• 한국자원식물학회지
• /
• 제19권1호
• /
• pp.97-104
• /
• 2006

온도 및 NaCl 등의 외부 환경인자에 노출되었을 때 나타나는 측백나무 종자의 발아특성을 조사하고 불량환경에 대한 내성 및 적정 환경조건을 알아보고자 본 연구를 실시하였다. 15, 20, 25, $30^{\circ}C$의 온도조건에서 NaCl 용액을 0, 500, 1,000, 2,000, 4,000ppm의 5수준으로 분주하여 종자발아특성 및 상대수분흡수율을 조사하였다. 발아율의 경우 $15^{\circ}C$ 온도에서 가장 높게 나타났으며 NaCl에 의한 감소의 폭도 가장 작았다. 반면, $30^{\circ}C$에서는 모두 현저히 낮게 나타났다. 휴면율과 고사율은 대부분 고온으로 갈수록 높게 나타났다. 특히, 휴면율은 $30^{\circ}C$에서 그 차이가 현저하였으며, 고사율에 비해서도 높은 수치를 보였다. 온도 및 NaCl의 농도에 대한 상호연관성을 알아보고자 two-way ANOVA 분석을 실시한 결과 두 요인 및 요인간 상호작용에서 유의성이 인정되었다(p<0.001). 평균발아일수는 온도 및 NaCl 농도가 증가함에 따라 대체적으로 증가하는 경향을 보여 발아가 지연되었음을 나타냈다. 그러나 $30^{\circ}C$에서는 NaCl의 독성에 의해 고사종자가 발생하여 증가 후 감소하는 경향을 나타냈다. 발아속도와 발아균일지수는 온도 및 NaCl 농도가 증가함에 따라 감소하였다. 상대수분흡수율은 $15^{\circ}C$에서 가장 높게 나타났으며, NaCl 농도가 증가함에 따라 감소하는 경향을 보였다. 또한 발아율, 발아속도 및 발아 균일지수와 높은 정(+)의 상관을 나타내었다. 결과적으로, 고온과 염류는 측백나무 종자의 발아를 저해하는 요인으로 작용하므로 발아율, 발아속도 및 발아균일지수의 감소를 줄이기 위해 노지 파종시 이들 요인에 대한 고려가 필요할 것으로 사료된다.

• 한국작물학회지
• /
• 제36권3호
• /
• pp.214-219
• /
• 1991

관계수온에 따른 벼 품종들의 출수일수, 주간엽 전개 소요일수, 주간총엽수 등을 조사하여 수온과 벼 품종들의 출수특성과의 관계를 구명하고자, 삼강벼 등 12개 품종을 공시하고, 찬물계속 흘려대기를 실시하여 동일 포장 내에서 수온의 차이를 둔 벼 내냉검정포에서 시험을 수행한 결과를 요약하면 다응과 같다. 1. 담수심을 5 cm로하여 찬물계속흘려대기를 실시할 때 관계수 정체시간은 3 시간 이었으며, 포장 내의 수온은 찬물유입구로부터 배수고를 향하여 거리가 밀어질수록 상승되었다. 대체로 기온이 높아짐에 따라 수온도 높아지는 경향이었고, 배수구 쪽의 수온은 벼의 영양생장기에는 기온보다 높았지만, 생식성장기에는 낮았다 2. 수온 상승에 따라서 주간엽의 전개속도는 빨라지는 경향이었으며, 품종별로는 복광벼, 상풍벼, YR3486-16-2 등은 민감하였으나 Janack, 밀양4002 등은 다소 둔감한 편이었다 3. 영양생장기에 비하여 생식성장기에 1엽전개 소요일수가 두드러지게 늘어난 품종은 Janack, Paro-white 등이 었 다. 4. 1엽전개 소요일수의 품종간 차이는 수온이 높았던 영양생장기보다 상대적으로 수온이 낮았던 생식성장기에 켰다 5. 수온이 비슷한 조건일 때 수온의 차이에 의한 전체 공시품종의 평균 1엽전개소요일수의 영양생장기와 생식생장기의 생육단계간 차이는 인정되지 않았으며, 수온 13$^{\circ}C$-23$^{\circ}C$ 범위에서는 1$^{\circ}C$ 상승에 따라 1.3 일만큼 감소하는 것으로 추정 되었다. 6. 수온에 따른 주간총엽수의 증감은 품종간에 차이가 있었다. 수온이 상승됨에 따라 1 엽이 증가된 품종은 복광벼, 광명벼, China 988, YR3486-16 등이었고, 주간총엽수의 변화가 없었던 품종은 소백벼, Paro-white, 상풍벼, 풍산벼, 삼강벼, 밀양4002 등이었다 7. Janack 품종은 수온의 상승에 따라 주간총엽수가 증가되면서, 출수일수도 늘어났지만, 그밖의 품종들은 수온 차이에 의한 주간총엽수의 변화와는 관계없이 수온 상승에 따라 출수일수가 단축되었는데, 그 정도는 품종마다 달랐다.

