water flows. And in case of boiling the refrigerant evaporates at a saturation state of 1 bar on the outside tube surface and heat is supplied by hot water which circulates inside of the tube,. The tube having fin transfer coefficient concerns fin tubes with caves show higher valve than low fin tube having find density of 1299fpm and 30grooves. The overall heat transfer coefficient of fin tube with caves is about 5155 W/mK at 2.8m/s of water velocity, The value is abuot 2.7 times higher than plain tube and 1.3 times higher than low fin tube having fin density of 1299fpm and 30 grooves.

  • PDF

A Study on the Performance of the Condensation and the Boiling Heat Transfer of Low Fin Tubes Used in Cooling of the Cutting Oil (절삭유 냉각용 낮은 핀관의 응축 및 비등 열전달 성능에 관한 연구)

  • Jo, Dong Hyeon;Lee, Jong Seon
    • Journal of the Korean Society of Manufacturing Technology Engineers
    • /
    • v.8 no.4
    • /
    • pp.65-65
    • /
    • 1999
  • Heat transfer performance is studied for boiling and condensation of R-11 on integral-fin tubes. Nine tubes with trapezoidal integral-fins having fin densities from 748 to 1654fpm and 10,30 grooves and finned tubes with caves of 0.55 and 0.64 mm height respectively are tested. in case of condensation CFC-11 condensates at saturation stat of 32℃ on the outside surface cooled by inside cooling water flows. And in case of boiling the refrigerant evaporates at a saturation state of 1 bar on the outside tube surface and heat is supplied by hot water which circulates inside of the tube,. The tube having fin transfer coefficient concerns fin tubes with caves show higher valve than low fin tube having find density of 1299fpm and 30grooves. The overall heat transfer coefficient of fin tube with caves is about 5155 W/mK at 2.8m/s of water velocity, The value is abuot 2.7 times higher than plain tube and 1.3 times higher than low fin tube having fin density of 1299fpm and 30 grooves.

A Study on the Performance of Heat Transfer of Low Fin Tubes Used in Cooling of the Cutting Oil of the Machine Tool (공작기계 절삭유 냉각용 낮은 핀관의 열전달 성능에 관한 연구)

  • 조동현
    • Proceedings of the Korean Society of Machine Tool Engineers Conference
    • /
    • 1998.10a
    • /
    • pp.125-133
    • /
    • 1998
  • Nine tubes with trapezoidal integral-fins having fin densities from 748 to 1654fpm and 10,30 grooves and finned tubes with caves of 0.55 and 0.64mm height respectively are tested. A plain tube having same diameter as the finned tubes is also tested for comparison. In case of condensation CFC-11 condensates at saturation state of 32$^{\circ}C$ on the outside surface cooled by inside cooling water flows. And in case of boiling the refrigerant evaporates at a saturation state of 1bar on the outside tube surface and heat is supplied by hot water which circulates inside of the tube. The tube having fin density of 1299fpm and 30grooves has the best condensation overall heat transfer coefficient. However, as far as boiling heat transfer coefficient concerns, fin tubes with cave show higher value than low fin tube having fin density of 1299fpm and 30 grooves.

  • PDF

Evaluation of Microbiological Hazard of Cooking Utensils and Environment of Large Foodservice Establishments in Daegu city (대구지역 대형 식품접객업소 조리기기 및 환경에 대한 미생물학적 위해분석)

