• 한국치위생학회지
• /
• 제12권3호
• /
• pp.465-470
• /
• 2012

Objectives : In general, the active of volatile compounds which become usually known as the principal ingredient of bad breath is closely connected with temperature. In this study, an investigation was made into the correlation between oral malodor and the temperature of rinsing water. Specifically, an analysis was made of saliva in rinsing water with relation to amount, flow and pH. In addition, a calculation was made of O'Leary index. The results are expected to be basic data for oral malodor reduction plans. Methods : A total of 30 women who are in their 20s without any systemic disease and teeth braces and non-pregnant were chosen for the study. The research was carried during 3 weeks from 28 Mar to 11 Apr in 2011. Results : Saliva was not significantly affected by the temperature of rinsing water, in connection with saliva amount, saliva flow and saliva pH. The O'Leary index and oral malodor was the highest in warm water, but the subjects preferred rinsing with cold water. Conclusions : In conclusion, oral malodor was found to be reduced in inverse proportion to the temperature of rinsing water. Thus, it is recommended to rinsing water with warm water after tooth brushing.

• 한국학교보건학회지
• /
• 제8권2호
• /
• pp.305-314
• /
• 1995

A comparative study on the effects of the water fluoridation program and fluoride mouth rinsing program in the elementary school children. This study was performed to compare the oral health status of permanent teeth for children of the caries prevention effects by using methods of fluoride 309 children for water fluoridated program, 240 for fluoride mouth rinsing program and 248 for control group. The DMFS rate, DMFT index, soft and hard deposite rate were analysed from the oral examination. And 300 questionares from the parents who lived in Cheong ju city were evaluated to see the situations of using the tap water. The results were as follows; 1. Caries experience rate in permanent dentition was the lowest in fluoride mouth rinsing group. 2. It was estimated that soft deposite rate was comparatively low in the fluoride mouth rinsing group but calculus deposite rate was no significant difference in each other groups. 3. The 72.0 percentage of parents who lived in non fluoridated water area were misunderstood that they lived in water fluoridated area. 4. The 66.8 percentage of residents used the piped water as drinking water. 5. It was recommended that fluoride mouth rinsing program was suggested in rural area, on the other hands, toothbrusing program in urban area with water fluoridation to prevent the dental caries for school children.

• 청정기술
• /
• 제5권1호
• /
• pp.78-85
• /
• 1999

우리나라 고유의 식품산업으로서 최근 급격한 성장을 보이고 있는 김치제조 산업에서 원재료인 배추를 절인 후 염을 세척하는 과정에서 다량의 폐세척수가 발생한다. 본 연구에서는 세척수 사용량의 최적화를 통해 근원적으로 폐세척수 발생량을 저감하기 위한 접근 방법이 고찰되었다. 세척공정을 최적화하기 위한 방법으로 실제공장의 향류식 연속 세척공정 대신 연속 회분식 세척공정을 통한 모사실험이 수행되었으며 실제공정을 효과적으로 모사할 수 있었다. 동일한 원산지 배추에 대해 염절임 후 임의 추출된 표본간의 세척효율의 차이는 미미하였으나 배추의 원산지별 특성에 따라서는 세척효율면에서 상당한 차이를 보였다. 세척수 양을 3.3 L/head(포기)에서 2.7 L/head(포기)까지 감소시켰을 경우에 배추에 남아있는 COD, 탁도, 전기전도도, $Na^+$, $Cl^-$의 농도는 거의 유사하거나 완만하게 증가하는 경향성을 보였으나 세척수량을 2.4 L/head이하로 감소시킴에 따라 세척효율의 악화가 뚜렷이 나타났다. 관능시험에서 세척수의 사용량을 2.7 L/head까지 줄여도 김치의 품질에는 아무 영향이 없었으나 세척수 양을 2.4 L/head이하로 감소시켰을 경우에는 김치의 염분 농도가 너무 높아 젖산 발효율이 저하되었고 짠맛과 함께 이미가 느껴졌다. 결국 제품의 품질에 전혀 영향을 미치지 않는 범위내에서 세척수 사용량을 약 18%까지 절감할 수 있는 것으로 사료되었다.

