• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.5B
• /
• pp.447-457
• /
• 2006

This paper presents a numerical model for the simulations of 2D depth-averaged flows. The shallow water equations are solved numerically by the Characteristic Dissipative Galerkin (CDG) finite element method. For validation, the developed model is applied to the hydraulic jump. The computed results are compared with the analytical solution, revealing good agreement. In addition, flow in a contracting channel showing standing waves is simulated. The calculated water surface profile appears to be qualitatively consistent with the observed data. The foregoing results indicate that the model is capable of simulating the abrupt change in flow field. Next, the model is applied to the flow in a $180^{\circ}$ curved channel. The simulated results show that the velocity near the inner bank is faster than that near the outer bank and the water depth near the inner bank is shallower than that near the outer bank. However, the simulated results show that the velocity distribution across the channel is almost uniform in the bend except the reach close to the end of the bend. This is due to the limitation of the governing equations in which the transverse convection of momentum by the secondary flows along a channel bend is not taken into account.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.21 no.6
• /
• pp.323-330
• /
• 1988

The spatial distribution of sea water temperature variation pattern in the South-eastern coastal region of Korea was studied by empirical orthogonal function (E. O. F) analysis in several depths from surface to 300m using the monthly mean water temperature averaged for 23 years, water mass analysis by T. S diagram and sectional diagram of water temperature. Typical type of water temperature variation in this area can be divided into surface (0m-50m), subsurface (100m-150m) and intermediate (200m-300m) layer. The first mode value of water temperature change on the surface layer showed $99\%$ of total variation, and decreased with the increase of the depth. It is deduced to be in the range of $60-70\%$ on the 300m layer. The representative type of water temperature fluctuation by the first mode in each layer is as follows. Water temperature change in the surface layer showed a seasonal variation. In the subsurface layer, it is governed by the interaction of the Tsushima Warm Current water with the cold water and by the heat transfer process from the upper layer. In the intermediate layer, water temperature variation seems to be governed by the advection of the bottom cold water.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2001.09a
• /
• pp.92-96
• /
• 2001

Although the problem of seawater intrusion at the coastal aquifer was recognized before over one hundred years at the coastal aquifer, much groundwater keep on being salinitized by several reasons such as groundwater exhaustion, coastalline change, and human activities. The horizontal and vertical electrical soundings and geostatistical methods were used to define the local characteristics of saltwater intrusion and to estimate the saltwater interface in the southeastern area of the Pusan City. The 24 points of the Schlumberger vertical electrical soundings(VES) to loom depth and the 2 lines of dipole-dipole horizontal soundings are peformed. The resistivity data have lognormal distributions. The horizontal extents of saline water intrusion were estimated from the inversion of horizontal prospecting data. Lognormal ordinary kriging is used in A-A' resistivity profiles on May and July because the data have stationary models in semivariograms. Lognormal IRF-k kriging is used for the isopleth maps using vertical resistivity data. The 10 ohm-m resistivity line on the isopleth maps of 21m, 30m, 50m, and 70m depth using resisitivity data measured in July is sifted to the east, cpomparing that of the isopleth maps measured in May. The kriged vertical and horizontal resistivity isopleth maps suggested that the geostatistical methods can be used to define the variation of earth resistivity distribution at the saltwater interface.

• Journal of Fisheries and Marine Sciences Education
• /
• v.29 no.1
• /
• pp.257-269
• /
• 2017

The occurrence variations of decapods by season and depth off Oryuk Islets, Busan were investigated at seven stations in April and October 2009, July 2010 and January 2011. Decapods were collected by SCUBA diving at 5 m and 10 m depths. 46 species belonging to 18 families in 3 orders were identified. Pilumnus minutus, Pugettia intermedia, Pachycheles stevensii, and Paguristes japonicus were dominant species, comprising 73.0% of total decapods. P. minutus and P. intermedia were abundant in all seasons (except summer) while P. stevensii and P. japonicus were abundant in fall and summer. Dominant species were divided into three groups (resident species, seasonal species and temporary species) on the basis of their occurrence patterns. P. minutus and P. intermedia were resident species while P. stevensii, P. japonicus were temporary species. The species number, density and biomass of decapods were fluctuated by seasons. They were highest in fall and lowest in winter. This study implied that the variations of species number and density of decapods were significantly related with seasonal change of water temperature.

• 한국해양학회지
• /
• v.18 no.1
• /
• pp.43-48
• /
• 1983

Oceanic temperature inversions, with unstable stratifications, are frequently founed in the surface layer of a few tens meters in the Japan Sea and the Yellow Sea in Winter. Mechanisms responsible for the generation of temperature inversions include the followings: (1) The nat heat loss at the sea suface requires an upward transport of heat from the interior of the ocean y convection, and this convection leads to the temperature inversions. (2) The downward propagation of the annual variation of the sea surface timperature, with an exponential decrease of amplitude and a linear change of phase with depth, generates the surface inversion layer in winter. (3) The cold water cdvection by Ekman drift, of which magnitude decreases exponentially with depth, generates temperature inversions for the three possible mechanisms mentioned above.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.13 no.2
• /
• pp.95-104
• /
• 2010

The purpose of this study is to analyze the correlation between physical stream characteristics and bed materials in natural rivers. Accordingly, four natural rivers were selected reference streams, they were Nam river, Sumjin River, Naesung River and Han River. Grain size distributions of bed materials were gravels, cobbles and boulders in Han river and Nam river, were sand, gravels, cobbles and boulders in Sumjin river and were sand in Naesung river. Four reference streams were divided into each two reference reaches (straight and bend) by plan and profile characteristics of naturally meandering stream. Therefore various reference reaches were chosen in the aspect of physical stream characteristics and grain size distributions. The results investigated and analyzed are as follows. The streams that grain sizes distributions of river bed materials were coarse were stable because they had variety of bed slope without sediment deposition, and then the riffles frequency and the physical characteristics were various. Also, velocitydepth regime were various in four kinds, and the response parts for water level change were small, so that channel flow status were stable and excellent condition. On the other hand, sand river that grain sizes distributions of river bed materials were fine had not the variety of parameters as velocity-depth regimes, sediment deposition, channel flow status and riffles frequency, so that the physical stream characteristics were not various.

