• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.25 no.1
• /
• pp.1-14
• /
• 1992

With 16 years' oceanographic data(1973-1988) of the National Fisheries Research and Development Agency and the CTD data collected by a training ship of Korea Maritime University during Nov. 6-11, 1989, the inflow path of the bottom cold water in the western channel of the Korea Strait were investigated. Temperature of the bottom water in the western channel shows the lowest in summer and large annual variation. According to the temperature distributions in the years when the bottom cold water exists in the western channel in summer, the cold water in the southwestern region of the East Sea seems to intrude into the western channel through the sea southeast 10- 15 miles off Ulsan with its properties showing slight change during advection.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.8 no.4
• /
• pp.379-386
• /
• 2020

The present study examined the effect of bottom ash aggregate contents on the compressive strength gain and mechanical properties(modulus of elasticity and rupture and splitting tensile strength) of concrete. Main test parameters were water-to-cement ratio and bottom ash aggregate contents for replacement of natural sand. Test results showed that the 28-days compressive strength of concrete and mechanical properties normalized by the compressive strength tended to decrease with the increase in bottom ash fine aggregate content. When compared with fib 2010 model equations, bottom ash aggregate concrete exhibited the following performances: lower rates of compressive strength gain at early ages but greater rates at long-term ages; slightly higher measurements for modulus of elasticity and rupture; and lower measurements for splitting tensile strength.

• The Journal of the Acoustical Society of Korea
• /
• v.23 no.5
• /
• pp.362-369
• /
• 2004

The High-frequency (30 ∼ 120 ㎑) bottom reflection loss at rough water-sediment interface is affected by the gram size distribution of the sediments. The roughness of the bottom surface is represented by "acoustical roughness. g/sub R/" The grain size of sandy sediments is g/sub R/∼O(1) and the dependence as a function of frequency. We suggest the modified bottom reflection loss model (HYBRL model , HanYang university Bottom Reflection Loss model) that include in the deviation of the reflection loss as a function of the grain size distribution and frequency dependence. And bottom reflection loss model of frequency dependence and deviation of bottom properties is verified by water tank and field experiments.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.57 no.1
• /
• pp.99-109
• /
• 2015

In the construction industry, the interest for recycling aggregates is rising as more people demand for alternatives due to lack of supply of natural aggregates and environmental problems. However, in order for recycled aggregates to be used in infrastructures, stability and other factors need to be verified. Therefore, the objective of this study is to analyze the sensitivity of soil properties to secure slope safety according to various heights of embankment when bottom ash and dredged soil mixture is applied in the embankment. In most cases, all heights were safe for the slide for the embankment whether the water level is full or sudden draw down. The result of the sensitivity analysis revealed that the unit weight of embankments is highest among all factors to be considered. However, the sensitivity of the unit weight became smaller and the sensitivity of the friction angle of embankments increased with the height of embankments. The sensitivity of factors of core materials is very small because the core has weaker physical properties than those of the embankment. The effect of the height for each factor is different for each slope and water levels. The sensitivity of the unit weight of embankments is most affected when the height is 60m in the upstream slope. To conclude, bottom ash and dredged soil mixture can be applied in the embankment and different factors must be considered in different scale because the sensitivity depends highly on the height of embankments.

• Advances in concrete construction
• /
• v.6 no.4
• /
• pp.407-422
• /
• 2018

The study evaluates properties of brick having coal ash and explores the possibility of utilization of coal bottom ash and coal fly ash as an alternative raw material in the production of coal ash bricks. Lower cement content was used in the investigations to attain appropriate strength and prohibit high carbon content that is cause of environmental pollution. The samples use up to 7% of cement whereas sand was replaced with bottom ash. Bricks were tested for compressive strength, modulus of rupture, ultrasonic pulse velocity (UPV), water absorption and durability. The results showed mix proportions of bottom ash, fly ash and cement as 1:1:0.15 i.e., M-15 achieved optimum values. The coal ash bricks were well bonded with mortar and could be feasible alternative to conventional bricks thus can contribute towards sustainable development.

• Journal of the Korea Concrete Institute
• /
• v.17 no.2 s.86
• /
• pp.293-302
• /
• 2005

This study describes data from determination of the optimum mix proportion and site application of the mass concrete placed in bottom slab and side wall having a large depth and section as main structures of LNG in-ground tank. This concrete requires low heat hydration, excellent balance between workability and consistency because concreting work of LNG in-ground tank is usually classified by under-pumping, adaptation of longer vertical and horizontal pumping line than ordinary pumping condition. For this purpose, low heat Portland cement and lime stone powder as cementitious materials are selected and design factors including unit cement and water content, water-binder ratio, fine aggregate ratio and adiabatic temperature rising are tested in the laboratory and batch plant. As experimental results, the optimum unit cement and water content are selected under $270kg/m^3$ and $l55{\~}l60 kg/m^3$ separately to control adiabatic temperature rising below $30^{\circ}C$ and to improve properties of the fresh and hardened concrete. Also, considering test results of the confined water ratio($\beta$p) and deformable coefficient(Ep), $30\%$ of lime stone powder by cement weight is selected as the optimum replacement ratio. After mix proportions of 5cases are tested and compared the adiabatic temperature rising($Q^{\infty}$, r), tensile and compressive strength, modulus of elasticity, teases satisfied with the required performances are chosen as the optimum mix design proportions of the side wall and bottom slab concrete. $Q^{\infty}$ and r are proved smaller than those of another project. Before application in the site, properties of the fresh concrete and actual mixing time by its ampere load are checked in the batch plant. Based on the results of this study, the optimum mix proportions of the massive concrete are applied successfully to the bottom slab and side wall in LNG in-ground tank.

