• Bulletin of the Korean Chemical Society
• /
• 제31권12호
• /
• pp.3765-3770
• /
• 2010

Selective oxidation of olefins has been carried out in water medium with tert-butylhydroperoxide (TBHP, 70% aqueous) as an oxidant using polymer-anchored Ni(II) complex as a catalyst. Several parameters were varied to optimize the reaction conditions. Under the optimized reaction conditions olefins gave selectively allylic oxidation products. The present polymer anchored Ni(II) complex can be recycled five times without any appreciable loss in catalytic activity.

• 한국물환경학회지
• /
• 제38권6호
• /
• pp.267-274
• /
• 2022

This paper is a result of research conducted on the 800,000 m³/d capacity of A Water Treatment Plant (WTP) and 400,000 m³/d capacity of B WTP plant in operation in the Nakdong River region. We evaluated the effect of algae broom on the WTP operation based on the running data of both WTP and the data on the pre-oxidation process field test for algae control using sodium permanganate (SPM) at the B WTP. The study results showed that during the algal bloom period, the coagulant dose increased by 102% in A WTP and 58% in B WTP, respectively, and the chlorine dose also increased by 38% and 29%, respectively, which may affect Total trihalomethane (THM) production. Data such as algal populations and Chl-a, residual chlorine and THM, algal populations, and ozone dose appeared also highly correlated, confirming that algal broom affects WTP operations, including water quality and chemical dosage. As a result of the field test of B WTP, THMs appeared lower than that of the control, suggesting the possibility of the SPM pre-oxidation process as an alternative to algae-related water quality management. Furthermore, in terms of GHG emissions due to energy consumption, it was observed that the pre-oxidation process using SPM was approximately 10.8%, which is a very low ratio compared to the pre-ozonation process. Therefore, these results suggest that the SPM pre-oxidation process can be recommended as an alternative to low-carbon water purification technology.

• Nuclear Engineering and Technology
• /
• 제52권12호
• /
• pp.2880-2886
• /
• 2020

A small leak occurring on the surface of a fuel rod due to damage exposes UO₂ to a steam atmosphere. During this time, fission gas trapped inside the fuel rod leaks out, and the gas leakage can be increased due to UO₂ oxidation. Numerous studies have focused on the steam oxidation and its thermodynamic calculation in UO₂. However, the thermodynamic calculation of the UO₂ oxidation in a pressurized water reactor (PWR) environment has not been studied extensively. Moreover, the kinetics of the oxidation of UO₂ pellet also has not been investigated. Therefore, in this study, the thermodynamics of UO₂ oxidation under steam injection due to a damaged fuel rod in a PWR environment is studied. In addition, the diminishing radius of the UO₂ pellet with time in the PWR environment was calculated through an experiment simulating the initial time of steam injection at the puncture.

• 환경위생공학
• /
• 제19권2호
• /
• pp.1-6
• /
• 2004

In Bok-Jeong water treatment plant, chlorination is the only technique used for disinfection of drinking water. This disinfecting treatment leads to the formation of trihalomethanes (THMs). This study was carried out to investigate the possibility of improving removal efficiency of THM precursor in the conventional water treatment processes by $TiO_2$ photocatalytic oxidation. Removal efficiencies of DOC, $UV_{254}$, THMFP were low in the conventional water treatment processes. With application of $TiO_2$ photocatalyst, DOC, $UV_{254}$, THMFP were reduced more effectively. As the $TiO_2$ photocatalytic reaction time increased, the removal efficiencies of DOC, $UV_{254}$, THMFP were increased. The $TiO_2$ photocatalytic removal efficiencies of DOC, $UV_{254}$, THMFP were increased with increasing $TiO_2$ dosage. However, over 0.6g/l of $TiO_2$ dosage, the efficiency reached a plateau.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제45회 하계 정기학술대회 초록집
• /
• pp.280-280
• /
• 2013

In green plants, energy generation is accomplished through light-harvesting photosystem, which utilize abundant visible light and multi-stepwise redox reaction to oxidize water and reduce NADP+, transferring electrons efficiently with active cofactors1. Inspired by natural photosynthesis, artificial solar water-splitting devices are being designed variously. However, the several approaches involving immobilization2, conjugation3, and surface modification4 still have limitations. We have made artificial photosynthesis templates by self-assembling tyrosine-based peptide to mimick photosystem II. Porphyrin sensitizer absorbing blue light strongly was conjugated with the templates and they were hybridized with cobalt oxide through the reduction of cobalt ions in an aqueous solution. The formation of hybrid templates was characterized using TEM, and their water oxidation performance was measured by fluorescence oxygen probe. Our results suggest that the bio-templated assembly of functional compounds has a great potential for artificial photosynthesis.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2011년도 추계학술발표대회
• /
• pp.36.2-36.2
• /
• 2011

Titanium and its alloys have been widely used for orthopedic implants because of their good biocompatibility. We have previously shown that the crystalline titania layers formed on the surface of titanium metal via anodic oxidation can induce apatite formation in simulated body fluid, whereas amorphous titania layers do not possess apatite-forming ability. In this study, hot water and heat treatments were applied to transform the titania layers from an amorphous structure into a crystalline structure after titanium metal had been anodized in acetic acid solution. The apatite-forming ability of titania layers subjected to the above treatments in simulated body fluid was investigated. The XRD and SEM results indicated hot water and/or heat treatment could greatly transform the crystal structure of titania layers from an amorphous structure into anatase, or a mixture of anatase and rutile.The abundance of Ti-OH groups formed by hot water treatment could contribute to apatite formation on the surface of titanium metals, and subsequent heat treatment would enhance the bond strength between the apatite layers and the titanium substrates. Thus, bioactive titanium metals could be prepared via anodic oxidation and subsequent hot water and heat treatment that would be suitable for applications under load-bearing conditions.

