• Microbiology and Biotechnology Letters
• /
• v.31 no.2
• /
• pp.177-181
• /
• 2003

Eleven bacterial strains which are able to utilize terephthalic acid as a carbon and an energy source for growth were isolated from the soil of 7 water quality evaluation points in Kyonggi area of Korea. Phthalic acid isomer degrading activity of the isolates from the 4 contaminated points was higher than those from the 3 clean points. Among 11 isolates, 4 isolates which have high terephthalic acid degrading activity and degrade two phthalic acid isomers were identified by partal 16S rDNA sequence determination. One of them was identified as Pseudomonas putida, and the others as Comamonas testosteroni. Thus a large number of phthalic acid isomer degrading bacteria in domestic soil were inferred as C. testosteroni. On the basis of these results, the PCR detection of C. testosteroni in soil was applied to monitor soil contamination by phthalic acid isomers. The DNA of C. test-osteroni extracted from 4 g soil was directly detected by PCR with C. testosteroni specific primer pair. The amount of PCR products was different according to sampling sites and more PCR products were obtained from contaminated sites than those from clean sites (Gulpo-chun＞Anyang-chun＞Hwangguji-chun>Shin-chun＞Huk-chun＞Pukhan-river>Kapyeong-chun). This result was coincided with that of the viable cell counts for terephthalic acid degrading bacteria.

• Restorative Dentistry and Endodontics
• /
• v.20 no.2
• /
• pp.463-486
• /
• 1995

The effect of moistening and air-drying of acid-conditioned dentin before priming on the formation of resin-dentin hybrid zone was investigated, Freshly extracted human molars were used and divided at random into 5 groups, Groups 1 - 3 consisted of specimens conditioned with 10 % phosphoric acid for 20 seconds; Group 1 served as a control in which the conditioned dentin was simply blot-dried with a damp facial tissue; Group 2 was air dried for 30 seconds ; Group 3 was air dried for 30 seconds and immediately remoistened for 10 seconds with air-water syringe. and then the specimen was blot-dried with a damp facial tissue. Groups 4-5 were not acid conditioned ; In group 4, the smear layer on the dentin was blot dried before primer placement; Group 5 was air dried only for 30 seconds, The acetone-based primer and bonding agent of All Bond 2 (Bisco. Inc., USA) and composite resin (Z-100, 3M Dental products, USA) were applied for acid conditioned dentin and non-conditioned dentin. The morphologic ultrastructure of resin-dentin hybrid zone was examined by the use of SEM and TEM. and the existence of inorganic material and analysis of Ca/P weight-percent ratio in the resin-dentin hybrid zone were revealed by the EDAX, The results were as follows : 1. In the moistened specimens from acid-conditioned groups, the resin penetrated about 3-$4{\mu}m$ into dentin and the denatured collagen smear layer was not present at the surface. The resin tag was formed to a thickeness of 3-$4{\mu}m$ at the upper part of dentinal tubule and compactively connected to each other by means of many lateral branching. 2. In the air-dried specimens from acid-conditioned groups, the resin penetrated about 2.0-$2.5\;{\mu}m$ into dentin and an upper thin black layer to a thickness of 30-35nm was identified between adhesive resin and demineralized collagen layer. The resin tag to have a diameter of $2.5{\mu}m$ was formed at the upper part of dentinal tubule. However the funnel shape of the tag was not notable compared to the moistened specimens. 3. In the remoistened specimens from acid conditioned groups, the resin penetrated about 2.0-$2.5{\mu}m$ into dentin and an upper black layer was not present. The resin tag at the upper part of dentinal tubule was formed less than $2{\mu}m$ and was weakly connected to each other by means of few lateral branching. 4. In the non-conditioned groups, the smear layer was formed to a thickness of $0.5{\mu}m$ at dentin surface. However, the resin-dentin hybrid zone was not identified by TEM. The evidence of resin penetration into intertubular and intratubular dentin did not show. 5. All the acid-conditioned groups showed that the detected calcium and phosphorus weight percent ratios at the $2{\mu}m$ upper portion from the resin-dentin interface into the resin were much higher than that at the $2{\mu}m$ lower portion from the resin-dentin interface to dentin. (P<0.01).