• 한국해양학회지
• /
• v.4 no.2
• /
• pp.71-82
• /
• 1969

By use of the oceanographic data from 1932 to 1941 and from 1960 to 1967, the general properties of the cold water in the Korea Strait are discussed. This water characterized with temperatures 3-10$^{\circ}C$ and salinities 34.0-34.4 originates from the Japan Sea and begins to flow out in summer along the bottom about 8 to 18 miles southeast of Ulgi in Ulsan. It usually reaches the Pusan- Tsushima section and rarely to the west of the southernmost part of Tsushima. As it flows out, it shows rising trend along the coast of Korea and sometimes upwelling occurs in the vicinity of Ulsan. It seems that the cold water forms an under current along the bottom in summer and autumn in the western channel of the Korea Strait.

• Journal of Korean Port Research
• /
• v.11 no.2
• /
• pp.203-214
• /
• 1997

Hydraulic dredgers(Hopper dredger) are the most important piece of equipment in the entire harbor engineering field, and most suitable for the removal of sand and weakly consloidated sediment such as silt. In maintenance dredging, specially confined harbor or congested passage area, Hopper dredger is user most popularly because less obstruction and danger to navigation than other mostly stationary dredgers. Investigation of the physical behave of dredged material disposal in coastal water from the Hopper dredger includes estimations of pattern as well as thickness of material on the bottom. Calculation based on vertical settling and horizontal advection of single particles ignore the effects of bulk properties of the disposed marterial, vertical and horizontal diffusion. and material dilution due to the entrainment of ambient water during descent. This paper focuses on the analysis of dredging and dumping characteristics and the spatial and temporal changes in the dumping fields for the water column and bottom at a hypothetically confined coastal water. This model accounts the behavior of material after release from the hopper dredger. It is shown that the model describes the qualitative feature of prototype dumping process and its response.

• Ocean and Polar Research
• /
• v.30 no.4
• /
• pp.379-399
• /
• 2008

Spatial-temporal variations in physiochemical water qualities (temperature, salinity, DO, SPM, POC and nutrients) of surface and bottom waters were investigated along the mid-western coastal area (Taean Peninsula to Gomso Bay) of Korea. Spatial distribution patterns of temperature and salinity were mostly controlled by the physical mixing process of freshwater from Geum River and/or Gyunggi Bay with nearby coastal water. A strong tidal front is formed off Taean Peninsula during spring and summer. Seasonal variations in nutrient concentrations, lower in spring and summer and higher in fall and winter, are primarily regulated by magnitude of phytoplankton occurrence rather than freshwater loadings into the bay. Based on seasonal and spatial variability of physicochemical parameters, water quality of the study area can be divided into four water masses; Gyunggi Bay-influenced Water Mass (GBWM), Geum River-influenced Water Mass (GRWM), Yellow Sea Bottom Cold Water Mass (YSBCWM) and Cheonsu Bay Water Mass (CBWM). Water quality of the GBWM (Taean Peninsula coastal area), which has relatively low salinity and high concentrations of nutrients, is strongly controlled by the Gyunggi Bay coastal water, which is under influence of the Han River freshwater. In this water mass, the mixed layer is always developed by strong tidal mixing. As a result, a tidal front is formed along the offshore boundary of the mixed layer. Such tidal fronts probably play an important role in the distribution of phytoplankton communities, SPM and nutrients. The GRWM, with low salinity and high nutrients, especially during the flood summer season, is closely related to physiochemical properties of the Geum River. During the flood season, nutrient-enriched Geum River water mass extends up to 60 km away from the river mouth, potentially causing serious environmental problems such as eutrophication and unusual and/or noxious algal blooms. Offshore (<$30{\sim}40m$ in water depth) of the study area, YSBCWM coupled with a strong thermocline can be identified in spring-summer periods, exhibiting abundant nutrients in association with low temperature and limited biological activity. During spring and summer, a tidal front is formed in a transition zone between the coastal water mass and bottom cold water mass in the Yellow Sea, resulting in intensified upwelling and thereby supplying abundant nutrients to the GBWM and GRWM. Such cold bottom water mass and tidal front formation seems to play an important role in controlling water quality and further regulating physical ecosystem processes along mid-western Korean coastal area.

• Journal of the Korean GEO-environmental Society
• /
• v.11 no.6
• /
• pp.77-83
• /
• 2010

In this study, we tried to determine any detrimental effects on water quality when bottom ash obtained from a coal-fired power plant intended to be used as a fill material in construction sites. Physical-chemical properties of bottom ash were determined using proximate analysis, elemental analysis, XRD, and XRF. Classification of bottom ash as a waste material and soil contamination due to the use of bottom ash were performed by Korea waste standard leaching test and soil toxicity test, respectively. Results of leaching tests were compared to the regulations for water quality and groundwater quality and no harmful effects on water quality were found. Most of heavy metals in leachate were below detection limits but trace amount of $Cr^{6+}$ was found. However, concentration of $Cr^{6+}$ was below the regulation criteria. Column leaching tests indicated that concentrations of Pb and Zn were slightly higher than regulations but below regulations within 1 PVE, but concentrations of sulfate were 10 times higher than regulation and thus, the required time to reach regulation was almost 8 PVE.