• 산업경영시스템학회지
• /
• 제41권3호
• /
• pp.90-96
• /
• 2018

This paper proposed data driven techniques to forecast the time point of water management of the water reservoir without measuring manganese concentration with the empirical data as Juam Dam of years of 2015 and 2016. When the manganese concentration near the surface of water goes over the criteria of 0.3mg/l, the water management should be taken. But, it is economically inefficient to measure manganese concentration frequently and regularly. The water turnover by the difference of water temperature make manganese on the floor of water reservoir rise up to surface and increase the manganese concentration near the surface. Manganese concentration and water temperature from the surface to depth of 20m by 5m have been time plotted and exploratory analyzed to show that the water turnover could be used instead of measuring manganese concentration to know the time point of water management. Two models for forecasting the time point of water turnover were proposed and compared as follow: The regression model of CR20, the consistency ratio of water temperature, between the surface and the depth of 20m on the lagged variables of CR20 and the first lag variable of max temperature. And, the Box-Jenkins model of CR20 as ARIMA (2, 1, 2).

• KIEAE Journal
• /
• 제15권3호
• /
• pp.5-14
• /
• 2015

Purpose: Recently, according to climate changes, human health is exposed to danger over the world and they influence all fields of human society. Due to these climate changes, humans can be exposed to more frequent and extreme scorching heat and cold wave than the present. As precautions against these urban higher temperature and dryness, diverse methods are being sought. Among them, as measures to form cold islands, the evaporative cooling effect realistic to social and economic conditions was examined. Method: This study was conducted to analyze effects of temperature reduction and cooling according to injection quantity of minute water particles by using a blast sprayer as one of alternatives of alleviation of urban climate changes in outside space in summer. For this, through temperature difference in accordance with the injection quantity per hour of a day, a time zone representing the value of the highest temperature change was analyzed. Also, by analyzing temperature difference according to the injection quantity per daytime insolation, relation of amounts of insolation and evaporation was investigated. Temperature difference in accordance with distances at the highest temperature with the highest value in temperature changes was analyzed. Result: At the study result, about temperature, as injection quantity increase, temperature reduction was significant statistically at the highest temperature with the most insolation. A factor with the highest influence was judged to be the increase of the injection quantity. According to the injection quantity, it was predicted that $3.1^{\circ}C$ temperature reduction of a daily average in case of 0.16L/min, $3.5^{\circ}C$ temperature reduction of a daily average in case of 0.32L/min, and $4.4^{\circ}C$ temperature reduction of a daily average in case of 0.48L/min.

• 한국식품영양과학회지
• /
• 제27권5호
• /
• pp.903-907
• /
• 1998

Mass transfer characteristics during osmotic dehydration of mushrooms(Agaricus bisporus) in sugar solution were studied as a function of sugar concentration, immersion time and temperature, and the effect of osmotic dehydration on browning inhibition of air-dried mushrooms was also evaluated. Increasing the sugar concentration, immersion time and temperature increased moisture loss, sugar gain, molality and rate parameter. The changes of sugar gain and rate parameter were more significantly affected by concentration than by temperature of sugar solutions, while 1$0^{\circ}C$ increase in temperature or 10 Brix increase in concentration had the same effect on water loss. Water loss, sugar gain, molality were rapid in the first period of osmotic dehydration especially in the case of higher concentration and temperature of sugar solutions. Effects of osmotic dehydration in sugar solution(60 Brix, 8$0^{\circ}C$) with 18 min of immersion time(O.D.=0.099) rior to air dehydration on browning inhibition of dried mushrooms were more significant than blanching in water(8$0^{\circ}C$) with the same immersion time(O.D.=0.330) and the control (O.D.=0.559).

• 한국양식학회지
• /
• 제17권4호
• /
• pp.258-261
• /
• 2004

The Oxygen consumption of hybrid striped bass (Morone chrysops ♀ M. saxatilis ♂) was measured in relation to water temperature, salinity and photoperiod changes. Fish (574.0101.3 g) was individually exercised in a chamber for 24 h at 2$0^{\circ}C$, 24$^{\circ}C$ and 28$^{\circ}C$ with two salinity conditions (0 and 33 psu). Stepwise, the increase of water temperature induced a strong increase of the oxygen consumption. Salinity and photoperiod had an influence on the oxygen consumption of hybrid striped bass, even though there was not a consistent tendency between those.