• 한국농공학회지
• /
• 제31권1호
• /
• pp.96-105
• /
• 1989

This laboratory study was performed to produce basic data for the estimation of water requirements for desalinization, through analyzing changes of the electrical conductivity and the exchangeable sodium percentage during the desalinization of reclaimed tidelands. Desalinization experiments were carried out by two water management practices, namely, the leaching method by subsurface drainage and the rinsing method by surface drainage, using samples of silt loam soil and silty clay loam soil collected in reclaimed tidelands. The results obtained from this study were summarized as follows : 1. The sample soils used in this study were saline-sodic soils with the high electrical conductivity and the high exchangeable sodium percentage. 2. Changes of the electrical conductivity and the exchangeable sodium percentage with water requirements for desalinization showed a similar tendency in the desalinization experiment by the same water management practice. 3. The regression equation between the relative electrical conductivity(EC/EC) and water requirements for desalinization(Dw/Ds) could be described by Dw/Ds=O. 29x(EC/EC.) -0.982 (Leaching method), Dw/Ds=3. 678X0. 030(EC/EC ) (Rinsing method). 4. The regression equation between the relative exchangeable sodium percentage (ESP/ESP ) and water requirements for desalinization (Dw/Ds) could be expressed in Dw/Ds = 0.039 x (ESP/ESP. ) - 1. 134 (Leaching method), Dw/Ds=7. 197X0. 024(ESP/ESP ) (Rinsing method). 5. It was estimated that water requirements for the adequate desalinization would be Dw/Ds=0.3 (Leaching method) and Dw/Ds=3.0 (Rinsing method)

• 한국의류학회지
• /
• 제21권2호
• /
• pp.251-261
• /
• 1997

According to consumer's washing behavior, the washing efficiency of three different types of washing machines-pulsator, agitator, and drum was studied. Their detergency, rinsing efficiency, and the degree of fabric damage, tangle, and wrinkle were evaluated. The results showed that efficient washing capacity was different from the specified capacity of washing machine. Detergency and rinsing efficiency frere apparently decreased when more than 50% of capacity was loaded in washing machine of pulsator type, and 80% for agitator or drum types. They were also affected by detergent adding methods, and decreased in the order of water-detergent-washing load> washing load-detergent-water> washing load-water-detergent. Rinsing efficiency was significantly improved when the rinsing temperature was set above washing temperature. In addition, it was revealed that detergency, fabric damage, wrinkle, and tangle were highly correlated. The relationships between detergency and tangle were different for different types of washing machine. Positive relationships were found for agitator and drum types, whereas negative for pulsator type.

