• 설비공학논문집
• /
• 제23권4호
• /
• pp.259-264
• /
• 2011

Gas hydrate is formed by physical binding between water molecule and gas such as methane, ethane, propane, or carbon dioxide, etc., which is captured in the cavities of water molecule under the specific temperature and pressure. $1\;m^3$ hydrate of pure methane can be decomposed to the methane gas of $172\;m^3$ and water of $0.8\;m^3$ at standard condition. If this characteristic of hydrate is reversely utilized, natural gas is fixed into water in the form of hydrate solid. Therefore, the hydrate is considered to be a great way to transport and store of natural gas in large quantity. Especially the transportation cost is known to be 18~25% less than the liquefied transportation. However, when methane gas hydrate is artificially formed, its reaction time may be too long and the gas consumption in water becomes relatively low, because the reaction rate between water and gas is low. Therefore, for the practical purpose in the application, the present investigation focuses on the rapid production of hydrates and the increment of the amount of captured gas by adding zeolite into pure water. The results show that when the zeolite of 0.01 wt% was added to distilled water, the amount of captured gas during the formation of methane hydrate was about 4.5 times higher than that in distilled water, and the methane hydrate formation time decreased at the same subcooling temperature.

• 대한화학회지
• /
• 제46권3호
• /
• pp.179-186
• /
• 2002

$TiO_2$(110) 표면에서 물의 OH 결합 활성화가 어떤지 전자적 메카니즘에 의해 이루어지는 extended Hiickel 방법을 통해 알아보았다. 물분자는 $3a_1$오비탈의 시그마 상호작용 겨로가로 5배위 $Ti^{4+}$원자바로위에 수직으로 흡착한다. 이 결합구조에서는 물분자의 H원자가 $TiO_2$의 2배위 bridging $O^{2-}(O_b)$원자와 너무 멀리 떨어져 있으므로 OH 결합 해리를 촉진시키는 수소결합 상호 작용을 할 수 없으므로 물분자를 $O_b$ 원자쪽으로 기울여 수소결합이 형성되도록 한다. 이 경우 $O_b$ P 오비탈로부터 흡착 물분자의 LUMO $2b_1$반 결합성 오비탈로 전자밀도의 이동이 일어나고 또 물의 $3a_1$오비탈(약한 결합성)로부터 $Ti^{4+} 3d_{z2}$오비탈로 전자밀도의 이동이 일어남으로써 물의 OH 결합이 상당히 약화됨을 확인할 수 있었고 그 결과 OH와 H로 해리할 것이라는 해석이 가능하다.

• 한국가구학회지
• /
• 제14권2호
• /
• pp.1-12
• /
• 2003

This study was carried out to determine the mechanical and physical properties of particle boards glued with condensed tannin (Wattle Tannin) powder that was single-molecule phenolic compounds like powdered phenolic resin. Our findings are; 1) It is necessary to spray water on the chip surfaces for effective application of powdered -form tannin resin. It shows that the best and optimum mat moisture increase is 14% of water spray on the surface of chips for developing PB properties. 2) In general, for both liquid and powdered tannin adhesives, their physical and mechanical properties has been proportional to the increase of resin level. But, the most efficient addition ratio is 16% of resin on dry basis. Specially, it is found that the resin level influences on the amount of free formaldehyde emission. The higher the resin level is, the lower the emission is. These phenomena seem to result from the increase of hexamine or formaline in the adhesives used as a hardener, that reduce the free-formaldehyde amount by reaction of tannin of poly-molecule and water. 3) The optimum condition for manufacturing PBs is the condition of hexamine of 5% and formaline of 6% in mechanical and physical properties. Hexamine is superior to formaline in mechanical and physical properties along with the control of the free formaldehyde emission amount. The result of NaOH's addition is insignificant in all experiments of both mechanical and physical properties.

• 대한수의학회지
• /
• 제43권2호
• /
• pp.195-202
• /
• 2003

Chitosan is known to have antibacterial, antitumorogenic, hypolipidemic and immunopotentiating activities, hence finding diverse uses as a component in varying functional foodstuffs. However, some investigators reported it caused mineral absoiption inhibition and excess coagulation. From the chemical viewpoint, conventional chitosans are high-molecule polymers lacking water solubility, which could be related with their possible toxicity. A newly developed low- molecule water soluble chitosan is thought to have low toxicity compared to conventional chitosans. But no investigation was carried out to evaluate its toxicity. In this study, a 28-day subacute oral toxicity study of the water-soluble chitosan was performed in Sprague-Dawley rats of both sexes. Each 36 male and female rats were orally administered with 500, 1,000 and 2,000 mg/kg/day for 28 consecutive days, respectively. Clinical parameters (growth rate, feed and water consumption, daily inspection, urine analysis) during the 28 days indicated the water-soluble chitosan did not induce any abnonnal changes. There were no abnormal findings due to the administration of the test substance in gross and microscopic findings. We had not found alteration in absolute and relative organ weight between the control and treated groups, with only exception in the liver but lacking dose-dependency. The results of hematology and serum biochemistry examination revealed that no treatment related changes were between control and all dose groups. In conclusion, it was suggested that subacute toxicity of the water-soluble chitosan was low and the no-observed adverse effect level was considered to be over 2,000 mg/kg in rats.

