• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.19 no.5
• /
• pp.436-445
• /
• 1986

As the second part of the studies on the utilization of polyunsaturated lipids in sardine oil as nutritional or medical supplement, the conditions of lipid extration and concentration, refining, and storage stability of EPA-condensed sardine oil were investigated. In extraction of lipids, solvent ratios of chloroform-methanol mixture(2:1 v/v) affected the final content of unsaturated lipid in extracted oil and recovery. Stepwise solvent fractionation method at various low temperatures was effective to concentrate polyenoic acids like EPA and DHA when acetone or acetone-methanol mixture, added in the ratio of 1:5 (v/v) was applied step by step to different temperatures at 0 to $-35^{\circ}C$. Addition of 1 to $5\%$ (v/v) of water to acetone was also benefit to raise EPA content but that resulted in reducing the yield of condensed oil from $65\%\;to\;28\%$. Concentration rate of polyenoic acids by solvent fractionation in lipid-actone solution (1:5, v/v) at 0 to $-30^{\circ}C$ seemed limited to $5{\sim}8\%$ in fatty acid composition depending on the initial content of those polyenoic acids in the sardine oil. During the extraction, concentration, and alkaline treatment, oxidation was rapidly induced but oxidation products could be thoroughly removed on the process of deceleration and peroxide elimination. To stabilize the reactive polyenoic acid condensed oil during the storage, stuffing nitrogen gas was essential to expel dissolved oxygen in oil or to seal the oil from open air, and the addition of antioxidative agents as BHA and tocopherols were greatly helpful to extend the storage life.

• Journal of Korean Society of Environmental Engineers
• /
• v.36 no.9
• /
• pp.641-647
• /
• 2014

In this study, sludge waste which has a difficulty in treating it was used to manufacture a fiber type of biosorbent. To solve the problems such as the release of organic pollutants and the difficulty in separating solid from treated water, entrapment method using Ca-alginate was used to immobilize sludge waste. Considering ease of manufacture as well as improvement of adsorptive ability, the biosorbent was manufactured in the form of fiber type. Optimum immobilization condition for minimizing the amount of alginate used and maximizing the performance of biosorbent was determined to be 10 g/L alginate concentration, 40 g/L sludge concentration, and 0.3-0.4 mm fiber diameter. The maximum Cd(II) uptake of the biosorbent was 60.73 mg/g. Pseudo-second-order kinetic model and Langmuir isotherm model adequately described the dynamic and equilibrium behaviors of Cd(II) biosorption onto the biosorbent, respectively. In conclusion, sludge waste generated from wastewater treatment process is a cheap raw material for the manufacture of biosorbent which can be used to remove toxic heavy metals from industrial wastewaters efficiently.

• Journal of the Korean Ceramic Society
• /
• v.39 no.5
• /
• pp.511-516
• /
• 2002

Hexagonal $YMnO_3$ thin films were prepared from $Y(NO_3)_3{\cdot}5H_2O$ and $Mn(CH_3CO_2)_2{\cdot}4H_2O$ as starting materials on the Si(100) substrates by the sol-gel method. The crystal structure and the electrical properties of the $YMnO_3$ thin films were investigated as a function of heat treatment temperature, the amount of water(Rw) of hydrolysis and the addition of catalysis. The crystallization of the $YMnO_3$ thin film began at 700${\circ}C$ and completed at 800${\circ}C$ for 1 h. The c-axis (0001) preferred orientation of hexagonal $YMnO_3$ was detected for the $YMnO_3$ thin films with Rw=6 and that was decreased for the $YMnO_3$ thin films with Rw=1 and Rw=12. The crystallinity and preferred orientation of the $YMnO_3$ thin films were depended on the addition of acid and/or alkali catalysis, which, in turn, the preferred orientation of c-axis was decreased and the orthorhombic phase of $YMnO_3$ was detected to the specimens with the addition of catalysis. The $YMnO_3$ thin film with Rw=6 showed good leakage current density of $1.2{\times}10-8 A/cm^2$ at the applied voltage of 0.2V and the leakage current density was not changed drastically with applied voltage.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.38 no.9
• /
• pp.1265-1270
• /
• 2009

