• Journal of Microbiology and Biotechnology
• /
• v.16 no.7
• /
• pp.1060-1067
• /
• 2006

This study was undertaken to determine the effect of reservoirs on water quality and the distribution of pathogenic and indicator bacteria in a drinking water distribution system (total length 14km). Raw water, disinfected water, and water samples from the distribution system were subjected to physicochemical and microbiological analyses. Most factors encountered at each season included residual chloride, nitrate, turbidity, and phosphorus for heterotrophic bacterial distribution, and hardness, heterotrophic bacteria, sampling site, and DOC (dissolved organic carbon) for bacteria on selective media. No Salmonella or Shigella spp. were detected, but many colonies of opportunistic pathogens were found. Comparing tap water samples taken at similar distances from the water treatment plant, samples that had passed through a reservoir had a higher concentration of heterotrophic bacteria, and a higher rate of colony formation with 10 times as many bacteria on selective media. Based on the results with m-Endo agar, the water in reservoirs appeared safe; however, coliforms and opportunistic pathogenic bacteria such as Pseudomonas aeruginosa were identified on other selective media. This study illustrates that storage reservoirs in the drinking water distribution system have low microbiological water quality by opportunistic pathogens, and therefore, water quality must be controlled.

• Journal of Yeungnam Medical Science
• /
• v.5 no.1
• /
• pp.69-75
• /
• 1988

The drinking water in the apartment is stored in reservior tank and thereafter supplied each household. In case the drinking water is stored too long or insanitary, tap water might change in quality. This study was carried out to evaluate the physico-chemical and microbiological conditions of 36 samples of tap water of apartments compared to 18 samples of tap water of independence houses in Taegu City from May to October, 1987. Main findings are summarized as follows : PH values were within normal range in all samples. Samples less than 0.2ppm in residual chlorine accounted for 16.7% in the appartment and 5.6% in the independence house. Nitrite nitrogen was detected 2.8% of apartment samples only. Among the total of 54 samples, 11.1% of the apartment and independence samples were over the normal value in standard plate count. Samples more than 1.8 of most probable number(MPN) accounted for 27.8% in the apartment and 33.3% in the independence house. In result of test for residual chlorine, nitrite nitrogen, standard plate count, and MPN, the proportion of the samples revealed inappropriated in respect of drinking water standards. In case of all sorts of tests was 2.7% in apartment and nothing in independence houses, in case of 3 sorts of tests was 2.7% in apartment and 5.6% in independence houses, in case of 2 sorts of tests was 8.3% in apartment and 5.6% in independence houses, and in case of only 1 test was 25.0% in apartment and 22.2% in independence houses. Correlation between residual chlorine and standard plate count, and between standard plate count and MPN were observed. It was found that the more years since construction of apartment were, the worse tap water was in quality.

• Journal of Korean Society on Water Environment
• /
• v.32 no.6
• /
• pp.600-627
• /
• 2016

Korea is one of the countries with a large veterinary antibiotics market, although antimicrobial resistance in bacteria is becoming a serious issue in many countries. The Korean government started to take interest in estimating the effects of livestock manure on rivers and agricultural soils and in monitoring of heavy metals, organic pollutants and antibiotics in the ambient water and soil. In this paper, pre-treatment methods to separate the selected antibiotics from solid samples were reviewed. It is essential to select an efficient and appropriate procedure for pre-treatment due to the high proportion of proteins and organics in biosolid samples. Pre-treatment consists of extraction followed by clean-up. Initially, homogenized samples were extracted by sonication, mechanical agitation or pressurized liquid extraction with methanol/acetonitrile/water mixture under acidic/basic conditions depending on the compound. However, aminoglycosides and colistin were extracted with 5% trichloroacetic acid and HCl, respectively. Since the ${\beta}-lactams$ are easily decomposed in acidic and basic conditions, they were extracted in neutral pH. Filtration with a membrane (pore size, $0.2{\mu}m$) or solid phase extraction with HLB and methanol, as eluents, was normally applied for the clean-up. At least, three different pre-treatment procedures should be adopted to screen all the selected antibiotics in solid samples.

