• Journal of Korean Society of Water and Wastewater
• /
• v.19 no.6
• /
• pp.819-826
• /
• 2005

To guarantee the disinfection ability in clearwell, a value of CT is considered where C[mg/l] is disinfectant residual at the exit of clearwell and T[min] means $T_{10}$, the contact time when 10% of tracer is out of clearwell after introducing the tracer at the inlet. To meet a CT value required, increasing the C value is not recommended because high C value can increase potential of producing disinfection by product like THMs. Increasing the hydraulic efficiency surrogated by $T_{10}$ is thus an option widely recommended. Right now, it is widely adopted estimating $T_{10}$ considering LW ratio only due to the suggestions of previous researches. The authors think however there are other factors to consider including shape, flow rate, configuration of inlet and outlet, and the existence of intra basin. This study is initiated to closely look at the effects of two factor on hydraulic efficiency. The factors are shape and inlet flow velocity, i.e., inflow. For that, computational fluid dynamics (CFD) model is developed and pilot test is also carried out. The results show that at a L/W ratio, disinfection ability is overestimated with larger length in shape and higher inlet flow velocity. This suggests that in determining $T_{10}$, the shapes of clearwell and inlet flow velocity should also be considered as well as L/W ratio.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2011.05a
• /
• pp.252-252
• /
• 2011

Rainfall-runoff models are calibrated and validated by using a same data set such as observations. The past climate change effects the present rainfall pattern and also will effect on the future. To predict rainfall-runoff more preciously we have to consider the climate change pattern in the past, present and the future time. Thus, in this study, the climate change represents changes in mean precipitation and standard deviation in different patterns. In some river basins, there is no enough length of data for the analysis. Therefore, we have to generate the synthetic data using proper distribution for calculation of precipitation based on the observed data. In this study, Kajiyama model is used to analyze the runoff in the dry and the wet period, separately. Mean and standard deviation are used for generating precipitation from the gamma distribution. Twenty hypothetical scenarios are considered to show the climate change conditions. The mean precipitation are changed by -20%, -10%, 0%, +10% and +20% for the data generation with keeping the standard deviation constant in the wet and the dry period respectively. Similarly, the standard deviations of precipitation are changed by -20%, -10%, 0%, +10% and +20% keeping the mean value of precipitation constant for the wet and the dry period sequentially. In the wet period, when the standard deviation value varies then the mean NSE ratio is more fluctuate rather than the dry period. On the other hand, the mean NSE ratio in some extent is more fluctuate in the wet period and sometimes in the dry period, if the mean value of precipitation varies while keeping the standard deviation constant.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.27 no.5
• /
• pp.345-352
• /
• 2015

Two-dimensional hydraulic model experiments on vertical structures were conducted to investigate wave transmission characteristics under irregular wave condition. The formula about transmission coefficient for the vertical structure was suggested and the results were compared with Goda(1969). Since Goda(1969)'s tests were conducted based on regular waves, the results showed the discrepancy with this study. The Goda's results were relatively higher than the results from the present study. An influence parameter was quantitatively suggested in this study to consider the effect of structural design factors such as the width of structures, the water depth, and the wave length on the wave transmission, while Goda(1969) suggested the mean, upper and lower limits of parameters for the vertical wall(d=h). The transmission coefficients and energy conservation for zero-freeboard conditions were analyzed.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.19 no.5
• /
• pp.484-491
• /
• 2007

Numerical experiments using a numerical wave tank have been performed to verier the nonlinear interaction between monochromatic waves and a submerged horizontal plate. As a model for numerical wave tank, we used a higher-order Boundary Element Method(BEM) based on fully nonlinear potential flow theory and CADMAS-SURF for solving Navier Stokes equations and exact free surface conditions. Both nonlinear models are able to predict the higher harmonic generation in the shallow water region over a submerged horizontal plate. CADMAS-SURF, which involves the viscous effect, can evaluate the higher harmonic generation by flow separation and vortices at the each ends of plate. The comparison of reflection and transmission coefficients with experimental results(Patarapanich and Cheong, 1989) at different lengths and submergence depths of a horizontal plate are presented with a good agreement. It is found that the transfer of energy from the incident fundamental waves to higher harmonics becomes larger as the submergence depth ratio decreases and the length ratio increases.

• Polymer(Korea)
• /
• v.26 no.1
• /
• pp.105-112
• /
• 2002

The low actuation voltage and quick bending response of IPMC(ion-exchange polymer metal composite) are considered attractive for the construction of various types of actuators. In this study, in order to develop a new type actuators by using the IPMC platinum electrode of IPMC are fabricated by using electroless impregnation-reduction method plating. As the platinum-plating times are increased, IPMC performance was improved in terms of bending displacement and force due to the enhanced surface conductivity. In addition, we investigated the basic actuation characteristics of resonance frequency and actuator length as well as the effect of water uptake and ion mobility. Using the classical laminate theory(CLT), a modeling methodology was developed to predict the deformation, bending moment, and residual stress distribution of anisotropic IPMC thin plates. In this modeling methodology, the internal stress evolved by the unsymmetric distribution of water inside IPMC was quantitatively calculated and subsequently the bending moment and the curvature were estimated for various geometry of IPMC actuator.