• 전자공학회논문지
• /
• 제53권8호
• /
• pp.129-135
• /
• 2016

본 연구는 알칼리 환원수기에 3가지 필터(활성카본, 중공사막, 카본블럭)를 이용해서 원수를 통과시켜 통수 양에 따른 산화환원전위(Oxidation Reduction Potential) ORP값이 안정화되는 것을 평가한 것이다. 알칼리 환원수기는 환원의 기능을 가지고 있는 물을 만드는 시스템으로 인체에 유익한 미네랄과 ORP값이 일반 물에 비해 매우 낮은 값을 가지고 있는 기능수이다. 필터를 통과한 물을 전기 분해하면 물속에 있는 음이온과 양이온은 격막을 통해서 -전극 쪽에는 칼슘($Ca^+$), 칼륨($K^+$), 마그네슘($Mg^+$), 나트륨($Na^+$)을 포함한 물로 인체에 유익한 미네랄이 포함된 알칼리 환원수를 얻고 +극에는 염소(Cl),인(P),유황(S)등 - 이온을 띄고 있는 유기물이 만들어 진다. 실험에서 알칼리 환원수(Alkaline Reduced Water)에서 전기분해의 전압의 크기를 조절하여 1단(pH8), 2단(pH8.5), 3단(pH9), 4단(pH9.5)으로 알칼리 환원수에 사용되고 -1단(pH6.0), -2단(pH5.0)의 산성산화수로 사용하고 있다. 이러한 시스템으로 3가지 필터에 통수하면서 ORP값이 어떻게 변화하고 어느 정도에서 안정화되는지를 평가하였고 대략 100L는 통수되어야 ORP값이 안정화하는 것을 측정하고 평가하였다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.360-360
• /
• 2010

Very initial stage of oxidation process of Si (001) surface was investigated using large scale molecular dynamics simulation. Reactive force field potential was used for the simulation owing to its ability to handle charge variation associated with the oxidation reaction. To know the detail mechanism of both adsorption and desorption of water molecule (for simulating wet oxidation), oxygen molecule (for dry oxidation) and their atom constituents, interaction of one molecule with Si surface was carefully observed. The simulation is then continued with many water and oxygen molecules to understand the kinetics of oxide growth. The results show that possibilities of desorption and adsorption depend strongly on initial atomic configuration as well as temperature. We observed a tendency that H atoms come relatively into deeper surface or otherwise quickly desorbed away from the silicon surface. On the other hand, most oxygen atoms are bonded with first layer of silicon surface. We also noticed that charge transfer is only occur in nearest neighbor regime which has been pointed out by DFT calculation. Atomic structure of the interface between the oxide and Si substrate was characterized in atomic scale.

• 상하수도학회지
• /
• 제10권4호
• /
• pp.55-63
• /
• 1996

This research was based on comparing ozonation with combined ozone/ultraviolet oxidation through the methods of reducing THM produced during water treatment. The results were as follows ; 1. The decline of THM concentration was appeared according as ozone dosage increases with ozonation and combined ozone/ultraviolet oxidation. The more effective method was the treatment of irradiating UV then ozonation. In the beginning of reaction the decline rate of THM formation potential was low, I thought it was because that the reaction of ozone and humic acid needed times to be steady state, or that THM formation potential existed according to humic acid. 2. The effect of combined ozone/ultraviolet oxidation when ozone dosage was 4.2mg/L min was almost the same that of ozonation when ozone dosage was 8.6mg/L min. 3. In experiment of TOC decline through ozonation and combined ozone/ultraviolet oxidation, TOC concentration was also dropped according to increasing ozone dosage and the more effective results were showed in treatment of irradiating UV than ozonation. But the similar TOC remove rates were showed in experiment of changing with ozone dosage during combined ozone/ultraviolet oxidation TOC remove rates were low in proportion to the remove rates of THM formation potential, it was considered that humic acid was made low molecule itself though ozonation and ozone/ultraviolet oxidation. Moreover, the high degree of remove efficiency will be get though the treatment of activated carbon of GAC treatment after combined ozone/ultravilet oxidation.

• Food Science and Biotechnology
• /
• 제15권3호
• /
• pp.399-403
• /
• 2006

The effect of flour storage conditions on the lipid oxidation of fried products during storage was studied. Wheat flour was stored at $60^{\circ}C$ in the dark and at water activity (Aw) of 0.3, 0.5, or 0.8 for 21 days. The square-shaped dough ($2{\times}2{\times}0.1\;cm$) made with the stored flour and water was fried in soybean oil at $160^{\circ}C$ for 1 min. The fried products were stored at $60^{\circ}C$ for 15 days in the dark. The degree of lipid oxidation of the fried products was evaluated by conjugated dienoic acid (CDA) content and p-anisidine value (PAV). Both CDA content and PAV of the fried products increased with lengthening storage time of the fried products, suggesting that longer storage of the fried products raised the lipid oxidation. Furthermore, the lipid oxidation of the fried products made with flour that had been stored for a longer time tended to be higher than that of those made with unstored or short-term-stored flour. However, Aw at which the flour was stored did not significantly affect the lipid oxidation of either flour or the fried products during storage. The storage time of flour clearly exerted a greater effect than Aw on the lipid oxidation of the fried products during storage at $60^{\circ}C$ in the dark. This suggests that for the storage stability of fried products, the flour storage time is a more important factor than Aw at which the flour is stored.