• Bulletin of the Korean Chemical Society
• /
• 제24권4호
• /
• pp.431-436
• /
• 2003

Solvolytic rate constants at 25℃ are reported for solvolyses of cinnamyl bromide (1) in binary mixtures of water with acetone, ethanol, methanol, methanol-d, and 2,2,2-trifluoroethanol. Product selectivities are reported for solvolyses of 1 in aqueous ethanol and methanol. Rate ratios in solvents of the same $Y_{Br}$ value and different nucleophilicity provide measures of the minimum extent of nucleophilic solvent assistance (e.g. $[k_{40EW}/k_{97TFE}]$Y = 2.88, EW = ethanol-water). With use of the extended Grunwald-Winstein equation, the l and m values are similar to the values of 0.43 and 0.88 obtained for the solvolyses of 1 using the equation (see below) which includes a parameter (I) for solvation of aromatic rings. The magnitude of l and m values associated with a change of solvent composition predicts the $S_{N1}$ reaction mechanism rather than an $S_{N2}$ channel. Product selectivities (S), defined by S = [ether product]/[alcohol product]×[water]/[alcohol solvent] are related to four rate constants for reactions involving one molecule of solvent as nucleophile and another molecule of solvent as general base catalyst. A linear relationship between 1/S and molar ratio of solvent is derived theoretically and validated experimentally for solvolyses of the above substrates from water up 75% 1/S = $(k_{wa}/k_{aw})$([alcohol solvent]/[water]) + $k_{ww}/k_{aw}$ alcohol-water. The results are best explained by product formation from a “free” carbocation intermediate rather than from a solvent-separated ion pair.

• Bulletin of the Korean Chemical Society
• /
• 제26권11호
• /
• pp.1711-1716
• /
• 2005

Fragmentations and ion-molecule reactions of ionized cyclohexane propionic acid and cyclohexane butyric acid were studied using FTMS and theoretical calculations. The difference in bond dissociation depending on the aliphatic chain length was investigated and mechanisms for the possible rearrangements depending on the aliphatic carbon length were suggested. The most abundant fragment ion of the ionized cyclohexane propionic acid was c-$C_6H_{11}CH_2\;^+$ formed from the molecular ion by the direct C-C bond cleavage, while that of the ionized cyclohexane butyric acid was c-$C_6H_9C(OH)=OH^+$ formed by rearrangement of the molecular ion from the acid to diol form and loss of propyl radical. Stabilities of the radical and distonic ions of $C_nH_{2n}O^{+\bullet}$ formed from the molecular ion were compared. Protonated molecules were dissociated into smaller ions by losing one or two water molecules. The $[nM + H]^+$, $[nM + H - H_2O]^+$, and $[nM + H - 2H_2O]^+$ with n = 2 and 3 were generated by solvation with the neutral molecules in the ICR cell at long ion trapping time.

• 대한화학회지
• /
• 제55권3호
• /
• pp.379-384
• /
• 2011

[ $25^{\circ}C$ ] 순수 물에서 음이온성 계면활성제인 DBS(sodium dodecyl benzenesulfonate)와 SDS(sodium dodecylsulfate) 그리고 비이온성 계면활성제인 Brij 30(polyoxyethylene(4) lauryl ether) 사이의 혼합미셀화에 대한 임계미셀농도(CMC)와 반대이온의 결합상수값(B)을 전도도법과 표면장력계법으로 측정하였다. 이와 같이 측정한 CMC값에 비이상적 혼합미셀화 모델을 적용함으로써 여러 가지 열역학적 함수값($X_i,\;{\gamma}i,\;C_i,\;a_i^M,\;{\beta}$ 및 ${\Delta}H_{mix}$)들을 계산하여 상호 비교분석하였다. 그 결과, SDS는 DBS보다 Brij 30과 더욱 강한 상호작용을 이루었으며, SDS/Brij 30 혼합계면활성제가 이상적 혼합미셀화로부터 가장 큰 음의 벗어남을 보였다. 그리고 SDS/DBS 혼합계면활성제는 거의 이상적 혼합미셀화를 이루는 것으로 나타났다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2005년도 제28회 학술발표회 초록집
• /
• pp.54-54
• /
• 2005

• 분석과학
• /
• 제8권4호
• /
• pp.1069-1074
• /
• 1995

The application of scanning electrochemical microscopy to the imaging of surfaces in water and air and to the study of the electrochemistry of single molecules is discussed.

• Bulletin of the Korean Chemical Society
• /
• 제26권6호
• /
• pp.979-982
• /
• 2005