• Food Science and Preservation
• /
• v.4 no.2
• /
• pp.155-162
• /
• 1997

This work was designed to determine the effect of steaming-Pretreatment on Physicochemical and functional properties of roasted Polygonatum odoratum roots. Steaming treatments led to some reduction in the contents of water solubles, such as total solid, reducing sugar and free-amino nitrogen of the unroasted samples. Moreover, roasting processing caused decrease in reducing sugar and free-amino acid, with increase in total soluble solid and browning color of the samples, which showed the dependence of steaming treatment as well as roasting temperature. Electron-donating ability and nitrite-scavenging ratio of the samples were also highly developed along with roasting processing at 17$0^{\circ}C$ within 35min. Considering the physicochemical and some functional parameters of water extracts of roasted samples, roasting at above 14$0^{\circ}C$ for over 55min or at 17$0^{\circ}C$ for around 35min was recommendable for the higher quality of Polygonatum odoritum tea, which conditions were similarly adapted for both steamed and unsteamed samples.

• Korean Journal of Microbiology
• /
• v.44 no.3
• /
• pp.244-250
• /
• 2008

To evaluate bacteriological water quality, samples were taken from drinking water dispensers placed at S company (S-C) and U highschool (U-H) in Ulsan. The medians of heterotrophic plate counts (HPCs) were 53 CFU/ml for the 74 water samples of S-C and 80 CFU/ml for the 36 cold water samples of U-H, and 38% of the S-C and 42% of the U-H samples showed HPC bacterial concentrations higher than 100 CFU/ml. Coliform bacteria were detected from one sample of S-C. To determine the major source of bacterial contamination, water samples were taken daily for $6\sim8$ days from the bottled water containers as well as the faucets of an experimental water dispenser. While the average HPCs in the bottled water containers were 33 CFU/ml for the first and 132 CFU/ml for the 2nd analysis, the HPC concentration in the cold water samples was 1,022 CFU/ml for the 2nd analysis. These results suggest that the majority of bacteria detected in the cold water samples were originated from the biofilms on the surface of water passages within the water dispensers. There was no significant increase in HPC bacterial concentrations within the bottled water container after installation on the water dispenser. We could isolate and tentatively identify 3 genera 6 species of Gram-positive and 7 genera 7 species of Gram-negative bacteria from the plate count agar plates of U-H samples. Among the isolates, 72% were observed as Gram-positive, and Micrococcus spp. was the most abundant with 54% of the total, followed by Sphingomonas paucimobilis with 16%. It appears that most of the HPC bacteria detected in water dispensers originate from indoor airborne bacteria, which may play important roles in the formation of biofilms on the surface of water passages within the water dispensers.

• Corrosion Science and Technology
• /
• v.15 no.4
• /
• pp.166-170
• /
• 2016

The combined process of porous type anodizing and desiccation treatment was applied to improve wettability of A1050 aluminum alloy. The water contact angles of anodized samples were increaseds considerably with desiccation treatment. However, there was no considerable effect of polishing and anodizing time on water contact angle. The corrosion behavior with the treatments was investigated electrochemically. The corrosion resistance of the samples in 3.5 mass% NaCl solutions increased with higher contact angle. Anodized and desiccated samples showed better corrosion resistance than un-desiccated samples around rest potential region.

• Korean journal of food and cookery science
• /
• v.24 no.6
• /
• pp.849-855
• /
• 2008

DPPH radical scavenging activities were 66.80% by hot water extract and 41.86% by 80% methanol extract. Inhibitions of angiotensin I-converting enzyme (ACE) were 91.09% by hot water extract and 75.20% by 80% methanol extract. In this study, Sulgidduk samples were prepared with 1, 3, 5, and 7% concentrated sweet pumpkin powder (CSPP), and a control were examined for quality characteristics such as moisture content, water activity, color, textural characteristics, and sensory qualities, in order to determine the optimal ratio of CSPP in the formulation. The samples containing CSPP exhibited significantly higher moisture content than the control group. Water activity was not significantly different among the Sulgidduk samples. For the color, the control group presented significantly higher lightness as compared to the samples containing CSPP. The samples containing 1 and 3% CSPP had significantly higher greenness than the samples containing 5 and 7% CSPP. Yellowness increased as the level of CSPP content increased. In terms of textural characteristics, hardness, gumminess, and chewiness were highest at the 1% substitution level, while lowest at the 3% level. The CSPP samples presented significantly higher adhesiveness, springiness, and cohesiveness than the control group. In the consumer acceptance and characteristic intensity rating test, the control group showed significantly higher color and flavor as compared to the CSPP samples. Pumpkin flavor, delicious taste, and off-flavor increased with increasing amounts of CSPP. Softness, overall acceptability, and gumminess were not significantly different among the various samples tested. Sweetness was highest at the 5% substitution level, while lowest at the 1% level. In conclusion, the results indicate that substituting $3{\sim}5%$ CSPP to Sulgidduk is optimal, providing good DPPH radical scavenging activity and inhibition of ACE as well as reasonably high overall acceptability.