Pathogens contaminated on the surface of utensils could contribute to the occurrence of outbreaks due to cross-contamination to foods during the food preparation process. Therefore, the efficacy of chemical sanitizers (chlorine-based and alcohol-based commercial sanitizers) and dry-heat ($71^{\circ}C$) on inhibiting biofilms of five foodborne pathogens (Escherichia coli O157:H7, Salmonella Typhimurium, Pseudomonas aeruginosa, Listeria monocytogenes, and Staphylococcus aureus) on the surface of stainless steel and polypropylene were investigated in this study. Initial populations of pathogens were 8.8$\sim$9.3 and 9.4$\sim$10.3 log CFU/coupon on the surface of stainless steel and polypropylene coupon, respectively, and these populations were not significantly reduced when they were treated with water for 5 min at room temperature. Treatments with chlorine sanitizer and dry-heat were not effective on inactivating pathogens on the surfaces of stainless steel and polypropylene. In contrast, treatments with alcohol sanitizer were very effective on inactivating pathogens on the surfaced of stainless steel and polypropylene. Reduction levels ranged from 3.4 to 6.4 log and from 5.5 to 7.4 log CFU/coupon in stainless steel and plastic coupons, respectively. From these results, alcohol-based sanitizer could be used as a potential way for controlling microbial contamination on the surface of utensils, cooking equipment, and other related environments.

• Journal of Bio-Environment Control
• /
• v.19 no.4
• /
• pp.217-222
• /
• 2010

Bark is a general medium for potted Cymbidium in Korea, but it is difficult to shake off or eliminate the medium from the roots before exporting the potted plants. This working process can injure the roots and then deteriorate plant marketability. This study was carried out to select the optimum medium easier to eliminate from the roots instead of bark and the optimum amount of applied fertilizer to improve the plant growth. Cymbidium young plants 'Honey Hot' and 'Desert Look' were planted in pots with bark, cocochip, and peatmoss. The plants were treated with 2, 4, and 6 g of slow release fertilizer. The plant growth characteristics were investigated in the first and second years during production period of three years. The medium characteristics and mineral nutrient content of the leaves were also examined in the second year. In the first year, the plant growth of 'Desert Look' was improved in all peatmoss treatments more than bark. 'Honey Hot' showed the highest plant growth values in the bark treatment. In the second year, the plant growth of the two cultivars was improved in peatmoss. Cocochip treatments showed the lower plant growth values than bark and peatmoss in the first and second year. There was no significant difference among fertilizer amounts in all the media. The higher CEC values of peatmoss medium resulted to higher capacity to hold more nutrients than bark, and the nutrient retention of the peatmoss improved the plant growth. The higher K and Ca contents in the leaves would contribute to improve the plant growth. Consequently, it would be possible to use peatmoss instead of bark for Cymbidium young plants, but there must be always attention to appropriately water the medium and manage the moisture.

• Journal of the Korean Society of Costume
• /
• v.44
• /
• pp.181-199
• /
• 1999

The industry of modern clothing has deviated from the overflow of commercialism and the standardization and nowadays is going toward pursuing art, creativity, and high added value. This trend brings the return of the natural materials from the synthetic textiles and increases the value of old and handmade fabrics. Finally, the handmade-paper, which is a natural material, comes to be reconsidered as a new material for the clothing. Therefore, as the natural materials and the manufacture of handmade clothing are rising again, the qualitative improvement and globalization of clothing industry should be first realized through the developments of creative and various clothing materials and new expressing techniques. The above investigation and study have been synthesized and analyzed as follows: First, through the study on the origin of the paper clothing, its historical background and the process of its development, we've learned these two facts following : the paper clothing of the East in the past mostly had practiced meanings. On the other hand, in the West it had meanings which were raised the artist's emotions and beauty-consciousness to the artistic level by the various kinds of expressing methods. Second, handmade-paper was manufactured by the embedding method, which mixed mulberry pulp, gauze, corn, hair, sisal, silk and so on. It was found that handmade-paper had the affluent and proper texture as the clothing material and was be able to control the clarity through the variation of thickness. It was also confirmed that the creative and original texture with hand-worked molding beauty was obtained by the use of handmade-paper. Third, when the handmade-paper is used, the molding beauty of plane, relievo, and solid can be freely pursued, and various and effective molding conformation can be constructed by the effect of superposition and repetition. Also, because the maximum discretion from the various optional manufacturing methods is allowed, the molding beauty can be maximized when the clothes are manufactured with handmade-paper. Fourth, the gauze with strong drape was combined to overcome the stiffness and the tearing of the paper. As a result, the durability and the wearability of the paper were strengthened and thus the thus the applications as the clothing material were enlarged. In conclusion, in order to enhance the value, creativity, practicality, and artistic sense of the design for modern clothing, the clothes made of handmade-paper should be more studied. Moreover, for the generalization of paper clothes, the studies on the development of practical paper with paper with water resistance, post-treatment after dyeing, flexibility, and durability should be done. I really hope that this study will be the motive to provoke the possibility of handmade-paper as new clothing material in not only practical sense but also artistic sense.