• 한국식품위생안전성학회지
• /
• 제29권2호
• /
• pp.117-122
• /
• 2014

습식 쌀가루의 제분과정 중에서 유해 미생물의 증식을 억제하기 위하여 침지공정이나 세척공정에 사용되는 물에 천연살균제인 쌀뜨물발효액 혹은 화학살균제인 chlorine dioxide (CD)와 sodium benzoate (SB)를 각각 첨가하여 침지공정이나 세척공정 중 쌀에 잔류 미생물의 증식억제 정도를 파악하였다. 또한 원료 쌀의 잔류 미생물을 제거하기 위하여 침지공정 전과 후 세척 횟수별 잔류 미생물의 제거 정도를 파악하였다. 쌀뜨물발효액, CD, 혹은 SB는 백미 내 잔류 가능성이 있는 잠재적 위해 세균들로 선정된 S. typhimurium, E. coli, 그리고 B. cereus 표준균주들에 대하여 액체배양액 내에서 각각 첨가된 농도가 증가함에 따라서 이들 살균제들의 항균력이 비교적 급격히 증가하는 경향을 나타내었으며, 쌀뜨물발효액이나 SB와 비교하였을 때 CD가 액체배양액 내에서 가장 높은 항균 효과를 나타내었다. 또한 쌀뜨물발효액, CD, 혹은 SB는 침지과정 중에 각각 첨가된 농도가 증가하면서 백미 내 잔류세균에 대하여 이들 살균제들의 항균력이 증가하는 경향을 나타내었다. 그러나 이러한 현상은 위에서 언급한 S. typhimurium, E. coli, 그리고 B. cereus 표준균주들에 대하여 액체배양액 내에서 이들 천연살균제와 화학살균제들이 나타낸 항균력보다 낮게 나타났다. 한편 백미 검체의 침지 전과 후 세척 횟수에 따른 백미 잔류 세균의 제거효과는 백미 검체를 침지하지 않고 세척하였을 때가 가장 높은 효과를 나타내었다. 그리고 세척을 한 후 침지를 시켰을 때는 세척 횟수가 증가하여도 잔류 세균의 수가 비슷한 정도로 나타났다. 그러므로 결론적으로 백미의 살균 및 제균 방법으로는 살균제에 의한 살균방법보다는 물 등으로 세척하여 잔류 세균을 제거하는 것이 보다 안전하고 효율적인 방법이 될 수 있을 것으로 사료된다.

• 한국의류학회지
• /
• 제18권1호
• /
• pp.23-30
• /
• 1994

The objective of this study was to analyze the effect of the dissolution of detergent on washing and rinsing efficiency, and the possibility of saving detergent in washing. Washing and rinsing efficiency were reviewed in three different ways : A method was to input dissolved detergent by the use of rapid detergent dissolution instrument, B method was to input dissolved detergent beforehand, and C method was to input undissolved detergent. The results were as follows 1. A method > B method > C method was shown in detergency with washing time and three method's gaps were reduced because detergent dissolution effect was reduced by mechanical action in proportion of washing time. Especially, according to detergency of A method of 0.07% and C method of 0.1% was appeared approximately, saving detergent was expected by rapid dissolution of detergent. 2. A method > B method > C method was shown in detergency with washing temperature. As the washing temperature rose, the detergent reached chemically more activated state and become easily soluble. It resulted for the detergent to penetrate and adhere to laundry easily. 3. A method > B method > C method was shown in detergency with detergent concentration and C method was more sensitive than A, B method against change of detergent cocentration. Rapid detergent dissolution made it possible not only to enhance the washing efficiency but also to save the detergent because detergency of A method in low concentration is higher than that of C method. 4. A method $\geq$ B method > C method was shown in rinsing ratio with detergent input method. It indicated input dissolved detergent was advantageous in rinsing. 5. The result of anion surfactant concentration test of each process with detergent input method was shown like that A method In B method > C method in washing and reverse result was shown in rinsing. The anion surfactant concentration of C method was low during washing but high during rinsing. This was identical with previous results which shown the washing and rinsing efficiency improved with dissolved detergent usasge. 6. C method > B method > A method was shown in the degree of remaining detergent after rinsing. There was no remaining detergent after second rinsing in A and B method, but in C method four rinsings were required for the same result. Consequently, in A and B methods, less water and electricity were used, and less abrasion of cloth.

