• Nutrition Research and Practice
• /
• v.10 no.6
• /
• pp.583-589
• /
• 2016

BACKDROUND/OBJECTIVE: Constipation is a condition that can result from intestinal deformation. Because humans have an upright posture, the effects of gravity can cause this shape deformation. Oligosaccharides are common prebiotics and their effects on bowel health are well known. However, studies of the physiological functionality of a product that contains both lactulose and galactooligosaccharides are insufficient. We investigated the constipation reduction effect of a dual-type oligosaccharide, Dual-Oligo, in loperamide-treated rats. MATERIALS/METHODS: Dual-Oligo consists of galactooligosaccharides (15.80%) and lactulose (51.67%). Animals were randomly divided into four groups, the normal group (normal), control group (control), low concentration of Dual-Oligo (LDO) group, and high concentration of Dual-Oligo (HDO) group. After 7 days of oral administration, fecal pellet amount, fecal weight, watercontent of fecal were measured. Blood chemistry, short-chain fatty acid (SCFA), gastrointestinal transit ratio and length and intestinal mucosa were analyzed. RESULTS: Dual-Oligo increased the fecal weight, and water content of feces in rats with loperamide-induced constipation. Gastrointestinal transit ratio and length and area of intestinal mucosa significantly increased after treatment with Dual-Oligoin loperamide-induced rats. A high concentration of Dual-Oligo tended to produce more acetic acid than that observed for the control group, and Dual-Oligo affected the production of total SCFA. Bifidobacteria concentration of cecal contents in the high-concentration oligosaccharide (HDO) and low-concentration oligosaccharide (LDO) groups was similar to the result of the normal group. CONCLUSIONS: These results showed that Dual-Oligo is a functional material that is derived from a natural food product and is effective in ameliorating constipation.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.57 no.5
• /
• pp.129-137
• /
• 2015

The objective of this study was to test the non-point source pollution (NPS) control by the vegetated ridge and silt fence through field monitoring. The experiment plots were established with three sizes which are 5 m width by 22 m length with 8 %, 3 % slope and 15m width by 15 m length with 6 % slope. Flumes with the floating type stage gages were installed at the outlet of each plot to monitor the runoff. For a rainfall monitoring, tipping bucket rain gage was installed within the experiment site. Water quality samples were monitored during the heavy rainfall occurred. The amount of rainfall from 4 monitored events ranged from 27.6 mm to 130 mm. The runoff reduction rate could vary depending on slope, soil, crop growth condition, rainfall amount, rainfall intensity, antecedent moisture condition, and many other factors. The runoff from vegetated ridge and silt fence treatment plots was 24.05 % and -8.28 % lower than that from control plot, respectively. The monitoring results showed that the average pollution loads reduced by vegetated ridge compared to control were BOD 36.62~53.60 %, SS 40.41~73.71 %, COD 39.34~56.41 %, DOC 49.08~53.67 %, TN 26.74~67.23 %, and TP 52.72~91.80 %; by silt fence compared to control were SS 41.73 %, COD 1.93 %, and TN 2.38 %. The paired t-test result indicated that the vegetated ridge and silt fence were statistically significant effect in SS load reduction, with a 5 % significant level. Monitored results indicated that vegetated ridge and silt fence were both effective to reduce the pollutant from the field surface runoff.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.6 no.6
• /
• pp.113-131
• /
• 1998

The objective of the present study is to investigate the characteristics of the dividing flow in the laminar flow region. Using glycerine water solution(wt43%) for Newtonian fluid and the polymer of viscoelastic fluid(500wppm) for non-Newtonian fluid, this research investigates the flow state of the dividing tube in steady laminar flow region of the two dimensional dividing tube by measuring the effect of Reynolds number, dividing angle, and the flow rate ratio on the loss coefficient. In T- and Y-type tubes, the loss coefficients of the Newtonian fluid decreases in constant rate when the Reynolds number is below 100. The effect of the flow rate ratio on the loss coefficients is negligible. But when the Reynolds number is over 100, the loss coefficient with various flow rate ratios approach an asymptotic value. The loss coefficient of the non-Newtonian fluid for different the Reynolds number shows the similar tendency of the Newtonian fluid. And when the Reynolds number is over 300, the loss coefficient is approximately 1.03 regardless of flow rate ratio or the dividing angle. The aspect ratio does hardly influence the reattachment length and the loss coefficient of both Newtonian and non Newtonian fluid. The loss coefficient decreases as the Reynolds number increases. The loss coefficient of Newtonian fluid is larger than that of non-Newtonian fluid.