  • Nam Eun-Jeong;Kang Young-Jae;Lee Yeon-Kyung
    • Food Science and Preservation
    • /
    • v.13 no.2
    • /
    • pp.234-240
    • /
    • 2006
  • The purpose of this study was to evaluate microbiologically cooking utensils, equipment employees, and environment in 12 large Korean, Western, Chinese, and Japanese restaurant. Microbiological testing was conducted for pathogens including E. coli, Samolnella, L. monocytogenes, S. aureus, E. coli O157:H7, V. parahaemolyticus, B. cereus, and Y. enterocolitica as well as total plate count and coliforms. The results showed cooking water and drinking water in some Korean restaurants and drinking water in some Western and Japanese restaurants were unsatisfactory, especially, barley tea, which was cooled after being boiled, was unsatisfactory. Most cooking utensils such as knives, cutting boards, kitchen towels, tongs, and basket had total plate and coliforms count in excess of standards, and knives and cutting boards at some Chinese restaurant had E. coli. At some restaurant, S. aureus was found on some food worker's hands. Also, the total plate count of the air showed a high count around worktables, inside the refrigerator, and in the kitchen in most restaurants. These result suggest that sanitation needs improvement in the environments in these foodservice establishment.

The Literary Investigation On Types and Cooking Method of Bap (Boiled Rice) During Joseon Dynasty($1400's{\sim}1900's$) (조선시대 밥류의 종류와 조리방법에 대한 문헌적 고찰(1400년대${\sim}1900$년대까지))

  • Bok, Hye-Ja
    • Journal of the Korean Society of Food Culture
    • /
    • v.22 no.6
    • /
    • pp.721-741
    • /
    • 2007
  • 1. For the types of boiled rice, there were 1 type of bap, 1 type of jebap cooked with glutinous rice, 13 types of boiled rice cooked by mixing grains and nuts such as daemakban, somakban, jobap, cheongryangmiban, jobap, gijangbap, yulmubap, hyeonmibap, boribap and patmulbap as well as patbap, congbap, byeolbap and bambap etc as ogokbap. Also, there were 12 types of bap cooked by mixing herb medicinal ingredients such as cheongjeong, oban, boksungabap, gumeunsaekbap, hwanggukgamchobap, yeongeunbap, okjeongbap, gogumabap, dububap, samssibap, dorajibap, gamjabap, songibap and jukshilbap. There were 7 types bap cooked as unique one bowl dish at the present as bapby mixing fish, meat, shellfish and milk as ingredients are hwangtang, gyejanggukbap, janggukbap, gulbap, kimchibap, chusaban and bibimbap, etc and the types of bap that have been analyzed are 34 total. 2. For the food ingredients used in bap types 23 types of miscellaneous grains, 5 types of nuts and 11 types of meat, 6 types of fish, 35 types of vegetables, 2 types of fruit including pears or peaches were used. Garlic wasn't used perhaps because of it being boiled rice 3. Types of Sap by Cooking Methods. (1) The ssalbap was cooked by first boiling water, putting in rice grains and boiling hard to be cooked as overcooked bap (rice). (2) The japgokbap (boiled cereals) has used buckwheat, barley job's tear, etc to be boiled down by soaking the ones with large grains (beans) first in advance to be boiled down or cooked by crushing into fine pieces. The red bean, etc was boiled down in advance or placed at the bottom of pot by cutting into two pieces while jujube or nut was cut into three pieces to cook the bap by pouring a lot of water and mixing other ingredients. (3) The gukbap (soup boiled rice), etc were cooked by squeezing out the yellow chrysanthemum that has dried chrysanthemum to cook the boiled rice by putting in rice and gukbap, meat or bones, etc were boiled down for a long time and decorated with meat or wild greens by mixing the bap in the meat juice. For gulbap (oyster boiled rice), etc, it was cooked as ingredients were stir fried in advance or washed and put in when the bap was about half cooked. (4) For bibimbap (mixed boiled rice), after the bap was overcooked first with rice, the wild greens were mixed lightly with bap beforehand, then the wild greens, decorations and garnishings were laid above rice and red pepper powder was sprinkled. (5) Namchok leaves, etc were boiled to cook the boiled rice with rice after being cooled while namchok stem and leaves were pounded to make juice and cooked the bap with rice. The peach, lotus root and yams were cut into fine pieces to be put in together when rice was about half done. The bellflower was soaked in water to be boiled down for a long time while potatoes and pine mushrooms, etc were cut into fine pieces to cook the bap (boiled rice) with rice.