• Journal of the Korean GEO-environmental Society
• /
• v.13 no.7
• /
• pp.31-38
• /
• 2012

Water glass chemical grouts are primarily used in ground injection projects. Natural and Durable Stabilizer (NDS), Space Grout Rocket (SGR), and other similar materials composing of inorganic accelerating agents with ultra fine cement have been gaining popularity as ground improvement material in South Korea. However, there are questions as to grouting results and environmental issues caused by NDS grout. This study uses the injection method in mudstone embarkment to evaluate the differences in strength, permeability, and optimum injection volume through the use of uniaxial and triaxial compression tests and fish poison tests for NDS and SGR materials. After 28 days, results showed SGR and NDS to have a 50% increase in strength and 50% decrease in permeability with the proper injection rate at 50%.

• Asian-Australasian Journal of Animal Sciences
• /
• v.12 no.1
• /
• pp.28-35
• /
• 1999

The effects of addition of celulases (A cremonium cellulolyticus and Trichoderma viride, CE), a commercial inoculum containing lactic acid bacteria (Lactobacillus casei, LAB), fermented green juice (macerated napier grass with water was incubated anaerobically with 2% glucose for 1 day, FGJ) and glucose (G), and regional difference of ensiling on napier grass (Pennisetum purpureum Schum.) silage were studied by using 900 ml laboratory glass bottle silos under 30 and $40^{\circ}C$ storage conditions in 1995 and 1996. Experiment 1 was carried out to compare the addition of CE, LAB, FGJ and the combinations. Silages were stored for 45 days after ensiling. Experiment 2 studied the effects of applications of CE, LAB, FGJ and G. Experiment 3 was carried out using the similar additives as experiment 2 except for LAB. Silages were stored for 60 days in the experiments 2 and 3. Experiments 1 and 2 were done in Nagoya, and experiment 3 in Okinawa. Sugar addition through CE or G improved the fermentation quality in all the experiments, which resulted in a greater decrease in the pH value and an increased level of lactic acid, while butyric acid contents increased under $30^{\circ}C$ storage condition in CE addition. LAB and FGJ additions hardly affected the silage fermentation quality without additional fermentable carbohydrate. But the combination of LAB, FGJ and glucidic addition (CE and G) improved the fermentation quality. The effect of the regional difference of ensiling between temperate (Nagoya; $35^{\circ}$ N) and subtropical (Okinawa; $26.5^{\circ}$ N) zones on silage fermentation quality was not shown in the present study.

• Restorative Dentistry and Endodontics
• /
• v.27 no.4
• /
• pp.389-393
• /
• 2002

The marginal integrity of the crown can be broken during endodontic access cavity preparation due to the vibration of burs. Therefore, the purpose of this study was to evaluate the effect of endodontic access cavity preparation on the marginal leakage of full veneer gold crowns. 24 intact molars were mounted in acrylic resin blocks and prepared for crowns by a restorative dentist and crowns were cast with gold alloy. 20 Crowns were cemented with glass ionomer cement and 2 crowns were not cemented for positive control. 200 thermo-cycles from 5$^{\circ}C$ to 5$0^{\circ}C$ with a travel time of 20s were completed. Then samples were randomly divided into 2 experimental groups of 9 each. Endodontic access preparation and zinc-oxide eugenol temporary fillings were done in Group 1. Teeth in Group 2 were not treated. Samples were coated with 2 layers of nail varnish and were immersed in 1% methylene blue dye for 20 hrs. Endodontic access was prepared in 2 samples, which were coated with nail varnish on all surfaces for negative control. After washing in running water gold crowns were cut with a #330 bur. Four buccolingual sections, 2 mm apart, were cut from the central section of each tooth and were examined and scored under the microscope for dye leakage. Score 1: leakage to the cervical 1/3 of the axial wall, Score 2: leakage to the middle 1/3 of the axial wall, Score 3: leakage to the coronal 1/3 of the axial wall, Score 4: leakage to the occlusal surface. The median value for Group 1 is 4 and for Group 2 is 2. The result of this study showed that samples in Group 1 leaked more than those in Group 2. This finding was significant(P<0.001).