• Applied Chemistry for Engineering
• /
• v.16 no.2
• /
• pp.250-256
• /
• 2005

Coating appearance is the most important problem in automotive industry. To increase the coating appearance quality, the corrosion resistance and the coating adhesion on metal substrates must be basically solved. The phosphating film made by the pretreatment of metal substrate is important factor to increase the coating adhesion. During the cathodic electrodeposition, the pH at the cathode surface increases up to about 12. In such a highly alkaline condition, the dissolution of metal substrate and phosphate film occurs. These phenomena result in the decrease of the bonding strength between the phosphating film and the substrate. Generally, the structure of zinc phosphating film is hopeite or phosphophyllite. It has been known that the phosphophyllite film contains better corrosion resistance and paint adhesion for hot water immersion test because of the decrease of dissolving amount of both metal substrate and phosphating film during the cathodic electrodeposition. It is found that the addition of Ni and Mn composition increase P-ratio and then can improve the paint adhesion on metal surface and the corrosion resistance.

• Restorative Dentistry and Endodontics
• /
• v.25 no.2
• /
• pp.243-253
• /
• 2000

The purpose of this in vitro study was to evaluate dentin bonding by two different dentin bonding systems(DBS) using acetone based primer or adhesive [All Bond 2(AB2), One Step(OS)] when they were applied by wet or dry bonding technique. Morphology of resin-dentin interface and hybrid layer thickness(HLT) were investigated using Confocal Laser Scanning Microscope(CLSM) and compared to shear bond strength(SBS). 72 extracted sound human molars were randomly divided into 4 groups of 18 teeth each - Group 1.(AW); AB2 by wet bonding. Group 2(AD); AB2 by dry bonding. Group 3.(OW); OS by wet bonding, Group 4.(OD); OS by dry bonding. In 6 teeth of each group, notch-shaped class V cavities(depth 2mm) were prepared on buccal and lingual surface at the cementoenamel juction(12 cavities per group). To obtain color contrast in CLSM observation, bonding resins of each DBS were mixed with rhodamine B and primer of AB2 was mixed with sodium fluorescein. Prepared teeth of each group were treated with AB2, OS, respectively according to the manufacturer's instructions except for dentin surface moisture treatment after acid etching. In group 1 and 3, after acid etching, excess water was removed with wet tissue(Kimwipes), leaving consistently shiny, visibly hydrated dentin surface. In group 2 and 4, dentin surface was dried for 10 seconds at 1 inch distance. The treated teeth were then packed with composite resin(${\AE}$litefil) and light-cured. 12 microscopic samples($60{\sim}80{\mu}m$ thickness) of each group were obtained after longitudinal section and grinding(Exakt cutting and grinding system). Morphological investigation of resin-dentin interface and HLT measurement using CLSM were done. For measurement of SBS, remaining 12 teeth of each group were flattened occlusally to remove all enamel and grinded to 500 grit SiC(Pedemet Specimen Preparation Equipment). After applying DBS on the exposed dentin surface, composite resin was applied in the shape of cylinder, which has 5mm diameter, 1.5mm thickness, and light cured. SBS was measured using Instron with a crosshead speed of 0.5mm/min. It was concluded as follows, 1. HLT of AW(mean: $2.59{\mu}m$) was thicker than any other group, and followed by AD, OW, OD in descending order(mean; 2.37, 2.28, $1.92{\mu}m$). Only OD had statistically significant differences(p<0.05) to AW and AD. 2. There were intimate contact of resin and dentin at the interface in wet bonding groups, but gaps or irregular interfaces were observed in dry bonding groups. 3. The length, diameter, density of resin tags were various even in the same group without significant differences between groups and lots of adhesive lateral branches were observed. 4. There were no statistically significant difference of SBS between AB2 and OS, but SBS of wet bonding groups were significantly higher(p<0.05) than dry bonding groups. 5. There were no consistent relationships between HLT and SBS.