• Research in Plant Disease
• /
• v.9 no.1
• /
• pp.52-56
• /
• 2003

It was conducted to investigate the effect of rice downy mildew (RDM) infection to plant growth and yield components in water seeding stage, and to screen of varietal resistance to downy mildew. Being infected by rice downy mildew, chlorotic spot appeared in the leaf and leaf length was shortened. As the infected rice was growing, internode was not elongated properly and was deformed, and then panicle was not arised or mal-formed. Plant height of infected rice was shortened at all growth stage, and while the number of tillers of infected rice was more decreased than that of healthy plant before maximum tillering stage, and that of infected rice was more increased after heading stage. While the number of internode of infected tiller was much increased than that of healthy tiller internode length of infected tiller was shorter. As the rice infected by RDM severely, the number of panicles per square meter and ripening of rice was more decreased and yield of rice was extremely much decreased. As result of the varietal resistance screening with rice seedling, Geyh-wabyeo and Donjinbyeo were resistant varieties to downy mildew.

• Journal of the Korean Geotechnical Society
• /
• v.24 no.12
• /
• pp.93-101
• /
• 2008

This paper presents the results of numerical investigation on support mechanism of geogrid-encased stone columns for use in soft ground improvement. A number of cases were analyzed using a 3D stress-pore pressure coupled model that can effectively model construction sequence and drainage as well as reinforcing effects of geogrid-encased stone columns. The results indicated that the geogrid encasement provides additional confinement effect that reduces vertical stress in the soft ground, thus resulting in less excess pore water pressures and associated settlement. Also revealed was that such a confinement effect depends on encasement length and stiffness of geogrid. It is also shown that there exist critical encasement length and stiffness of geogrid for a given condition.

• Structural Engineering and Mechanics
• /
• v.63 no.4
• /
• pp.567-574
• /
• 2017

Sedimentation tanks are essential structures to filter the suspended sediments in the inlet flow which are constructed at the inlet of the basins forked from rivers and irrigation canals. The larger the constructed tank, the better the sedimentation process is conducted. However, the construction and dredging costs increase. In this regard, improving the performance and sedimentation efficiency seem necessary by alternative methods. One of these effective methods is using baffle plates. Most of the studies carried out in this field are on the use of these baffles in the primary and secondary sedimentation tanks. Hence, this study is carrier out with the objective of increasing the retention efficiency in the irrigation sedimentation tanks using baffles. To reach this goal, the experiments were carried out in a flume with length 8 meters, width 0.3 meters, and height 0.5 meters, considering a sedimentation tanks with a length of 3 meters, in three different inlet concentration, three flow rates and three Froude numbers. The baffles were mounted at the bottom of the tank and the effects of the angle, height and position in the tanks were investigated. The results showed that on average, employing the baffles increased the sedimentation efficiency 5 to 6% and the highest value was obtained for angle 60 with respect to the flow direction. According to the results of this study, the most favorable height and position of these baffles were obtained to be in 40% of the depth of the flow and 50% of the length of the sedimentation tank, respectively. Also, by increasing the number of baffles, the sedimentation efficiency decreased. Regarding the sedimentation regions in this case, more than 80% of the settled sediments were observed in the middle of the tank measured from the inlet.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.37 no.6
• /
• pp.485-491
• /
• 2004