• Journal of Korean Society for Atmospheric Environment
• /
• v.25 no.5
• /
• pp.382-391
• /
• 2009

The aim of the study was to assess the levels in typical central borough of phthalate exposure by monitoring children's facilities (19 kindergartens and 21 elementary schools) and households (17 old apartments and 22 new apartments) via sampling indoor floor dust. A vacuum cleaner specifically prepared for sampling dust was attached to a filter of a vacuum cleaner dust collecting container. During the sample preparation process, containers made of glass were used and analysis was performed using GC-MSD. The mean concentration of DEHP was $412{\mu}g/g$, DnBP was $24{\mu}g/g$, and BBzP was $10{\mu}g/g$ dust. The indoor characteristics including floor, wall materials, years after construction, water leakage history for the past three years, and ventilation were also examined to categorize phthalate esters from the dust samples. From the flooring and wallpaper materials of kindergartens and elementary schools, DEHP in the dust sample appeared at a statistically significant level (p<0.05) when PVC materials were present. DEHP in the indoor dust also increased significantly (p<0.01) during the construction period. The daily intake of DEHP measured from indoor dust was 0.08~$19.7{\mu}g/kg/day$ for children and 0.02~$1.1{\mu}g/kg/day$ for adults (women). The results clearly revealed that phthalate exposure is greater in children than in adults (women) due to the indoor dust.

• Composites Research
• /
• v.13 no.1
• /
• pp.78-88
• /
• 2000

Tribological properties of fiber composite materials were measured and wear resistant hybrid structure was proposed based upon the understanding of tribological behavior of the composite materials. Unidirectional composites with glass fibers, carbon fibers, and aramid fibers were tested for tribological properties in order to propose a wear resistant hybrid structure. Hybrid composites which contain carbon and aramid fibers were prepared, the specimens were sliced by a water-jet cutter, and friction and wear properties were measured. An experimental set-up was designed and built for the friction and wear test of the composite specimens. Unidirectional fiber composite and hybrid composite specimens were tested to evaluated the tribological behavior for biomimetic applications. It is observed that the friction and wear behavior of fiber composites depends upon fiber orientation, sliding speed, and type of reinforcing fibers.

• Food Science and Preservation
• /
• v.12 no.3
• /
• pp.292-298
• /
• 2005

Kochujang(Korean red pepper paste) of 600 g was fermented in the different types of vessels (glass, polypropylene(PP), polyethylene terephthalate(PET), stainless steel and Korean porcelain called onggi) with 627 mL of volume during 4 months. The quality changes were monitored for physical, chemical and microbiological attributes. Onggi which had high porosity in the micro-structure provided kochujang with higher microbial counts of aerobic bacteria, lactic acid bacteria and yeasts than those of the other containers. Compared to kochujang fermented in the other containers, kochujang in Onggi showed higher protease activity, amino type nitrogen, and free amino acid content. The kochujang in Onggi also attained higher acidity, lower pH and higher reducing sugar concentration than those in the other containers. All changes were completed 2 or 3 months. Onggi showed water loss and salt increase of the kochujang comparable to those in the other vessels, which was from gradual clogging of the micropores during storage. All physical, chemical and microbiological changes made the kochujang in Onggi attain the sensory quality significantly better than those fermented in the other vessels.