• Environmental Analysis Health and Toxicology
• /
• v.29
• /
• pp.19.1-19.10
• /
• 2014

Objectives Lysosome is the cell-organelle which is commonly used as biomonitoring tool in environmental pollution. In this study, the lysosomal proteomic of the yeast Saccharomyces cerevisiae was analyzed for utilization in the detection of toxic substances in mine water samples. Methods This work informs the expression of lysosomal proteomic in yeast in response with toxic chemicals, such as sodium meta-arsenite and tetracycline, for screening specific biomarkers. After that, a recombinant yeast contained this biomarker were constructed for toxic detection in pure toxic chemicals and mine water samples. Results Each chemical had an optimal dose at which the fluorescent protein intensity reached the peak. In the case of water samples, the yeast showed the response with sample 1, 3, 4, and 5; whereas there is no response with sample 2, 6, and 7. Conclusions The recombinant yeast showed a high ability of toxic detection in response with several chemicals such as heavy metals and pharmaceuticals. In the case of mine water samples, the response varied depending on the sample content.

• Environmental Analysis Health and Toxicology
• /
• v.21 no.3 s.54
• /
• pp.283-289
• /
• 2006

In recent years, there has been an increase in consumer demand for bottled waters. There is a perception that consumption of natural mineral water represents a healthy life style and that these products are relatively safe. In this study, the microbiological quality of 39 samples of bottled water, purchased from retail store in Korea, was investigated during the 2005. Applying pour plate method, the 1 mL of water samples were analyzed for the presence and enumeration of total general bacteria and Pseudomonas spp.. Nineteen samples representing 9 brands of bottled water contained general bacteria ($1.54{\times}10^2$ CFU/mL). In addition four samples contained Pseudomonas spp. and Camamonas acidovorans. The susceptibility of the strains tested against 25 antimicrobial agents, Pseudomonas fluorescens were resistant to Lincomycin, Amoxacilin/Clavulanic acid and Cefazolin (> $100{\mu}g/mL$). Also Comamonas acidovorans were intermediate to Cephalothin and resistant to Cefoperazone.

• Bulletin of the Korean Chemical Society
• /
• v.16 no.7
• /
• pp.582-588
• /
• 1995

The preconcentration and determination of trace Cd(Ⅱ), Cu(Ⅱ), Pb(Ⅱ), Mn(Ⅱ) and Zn(Ⅱ) in water samples were studied by the precipitate flotation using La(OH)3 as a coprecipitant. The analytes were quantitatively coprecipitated by adding 3.0 mL of 0.1 M La(Ⅲ) solution in a 1,000 mL water sample and adjusting the pH to 9.5 with NaOH solution. After the addition of the 1:8 mixed surfactant solution of each 0.1% sodium oleate and sodium lauryl sulfate, the solution was stirred with a magnetic stirrer for 10 minutes. The precipitates were floated to the surface by bubbling with nitrogen gas and collected in a small sampling bottle. The precipitates were dissolved in nitric acid and then the solutions were diluted to 25.00 mL with a deionized water. The analytes were determined by flame atomic absorption spectrometry. This procedure was applied to the waste water analysis. This technique was simple, convenient and especially rapid for the analysis of a large volume of sample. And also, from the recoveries of better than 92% which were obtained from real samples, this method could be judged to be applicable to the preconcentration and quantitative determination of trace elements in water samples.