• 한국환경과학회지
• /
• 제25권6호
• /
• pp.817-827
• /
• 2016

The resistance in series model has been frequently used for determination of various filtration resistance to correctly understand the membrane fouling behaviour in MBR (membrane bio-reactor) for wastewater treatment. The cake layer resistance ($R_c$) which is commonly determined by calculation of flux dataset that are obtained empirically before and after removing the cake layer on membrane surface. However, the calculated Rc values are very dependent on the cleaning methods adapted for removal of cake layer. This study investigated how the various cleaning options affect $R_c$. Seven different cleaning methods were employed: i) ultrasonication (100 W, 10 min), ii) ultrasonication (200 W, 60 min), iii) ultrasonication (400 W, 120 min), iv) water rinsing in a shaker (100 rpm, 10 min), v) water rinsing in a shaker (300 rpm, 60 min), vi) water rinsing, vii) sponge scrubbing. For the hydrophilic PES membrane, the cake layer removal efficiencies ranged from 64% to 10%, indicating that the removal of cake layer was highly dependent on the cleaning options. For the hydrophobic PVDF membrane, the cake layer removal efficiencies ranged from 79% to 97%. Consequently, a standardized method for cake layer removal to determine cake resistance ($R_c$) is needed for correct interpretation of the fouling phenomena.

• 대한환경공학회지
• /
• 제33권9호
• /
• pp.670-676
• /
• 2011

인위적 중금속 오염 토양은 중금속용액과 토양 간 흡착평형, 여과 또는 원심분리, 건조과정을 거쳐 완성되어 토양세척 및 토양독성 실험에 널리 이용되고 있다. 그러나 많은 문헌에서 실험에 사용한 오염토양이 건조과정 이후 충분한 세척을 마친 후 사용되었는지 불분명하다. 본 연구는 중금속 오염 토양 제조 과정에서 최종 세척과정이 중금속 오염 농도에 미치는 영향을 파악하고자 하였다. 3가지 대표적 중금속 오염 토양 제조방법(슬러리 건조법, 평형 후 건조법, 여과 후 건조법)에 의한 중금속(Cd, Pb) 오염 농도 차이를 파악하고 이후 최종 세척과정이 제조 중금속 오염 토양 농도에 미치는 영향을 분석하였다. 중금속용액과 토양을 흡착평형 시킨 후 건조과정만을 거쳐 제조한 오염토양 내 중금속은 이후 단순 세척과정에서 50% 이상 용탈되는 것으로 나타났다. 중금속용액과 토양 간 흡착평형을 거쳐 중금속 오염 토양을 제조한 경우 실험 전 충분한 세척을 거치지 않는다면 이후 토양세척 및 토양독성 실험 결과에 지대한 영향을 미칠 것으로 예상된다. 그러므로 제조오염토양을 이용한 실험에서는 초기 중금속 농도 결정 시점을 중금속 흡착 완료 단계가 아닌, 흡착 후 충분한 세척이 완료된 이후 초기 토양중금속 농도로 결정하는 것이 바람직하다.

• 한국축산식품학회지
• /
• 제42권3호
• /
• pp.389-397
• /
• 2022

Carcass vascular rinsing and chilling involves infusing a chilled isotonic solution (98.5% water and a blend of mono- and di-saccharides and phosphates) into the vasculature immediately upon exsanguination. Primary purposes of carcass vascular rinsing are to (1) effectively remove residual blood from the carcass; (2) lower internal muscle temperature rapidly; and (3) optimize pH decline by effective delivery of glycolytic substrates in the rinse solution. Previous studies have revealed that the beef carcass vascular rinsing early postmortem positively affects meat quality, product shelflife, and food safety. Thus, the objective of this review is to provide a more comprehensive understanding of the physical and biochemical mechanisms associated with beef carcass vascular rinsing, focusing on the relationship between quality attributes (CIE L^*, a^*, b^*; chemical states of myoglobin; oxygen consumption and sarcomere length) and muscle metabolic response to various substrate solutions (Rinse & Chill^®, fructose, sodium phosphate, and dipotassium phosphate) that stimulate or inhibit the rate of glycolysis early postmortem. In addition, this review discusses the absence of metabolite residues (phosphorus, sodium, and glucose) related to the application of the chilled isotonic solution. This review primarily focuses on beef and as such extending the understanding of the mechanisms and meat quality effects discussed to other species associated with vascular rinsing, in particular pork, may be limited.