• Journal of the Korean Ceramic Society
• /
• v.43 no.2 s.285
• /
• pp.114-120
• /
• 2006

Nano-size Au particle doped $TiO_2$ films were prepared with $Ti(OC_3H_7^i)_4$, polyvinylpyrrolidone(PVP), $HAuCl_4$ and $C_3H_7OH$ etc. by sol-gel method. $TiO_2$ gel films were obtained by the dip-coating method on the $SiO_2$ glass substrates, and then heat-treated at $700^{\circ}C$ for 10 min. The thickness of $TiO_2$ films were $0.7\~1.8\;{\mu}m$. It was found that the thickness of films prepared from PVP containing solution was about $2\~8$ times higher values than that of thin films without PVP. The size of Au particles doped in the films were about $350\~750\;nm$. Nano-size Au particle dispersed $TiO_2$ films showed high absorption peak at visible region 450nm, which made them good candidates for non-linear optical materials and photo-catalytic materials. The contact angle of $TiO_2$ film for water was $12.5^{\circ}$, and therefore it is clear that $TiO_2$ films have very high hydrophilic properties and the self-cleaning effects.

• Journal of the Korean Ceramic Society
• /
• v.19 no.2
• /
• pp.133-138
• /
• 1982

Two kinds of clinker liquid melts, one containing 2.0% of $K_2O$ and the other without $K_2O$, were prepared with the similar composition as those developed during the firing of portland cement clinker. One portion of melt was quenched and found to consist of glass together with traces of proto-$C_3A$, and the other portion was allowed to cool spontaneously to crystallize $C_3A$ and calciumferrite well. The product obtained by crystallization of the melt without $K_2O$showed cubic $C_3A$, while orthorhombic $C_3A$ was formed from the crystallized product containing $K_2O$. Studies on the hydration behavior of the samples made from the melts with 30% of gypsum were carried out for 24 hours by observation at regular intervals ettringite, monosulphate hydrates and gypsum which were formed or consumed during hydration. The samples without $K_2O$ in the melts were hydrated wth addition of proper amount of $K_2SO_4$ in the water for hydration. Hydration behavior of glassified $C_3A$ showed that it has low reactivity relative to crystallized $C_3A$, and also hydration reactivity of orthorhombic $C_3A$ was much lower than that of cubic $C_3A$ in 60 minutes. Potassium sulphate in the solution reduced the hydration reactivity of $C_3A$ . Evolution peaks of hydration heat examined by twin-type conduction micro-calorimeter showed that glassified $C_3A$ without $K_2O$ had secondary peak after 9 hours and $C_3A$ containing $K_2O$ after 12 hours. When crystallized $C_3A$ was hydrated, initial peaks of hydration heat were considerably high and there was no secondary peak for cubic $C_3A$ but the secondary peak of orthorhombic $C_3A$ appeared after 4 hours.

• Journal of the Korean Electrochemical Society
• /
• v.3 no.1
• /
• pp.57-62
• /
• 2000

Sulfonated Polysulfone (SPSF) cation-exchange membranes were synthesized by introducing various ratio of chlorosulfuric acid (CSA) onto the main chain of polysulfone (PSF). Properties such as ion exchange capacity, water content, liked ion concentration, and partition coefficient were measured, respectively. Through the analysis of DSC and TGA, it has been shown that glass transition temperature increased and weight loss decreased as sulfuric acid group concentration increased. Structure of membrane measured by AFM and SEM was seen to be asymmetric. Apparent diffusion coefficient of sodium ions through SPSF membrane by AC impedance was increased as sulfuric acid group concentration increased.

• Applied Chemistry for Engineering
• /
• v.2 no.4
• /
• pp.340-347
• /
• 1991

Siloxane containing copolyimide (SPI) was synthesized from 3, 3', 4, 4'-benzophenonetetracarboxylic dianhydride(BTDA), 4, 4'-methylene dianiline(MDA), 4, 4'-oxydianiline(ODA) and amine-terminated polydimethyl-siloxane(PDMS). Homopolyamic acid(HPAA) in tetrahydrofuran(THF) was reacted with PDMS to obtain siloxane containing polyamic acid(SPAA) followed by the thermal curing to manufacture SPI. SPAA and HPAA exhibited inherent viscosity value of 0.35~0.48dl/g. Glass transition temperature of SPI ranged in $258^{\circ}C{\sim}264^{\circ}C$. SPI had a lower $T_g$ than that of HPI. ODA based HPI and SPI showed slightly higher $T_g$ values, thermal stability, and water content.