• Proceedings of the KACD Conference
• /
• 2001.11a
• /
• pp.577-577
• /
• 2001

The lastest concepts in bonding are "total etch", in which both enamel and dentin are etched with an acid to remove the smear layers, and "wet dentin" in which the dentin is not blown dry but left moist before application of the bonding primer. Ideally, the application of a bonding agent to tooth structure should be insensitive to minor contamination from oral fluids. Clinically contaminations such as saliva, gingival fluid, blood and handpiece lubricant are often encountered by dentists during preparation of a restoration. The aim of this study was to evaluate the effect of contamination by hem-ostatic agents on shear bond strength of compomer restorations. One hundred and ten extracted human maxillary and mandibular molar teeth were collected. The teeth were cleaned from soft tissue remnant and debris and stored in physiologic solution until they were used. Small flat area on dentin of the buccal surface were wet ground serially with 400, 800 and 1200 abrasive paper on automatic polishing machine. The teeth were randomly divided into 11 groups. Each group was conditioned as follows: Group 1 : Dentin surface was not etched and not contaminated by hemostatic agents. Group2 : Dentin surface was not etched but was contaminated by Astringedent (Ultradent product Inc., Utah, U.S.A.). Group3 : Dentin surface was not etched but was contaminated by Bosmin (Jeil Phann, Korea.). Group4 : Dentin surface was not etched but was contaminated by Epri-dent (Epr Industries, NJ, U.S.A.). Group5: Dentin surface was etched and not contaminated by hemostatic agents. Group 6 : Dentin surface was etched and contaminated by Astringedent. Group7 : Dentin surface was etched and contaminated by Bosmin. Group8 : Dentin surface was etched and contaminated by Epri-dent. Group9 : Dentin surface was contaminated by Astringedent. The contaminated surface was rinsed by water and dried by compressed air. Group10 : Dentin surface was contaminated by Bosmin. The contaminated surface was rinsed by water aud dried by compresfed air. Group 11 : Dentin surface was contaminated by Epri-dent. The contaminated surface was rinsed by water and dried by compresfed air. After surface conditioning, F2000 was applicated on the conditoned dentin surface. The teeth were thermocycled in distilled water at $5^{\circ}C\;and\;55^{\circ}C$ for 1000 cycles. The samples were placed on the binder with the bonded compomer-dentin interface parallel to the lmife-edge shearing rod of the Universal testing machine(Zwick 020, Germany) running at a cross head speed of 1.0mmimin. There were no significant differences in shear bond strength between groups 1 and group 3 and 4, but group 2 showed significant decrease in shear bond strength compared with group 1. There were no significant differences in shear bond strength between group 5 and group 7 and 8, but group 6 showed significant decrease in shear bond strength compared with group 5. There were no significant differences in shear bond strength between group 5 and group 9, 10 and 11.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.27 no.1
• /
• pp.1-13
• /
• 2011

The aim of this study was to evaluate shear bond strength of pressed reinforced composite resin ($TESCERA^{TM}$ ATL) veneering to zirconia with various surface treatments. Forty sintered zirconia specimens and forty pockmarked zirconia specimens were fabricated. All the materials were categorized as Group 1 (Control : porcelain veneering on zirconia surface), Group 2 ( $TESCERA^{TM}$ ATL dentine veneering after bonding agent application on zirconia surface), Group 3 ($TESCERA^{TM}$ ATL dentine veneering on pockmarked zirconia surface), Group 4 ($TESCERA^{TM}$ ATL dentine veneering after bonding agent application on pockmarked zirconia surface), Group 5 (Thermocycling on Group 1), Group 6 (Thermocycling on Group 2), Group 7 (Thermocycling on Group 3), and Group 8 (Thermocycling on Group 4). SBS(Shear bond strength) of 8 groups was determined with an Instron Universal Testing Machine. Also fractured surface of specimens were observed with a scanning electron microscope. There were no significant differences in the initial SBS between Group 1(control group), Group 3, and Group 4. (p>0.05) Group 2 presented the lowest SBS values. There was a no significant difference between just as 24hour water storage and simulated aging on pockmarked zirconia groups. (p>0.05) A formation of pockmarked irregularities on zirconia surface as mechanically pitted surface was reliable method for establishing a stronger bond between $TESCERA^{TM}$ ATL and zirconia-based material.

• Journal of Mushroom
• /
• v.10 no.3
• /
• pp.120-128
• /
• 2012

Recently sawdust cultivation of Shiitake mushroom (Lentinula edodes) is increasing. It is important to make mycelia to be brown on the substrate surface. This browned surface in sawdust cultivation plays an important role like as artificial bark of the oak log, which protects the other pests and suppresses water evaporation in the substrate. In order to isolate genes which related to brown color formation, differential display method was used. Two cDNA fragments obtained by DD-PCR were 1.2 and 1.6kb and these were expressed in white colored mycelia from L. edodes, but not brown colored mycelia. Partial sequencing of these cDNA fragments showed that the 1.6kb cDNA had 100% identity with the microsatellites gene from Dugenia polichroa. However, the other 1.2kb cDNA fragment had poly T tail on 3' region of partial open reading frame on 5' region. The new primer designed based on the sequence of 1.2kb cDNA was constructed. RT-PCR analysis using the newly designed 0.12kb cDNA specific primer showed that the gene was only expressed in white color mycelia, but not in brown color mycelia. Sequence analysis of 5' region of this 1.2kb cDNA revealed that this gene contained partial open reading frame consisted of 110 amino acid. Homology search using DNASIS database showed that this gene had high sequence homology of 66.7% in DNA level and 69.2 % in amino acid level with dTDP-glucose 4,6-dehydratases gene from Arabidopsis thaliata. The dTDP-glucose 4,6-dehydratases gene was known to be function to have tolerance with oxidation stress. These results strongly suggest that this gene isolated from white mycelia of L. edodes might have a function of repressor against mycelia browning. Therefore I designated this gene as BCR (Brown Color Repressor) gene.