• Proceedings of the SOHE Conference
• /
• 1997.12a
• /
• pp.45-49
• /
• 1997

To study the effect of amylose on the mechanism of gel formation, swelling power, water solubility, the pattern of alkali gelatinization and gel properties were investigated. The swelling power of waxy maize starch(Amioca) was the highest and followed by those of PFP ＞Amaizo ＞ Amylomaize Ⅶ. Amioca showed higher iodine affinity of soluble amylose than other maize starches. The apparent viscosity of alkali gelatinization measured by Brookfield viscometer for Amaizo was $70{\pm}10^3cp$ which was higher than Amylomaize VII. The apparent viscosity of PFP was increased to $70{\pm}10^3cp$ and then decreased. As maize starches were autoclaved at $121^{\circ}C$ with starch : water ratio (1:9) and autoclaving-cooling cycle were up to 4 times, gel properties were measured by rheometer. Amaizo showed the highest value for hardness, adhesiveness, springiness, cohesiveness, and hardness of gel after two times of autoclaving-cooling cycles was the highest. Gel properties was thus affected by the chain length of amylose rather than amylose content.

• Solar Energy
• /
• v.7 no.2
• /
• pp.22-29
• /
• 1987

This paper dealed with thickness variation of bottom heat sotrage zone due to salinity and flow rate of extration hot brine in small test solar pond (0.5m wide, 0.5m high, 1.0m long). Testing apparatus and situation were follows: 7.1 cm of height of suction diffuser and 1.8cm of height of discharge diffuser above the test pond respectively, 0.3cm of slot size of suction diffuser, 1.0cm of slot size of discharge diffuser, 47cm of length of the slot; heating of hot water ($75^{\circ}C$) through separated hot water tank, discharge of the brine into storage zone through discharge diffuser, the extration of the brine through suction diffuser, circulation of the extracted brine through a heat exchanger (cooler). Following results were obtained through the experiments. 1. In small test solar pond, the typical three zone which showed up in real solar pond were established. 2. Richardson Number was used more effectively to confirm hydrodynamic stability of the stratified flow. 3. The thickness of non convective layer had a great effect on the heat storage of the bottom convective layer, then the temperature of bottom convective layer had a relation to that of upper convective layer. 4. Optimum operating condition in the test pond was on 10%-15% of salt concentration and $0.05m^3/hr$ of flow rate of extraction hot brine. 5. Following thickness of 3 zones were available to obtain under optimum operation condition: o bottom storage zone: $30%{\pm}10%$ of total pond depth o non-convective zone: $40%{\pm}10%$ of total pond depth o Upper surface zone: $20%{\pm}10%$ of total pond depth.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.19 no.3
• /
• pp.1-9
• /
• 2016

The objective of this study was to exam early stages of plant growth of Euonymus fortunei 'Emerald and Gold' and Hedera japonica grown in fabric felt bag attached on vertical greenery system with the ratio of hydrophilic polymer to substrate, 0(referred as Control), 0.1, 0.2, or 0.4% (v/v), in order to effectively utilize rainfall for low maintenance. After rainfall, the increase in volumetric water content of substrate amended with the hydrophilic polymer was between 13% and 87%, compared to that in Control. During drought period, higher ratio of hydrophilic polymer to substrate slowly decreased the volumetric water content, and increased plant height, leaf length, leaf width, number of leaves, branch number, and stem diameter of both Euonymus fortunei 'Emerald and Gold' and Hedera japonica with the highest fresh and dry weights of shoots or roots under the 0.1% ratio of hydrophilic polymer.

• Journal of Navigation and Port Research
• /
• v.35 no.6
• /
• pp.483-488
• /
• 2011

When a tug-barge navigates in the water, maneuvering ability of a tug is affected by the slewing motion of barge. Therefore it is necessary to decrease the slewing motion of a barge for safe towing work. We chose two different types of barge model and investigated their motion depending on the existence of bridle, towing speed and length of towline. The experiments are performed in the still water using the wire rope for the towline. A longer towline makes the heading angle smaller. The towing speed does not largely affect the turning of barge. Finally, it is noted that the bridle of a towing line decrease the slewing motion of barge more effectively.

• Polymer(Korea)
• /
• v.26 no.5
• /
• pp.653-660
• /
• 2002

The volume phase transition of poly(N-isopropylacrylamide) (PNIPAAm) and poly (N-isopropylacrylamide-co-sodium methacrylate) (P (NIPAAm-co-SMA)) hydrogels crosslinked with poly (ethylene glycol) diacrylate (PEGDA) was investigated in consideration of water content and surface area. The volume phase transition temperature of hydrogel was not affected by the concentration of crosslinking agent, which increased over 40$\^{C}$ by incorporating a small amount of SMA. Higher volume phase transition temperature was obtained when PEGAD was used as a crosslinking agent, suggesting that the chain length of crosslinking agent had a significant effect on the volume phase transition temperature. The surface area of PNIPAAm and P (NIPAAm-co-SMA) gels fell off around the volume phase transition temperature, resulting from the fact that the size of pores reduced remarkably in the course of the volume phase transition. Hence, the surface area and the pore size were considered to be important factors indicating the volume phase transition.