• Journal of the Society of Naval Architects of Korea
• /
• v.52 no.3
• /
• pp.206-221
• /
• 2015

Supercavitation is a modern technique which can be used to surround an underwater vehicle with a bubble in order to reduce the resistance of the vehicle. When the vehicle is at low speed in the deep sea, the cavitation number is relatively big and it is difficult to generate a cavity large enough to envelope the vehicle. In this condition, the artificial cavity, called ventilated cavity, can be used to solve this problem by supplying gas into the cavity and can maintain supercavitating condition. In this paper, a relationship between the ventilation gas supply rate and the cavity shape is determined. Based on the relationship a ventilation rate control is developed to maintain the supercavitating state. The performance of the ventilation control is verified with a depth change control. In addition, dynamics modeling for the supercavitating vehicle is performed by defining forces and moments acting on the vehicle body in contact with water. Simulation results show that the ventilation control can maintain the supercavity of an underwater vehicle at low speed in the deep sea.

• Geomechanics and Engineering
• /
• v.19 no.1
• /
• pp.1-9
• /
• 2019

Shallow failures occur frequently in both engineered and natural slopes in expansive soils. Rainfall infiltration is the most predominant triggering factor that contributes to slope failures in both expansive soils and clayey soils. However, slope failures in expansive soils have some distinct characteristics in comparison to slopes in conventional clayey soils. They typically undergo shallow failures with gentle sliding retrogression characteristics. The shallow sliding mass near the slope surface is typically in a state of unsaturated condition and will exhibit significant volume changes with increasing water content during rainfall periods. Many other properties or characteristics change such as the shear strength, matric suction including stress distribution change with respect to depth and time. All these parameters have a significant contribution to the expansive soil slopes instability and are difficult to take into consideration in slope stability analysis using traditional slope stability analysis methods based on principles of saturated soil mechanics. In this paper, commercial software VADOSE/W that can account for climatic factors is used to predict variation of matric suction with respect to time for an expansive soil cut slope in China, which is reported in the literature. The variation of factor of safety with respect to time for this slope is computed using SLOPE/W by taking account of shear strength reduction associated with loss of matric suction extending state-of-the art understanding of the mechanics of unsaturated soils.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2009.05a
• /
• pp.529-534
• /
• 2009

Climate models, both global and regional, have increased in sophistication and are being run at increasingly higher resolutions. The Land Surface Models (LSMs) coupled to these climate models have evolved from simple bucket models to sophisticated Soil-Vegetation-Atmosphere Transfer (SVAT) schemes needed to support complex linkages and processes. However, some underpinnings of terrestrial hydrologic parameterizations so crucial in the predictions of surface water and energy fluxes cause model errors that often manifest as non-linear drifts in the dynamic response of land surface processes. This requires the improved parameterizations of key processes for the terrestrial hydrologic scheme to improve the model predictability in surface water and energy fluxes. The Common Land Model (CLM), one of state-of-the-art LSMs, is the land component of the Community Climate System Model (CCSM). However, CLM also has energy and water biases resulting from deficiencies in some parameterizations related to hydrological processes. This research presents the implementation of a selected set of parameterizations and their effects on the runoff prediction. The modifications consist of new parameterizations for soil hydraulic conductivity, water table depth, frozen soil, soil water availability, and topographically controlled baseflow. The results from a set of offline simulations are compared with observed data to assess the performance of the new model. It is expected that the advanced terrestrial hydrologic scheme coupled to the current CLM can improve model predictability for better prediction of runoff that has a large impact on the surface water and energy balance crucial to climate variability and change studies.

• Journal of Korea Water Resources Association
• /
• v.53 no.4
• /
• pp.285-291
• /
• 2020

The Noah 3.3 Land Surface Model (LSM) was used to estimate the global soil moisture in this study and these soil moisture datasets were assessed against satellite-based and reanalysis soil moisture products. The Noah 3.3 LSM simulated soil moistures in four soil layers and root-zone soil moistures defined as a depth-weighted average in the first three soil layers (i.e., up to 1.0 m deep). The Noah LSM soil moisture products were then compared with a satellite-based soil moisture dataset (European Space Agency Climate Change Initiatives (ESA CCI) SM v04.4) and reanalysis soil moisture datasets (ERA-interim). In addition, the five major basins (Yangtze, Mekong, Mississippi, Murray-Darling, Amazon) were selected for the assesment with the Gravity Recovery and Climate Experiment (GRACE)-based Total Water Storage Anomaly (TWSA) and TWS Change (TWSC). The results revealed that high anomaly correlations were found in most of the Asia-Pacific regions including East Asia, South Asia, Australia, and Noth and South America. While the anomaly correlations in the Murray-Darling basin were somewhat low, relatively higher anomaly correlations in the other basins were found. It is concluded that this study can be useful for the development of soil moisture based drought indices and subsequently can be helpful to reduce damages from drought by timely providing an efficacious strategy.