• The Korean Journal of Ecology
• /
• 제27권6호
• /
• pp.369-373
• /
• 2004

The water strider, Gerris paludum insularis, was reared in a growth cabinet at two constant temperatures and ${\approx}20^{\circ}C$ under a 16:8 (L:D) photoperiod. Differences in head width among three temperatures of ${\approx}20^{\circ}C,\;25^{\circ}C\;and\;30^{\circ}C$ in G. paludum insularis, were compared. Temperature affected growth of head width of G. paludum insularis. There were highly significant differences among head width for three temperature regimes and the immature stages. It was found that head width is greater in $30^{\circ}C$ than $25^{\circ}C\;and\;{\approx}20^{\circ}C$. The growth quantity of the head width in ${\approx}20^{\circ}C$ shows the slowest increase, and $25^{\circ}C\;and\;30^{\circ}C$ were gradually increased in that order. The maximum ratio of growth quantity by each stage is in the first instar in all regimes. The growth rates of all regimes show an increase pattern.

• 한국자동차공학회논문집
• /
• 제1권1호
• /
• pp.14-21
• /
• 1993

The effect of coolant flow pattern on the metal temperature of the combustion chamber was studied in 1.5L and 1.8L gasoline engines. One of the main important points in the design of the water jacket is the increase of the coolant flow velocity. In this paper, the water jackets of the cylinder head and the cylinder block were visualized for the purpose of improving the coolant flow pattern. By the use of this technique, the optimal design of the size and th location of the water transfer fole was possible. And, to lower the metal temperatures of the thermally critical parts, the drilled water passages were employed. To investigate of effect of the improved flow pattern and the drilled water passages, the metal temperatures of the combustion chamber were measured. As a result of the temperature measurement, it was found out that both the change of flow pattern and the drilled water passages have significant effect on the reduction of the peak metal temperature.

• Structural Engineering and Mechanics
• /
• 제74권6호
• /
• pp.747-756
• /
• 2020

High-strength concrete (HSC) generally is made with high amount of cement which may release large amount of hydration heat at early age. The hydration heat will increase the internal temperature of slab and may cause potential cracking. In this study, slab specimens with a dimension of 600 × 600 × 100 mm were cast with concrete incorporating silica fume for test. The thermistors were embedded in the slabs therein to investigate the interior temperature development. The test variables include water-to-binder ratio (0.25, 0.35, 0.40), the cement replacement ratio of silica fume (RSF; 5 %, 10 %, 15 %) and fly ash (RFA; 10 %, 20 %, 30 %). Test results show that reducing the W/B ratio of HSC will enhance the temperature of first heat peak by hydration. The increase of W/B decrease the appearance time of second heat peak, but increase the corresponding maximum temperature. Increase the RSF or decrease the RFA may decrease the appearance time of second heat peak and increase the maximum central temperature of slab. HSC slab with the range of W/B ratio of 0.25 to 0.40 may occur cracking within 4 hours after casting. Reducing W/B may lead to intensive cracking damage, such as more crack number, and larger crack width and length.

• KIEAE Journal
• /
• 제16권3호
• /
• pp.25-34
• /
• 2016

Purpose: The temperature in Seoul has risen 3 times more than the average global temperature increase for the past 100 years. Today, summer starts 15 days earlier than the early 20th century and is 32 days longer. This tendency causes rapid increase of cooling energy demand. Following this effect, seawater heat resources are to be used as an countermeasure for global warming. Incheon Port near the Western Sea has the lowest water temperature in the winter in South Korea in which it is suitable to use seawater cold heat resources. Method: The cold heat resource is gained from seawater when the water temperature is the lowest in the winter time and saved in a seasonal thermal storage. This can be used as cold heat resource in the summer time. A heat exchanger is essential to gain seawater cold energy. Due to this necessity, sea water heat resource heat exchangers are modeled by heat transfer equations and the fluid characteristics are analyzed. Also, a CFD (computational fluid dynamics) program is used to conduct simulation on the fluid characteristics of heat exchangers. The analyzed data of deducted from this process are comprehensively analyzed and discussed. Result: Regarding the performance of the heat exchanger, the heat exchanger was operated following the prediction within the range of heat transfer rate of minimum 3.3KW to maximum 33.6KW per device. In the temperature change analysis of the heat exchanger, fluid analysis by heat transfer equations almost corresponded to the temperature change by CFD simulation. Therefore, it is considered that the results of this study can be used as design data of heat exchangers.