• Journal of the Korea Concrete Institute
• /
• v.27 no.1
• /
• pp.21-28
• /
• 2015

Recent studies on concrete floating structure development focused on connection system of concrete modules. Precast concrete modules are designed to be attached by prestressing in the water, exposing the structure to the loads from water and making the construction difficult. Therefore, a development of bond material became a key issue in successful connection of floating concrete modules. In this study, micro-silica mixed aqua epoxy (MSAE) is developed for the task. Existing primer aqua epoxy, originally used as a bond material for the retrofit of concrete structures using fiber reinforced polymers, is evaluated to find the optimum micro-silica added mix proportion. Micro-silica of 0~4 volume % was mixed in standard mixture of aqua epoxy. Then, the material property tests were performed to study the effect of micro-silica in aqua epoxy by controlling the epoxy silane proportion by 0, ${\pm}5$, ${\pm}10%$. The optimum mix design of MSAE was derived based on the test results. The MSAE was used to connect concrete module specimens with the epoxy thickness variation of 5, 10, and 20mm. Then, 3-point loading test was performed to verify the bond capacity of MSAE. The results show that MSAE improves the bond capacity of concrete module.

• Journal of Korean Society of Environmental Engineers
• /
• v.39 no.6
• /
• pp.339-347
• /
• 2017

The objectives of this study were to analyze ecological characteristics of fish compositions and estimate the optimal ecological flow using the physical habitat simulation system (PHABSIM) in Wonju stream and Boseong river. We sampled fishes using two gears such as casting net and kicknet to determine fish distribution and also measured flow velocity, water depth, bed material at the point where fish collected. Total number of species and individuals sampled were 20 and 2,104, respectively and dominant species was Zacco platypus (39.7%) and subdominant species was Z. koreanus (RA: 15.8%) in Wonju stream. In Boseong river, collected fishes were 1,638 individuals, 28 species. Dominant and sub-dominant species was Z. platypus (RA: 22.0%) and Microphysogobio yaluensis (RA: 17.2%), respectively. For calculating habitat suitability index (HSI), we selected Z. platypus as representative fish species and analyzed water depth and flow velocity. Water depth and flow velocity were 0.2-0.6 m, 0.1-0.3 m/s, respectively in Wonju stream and 0.3-0.6 m, 0-0.3 m/s, respectively in Boseong river. According to the analysis of ecological flow simulation, optimal flow was 1.1 cms and 0.3 cms in Wonju stream and 0.4cms, 2.2cms in Boseong river at up and down stream respectively. WUA (Weighted Usable Area) was 9.5%, 26.6% in Wonju stream and 34.8%, 53.3% in Boseong river at up and down stream respectively.

• Journal of fish pathology
• /
• v.25 no.3
• /
• pp.151-158
• /
• 2012

Diseased eel (Anguilla bicolor) displayed severe hemorrhages in the gills, and congestion and swelling in the liver. During the epizootic, the water temperature was $28^{\circ}C$ and the morality rates were about 5%. No parasites were found on the gills and skin. Bacteria were not cultured from any internal organs using TSA or SS agar at $28^{\circ}C$ for 48 hrs. Histopathologically, the gills showed epithelial hyperplasia in the base of secondary gill lamellae and hemorrhages in the capillaries. Some cells in the proliferated interlamellar epithelia exhibited marginal hyperchromatosis. And severe vacuolated changes in the parenchymal cells and congestion in the central veins were observed in the liver. The specific amplicon (396 bp) was detected from gills and opercula of affected eel PCR using Anguillid herpesvirus-1 (AngHV-1) -specific primer sets HVAPOLVPSD (5-'GTG TCG GGC TTT GTG GTG C-3') and HVAPOLOOSN (5'-CAT GCC GGG AGT CTT TTT GAT-3'). Sequencing analysis of the amplicon demonstrated that this gene was 99% homologous to the AngHV-1 sequence deposited in GenBank. This is the first report of AngHV-1 outbreak in the farmed shortfin eels (A. bicolor) in Korea. When diseased fish were maintained for 10 days at water temperatures of $32^{\circ}C$ and $35^{\circ}C$, the cumulative mortalities were 100% and 10%, respectively. Even though the AngHV-1 genome in the gills from the eel kept at $35^{\circ}C$ was detected using PCR, the structure of gill filaments was similar with that of normal fish. Increasing the water temperature to $35^{\circ}C$ was an effective way to diminish the mortality of AngHV-1 affected eel.