• Applied Chemistry for Engineering
• /
• v.29 no.5
• /
• pp.604-612
• /
• 2018

Coptis chinensis Franch is a valuable traditional oriental medicinal plant used for the treatment of various diseases. The major factors affecting the content of bioactive compounds and the relationship between bioactive compounds and antioxidant capacities of Coptis chinensis Franch were poorly understood. Thus, effects of the solvent, temperature, and extraction time on the extraction yields of bioactive compounds and the antioxidant activity of C. chinensis Franch extracts were investigated in this work. Our cluster analysis indicated that the hydroalcoholic solvent (50% ethanol : 50% water) at $35^{\circ}C$ for 30 min (extract time) was the best extraction condition for a factory use because the highest level of bioactive compounds and antioxidant activities was achieved. Multiple linear regression analysis revealed that total phenolic content (TPC) contributed to the 1,1-diphenyl-2-picrylhydrazyl radical (DPPH) scavenging activity, while both total alkaloid content (TAC) and total flavonoid content (TFC) were responsible for ferric reducing antioxidant power (FRAP) activity. These results indicated that extraction conditions controlled the yield of bioactive compounds and the antioxidant activity of C. chinensis Franch, which can provide important information for the industrial extraction.

• Korean Journal of Environmental Agriculture
• /
• v.11 no.3
• /
• pp.201-208
• /
• 1992

Municipal landfill leachate, a major source of soil contamination and ground water pollution, causes serious environmental problems. To investigate the removal efficiency of pollutants in the leachate by sand, briquet ash, fly ash, and activated carbon columns, COD and some pollutants in the leachate passed through each column for 8 weeks were examined. Average COD removal efficiency for 8 weeks was 83%, 45%, and 43% by activated carbon, briquet ash and fly ash columns, respectively. COD was not effectively reduced by sand column. Average ${NH_4}\;^+$ removal efficiency for 8 weeks was more than 60% by ail columns. Hardness was effectively removed for 8 weeks by fly ash and activated carbon columns. Anoins including $PO_4\;^{3-}$, $CI^-$ and $SO_4^{2-}$ were not removed by all columns.

• Journal of Environmental Health Sciences
• /
• v.20 no.1
• /
• pp.62-67
• /
• 1994

Introduction : Recently, water and environmental pollution becomes serious social problem and high technology makes this pollution accelerate. Hydrogen sulfide, the main subject of our research, is one of the most dangerous air pollutant like SO$_x$ and NO$_x$. The major contaminant in coal gasification is H$_2$S, which is very toxic, hazardous and extremely corrosive. Therefore, control of hydrogen sulfide to a safe level is essential. Although commercial desulfurization process called liquid scrubbing is effective for removal of H$_2$S, it has drawbacks, the loss of sensible heat of the gas and costly wastewater treatment. Many investigations are carried out about high-temperature removal ol H$_2$S in hot coal-derived gas using metal oxide or mixed metal qxide sorbents. It was reported that ZnO was very effective sorbent for H2S removal, but it has big flaw to vaporize elemental zinc above 600\ulcorner \ulcorner As alternative, metal oxides such as CaO, $Fe_2O_3$, TiO$_2$ and CuO were added to ZnO. Especially, different results are reported for $Fe_2O_3$ additive. Tamhankar et al. reported SiO$_2$ with 45 wt% $Fe_2O_3$ sorbent is favorable for removal of H$_2$S and regeneration.

• Journal of the Korea Institute of Building Construction
• /
• v.18 no.5
• /
• pp.419-427
• /
• 2018

The purpose of this study is to recycle steel slag generated from the iron producing process and to use steel slag as a construction material which is currently landfilled Steel slag is subjected to aging treatment due to the problem of expansion and collapse when it reacts with water. The Slag Atomizing Technology (SAT) method developed to solve these problems of expanding collapse of steel slag. In this study, experimental study on the emergency repair mortar using the reducing slag, electric arc furnace slag and silicon manganese slag manufactured by the SAT method is Reduced slag was shown an accelerated hydration when it was replaced with rapidly-setting cement, and the rate of substitution was equivalent to 15%. It is shown that the electric furnace oxide slag is equivalent to 100% of the natural aggregate, and it can be replaced by 15-30% when the silicon manganic slag is substituted for the electric furnace oxide slag. With the above formulation, it was possible to design the rapidly repair mortar for road use. These recycling slags can contribute on achieving sustainability of construction industry by reducing the use of cement and natural aggregates and by reducing the generation of carbon dioxide and recycling waste slag.