Spawning induction, egg development and larval growth of ark shell (Tegillarca granosa) (L.) were investigated. The most effective method of spawning induction was steady temperature increasing from$4^{\circ}C\;to\;28^{\circ}C$ with irradiation of sea water by UV after T. granosa was exposed to air at $4^{\circ}C$ Optimum condition for larval roaring was under the 32.4 psu and two temperature $regimes:\;28{\pm}1^{\circ}C\;and \;25{\pm}1^{\circ}C$. Fertilized eggs was demersal isolated eggs, and egg diameter was $60{\mu}$. D-shaped larvae appear about 20 hr after hatching with $94.1{\mu}$ in shell length and $86.7{\mu}$ in shell height. Ten days were required from hatching to umbo larva stage, of a mean shell length $125.2{\mu}$. On 25th day, the larva grew to $450{\mu}$ in shell length and began to settle on the bottom. Effect of temperature between $25^{\circ}C$ (control group) and $28^{\circ}C$ on larval growth was not different. Survival rate of larvae settled on the bottom was about $19{\%}$ in both temperatures conditions $(25^{\circ}C\;and\;28^{\circ}C)$.

• Applied Chemistry for Engineering
• /
• v.10 no.8
• /
• pp.1200-1209
• /
• 1999

Prediction model was composed by optimal parameter estimation from best fitting on reactant temperature profile, inlet and outlet temperature of coolant and yield of dual fixed-bed catalytic reactor(FBCR) which was measured in the industrial field. In order to design the FBCR which could obtain maximum conversion and yield, we investigated the effect of catalyst bed length and reactor radius changes. An uniform activity FBCR showed the best performance at z = 2.8 m of total catalysst bed length in case of reactor radius r = 0.01241 m and z =2.80 m(upper layer: 1.88 m, lower layer: 0.92 m) under reactor radius r = 0.01254 m for a dual activities FCBR. In case of reactor radius changes, the axial temperature profile and maximum radial temperature was rapidly risen for radius increase. The reactor radius decrease showed the opposite result.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.19 no.6
• /
• pp.955-967
• /
• 1995

This study was performed to investigate the physical and chemical properties of the 5 kinds of fabrics dyed with persimmon juice and undyed fabrics. The difference between dyed and undyed fabrics was checked experimentally. Obtained results are as follows. 1. Bending length and flex stiffness were increased after dyeing, and tensile strength of waif i3l fabrics except Ramie was also increased. 2. Abrasion resistance was improved in Ramie and Hemp after dyeing but the rest of fabrics were decreased. 3. Crease resistance of dyed fabrics was roughly worse than that of undyed fabrics. 4. Air permeability remarkably increased after dyeing and this fact estabilished that the traditional Gal-01 was cool clothing. 5. Water repellency in Cotton 1 and Polyester rises but the rest of fabrics were not changed. Therefore it is found that this repellency related to the their fabric counts. 6. Blocking effect of UV light and visible ray was increased in all dyed fabrics. Especially dyed Cotton 1 and Polyester blocked UV light almost perfectly. 7. The colorfastness to soaping and sunlight was proved to less than 3 grade in all fabrics after dyeing. It indicates that this colorfastness became worse owing to dyeing. 8. The colorfastness to dry cleaning and water was decided to more than 3 grade in all fabrics. 9. The colorfastness of the dyed fabrics to sweat after exposing to man-made acid sweat solution was good so that was decided above 3 grade. However after exposing to man-made alkalic sweat solution it became worse owing to dyeing.

• Journal of the Korean Society of Safety
• /
• v.25 no.3
• /
• pp.78-82
• /
• 2010

This study is to test insulation mortar mixed with wastepaper and sawdust to find out its insulation performance. Therefore, wastepaper and sawdust have been added to normal mortar. They are analyzed for the above purpose using compressive strength and insulation performance. It is found that the more wastepaper and sawdust will be mixed, the lower heat conductivity will be taken. Wastepaper and sawdust mixture will be more 2.0% then the insulation mortar quality can be compatible with the 3rd kind of the standard. Optimal mixture for insulation will be wast paper:sawdust=4:6. Cohesive test of materials showed that test material has stronger than stand are $0.10N/mm^2$. It is satisfactory the test result showed a range of $0.12{\sim}0.15N/mm^2$ from the test result. Optimal mixture of wastepaper and sawdust have been found out from the study comprehensively, exclusive of the proportion of wastepaper:sawdust = 8:2. It is thought that standard of length deformation; 0.5% is reasonable. This means that deformation of mortar itself can be considered. But it is also Shown that water mixture has also been sharply changed at first flow test. Therefore, it is thought that absorbed water content in the material gave considerable effect to variation rate.