• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 A
• /
• pp.425-427
• /
• 2000

The purpose of this study is to find the cause of the damage to the GCB(Gas Circuit Breaker), since the GCB of the 154kV power plant at the Hap-Cheon Dam has already been damaged twice. We researched the characteristics of this class of circuit breaker and the possible causes for this type of damage to the GCB using the FTA(Fault Tree Analysis) Method. We studied the optimal maintenance method of the GCB, the stability analysis and power serge protection of Hap-Cheon Dam, and the power serge and fault list of the power transmission line to help prevent a reoccurrence of the problem.

• 한국표면공학회지
• /
• 제48권6호
• /
• pp.349-353
• /
• 2015

In this paper, arc thermal spray coating was conducted onto the SS400 steel using Inconel 625 wires in order to improve the durability of marine steel structures, and then investigated cavitation damage behavior of Inconel 625 coating layer in sea water. For the Inconel 625 coating layer, surface hardness appeared similar to that of existing high velocity oxy-fuel coating technology with 380~480 HV, but the porosity of about 6 % was larger relatively. During the cavitation experiment, pit damages were originated and grown at the rough surface and pore defect area of Inconel 625 coating layer. And, after the 72 hours of experimental time, weight loss of Inconel 625 coating layer exhibited gradually increasing tendency due to surface damage effect of the undercut.

• 반도체디스플레이기술학회지
• /
• 제11권3호
• /
• pp.7-11
• /
• 2012

Among various wet cleaning methods, megasonic and jet spray gained their popularity in single wafer cleaning process for the efficient removal of particulate contaminants from the wafer surface. In the present study, we evaluated these two cleaning methods for particle removal efficiency (PRE) and pattern damage on the aluminum layered wafer surface. Also the effect of $CO_2$ dissolved water in jet spray cleaning is assessed by measuring PRE. It is observed that the jet spray cleaning process is more effective in terms of PRE and pattern damage compared to megasonic cleaning and the mixing of $CO_2$ in the water during jet sprays further increases the PRE. We believe that the outcome of the present study is useful for the semiconductor cleaning process engineers and researchers.

• 환경영향평가
• /
• 제21권1호
• /
• pp.93-104
• /
• 2012

In this research LCA methodology was adapted and analyzed in quantifying estimation of estuarine environment. The analysed objects of estuarine environment were construction methods, facility, and input material into water, and estuarine ecosystem. In this research the function of LCA of estuarine environment was river with the view of controling water, utilizing water, and hydrophilic function. According to the result of research, environmental damage indicator of facility was decreased 346 Pt from 453 Pt at pre-maintenance to 107 pt at post-maintenance. Among raw and subsidiary materials, remicon, stone-netting bag, and pebbles were showing heavy environmental load in the order. Evironmental impact of input material into water system was analyzed from 1,827 Pt environmental load before construction to 1,080 Pt of post-maintenance, and damage indicator was improved at 747 Pt. Water quality was improved from 1,827 Pt (before construction) to 1,080 Pt(after construction), and ecosystem was improved after maintenance. Environmental indicator in ecosystem was analyzed 427 Pt(before construction) to 348 Pt(after construction), and damage indicator of Sumnjingang riverine system was improved as much as 79 Pt. In the conclusion, estuarine environmental monitoring through LCA in the area of facility, input material into water and ecosystem showed that close-to-nature stream was 1,172 Pt better than artificial stream in environmental aspects.

• 대한본초학회지
• /
• 제29권5호
• /
• pp.91-95
• /
• 2014

Objectives : This study was carried out to evaluate whether the water extract from cause the cellular damage in HepG2 cell line. It was reported that Dictamnus dasycarpus Turcz(DDT) intake induce poisoning symptoms in human population. These symptoms was closely related to liver toxicity, however, mechanisms for liver toxicity caused by DDT have not been elucidated exactly. Here, hepatotoxicity caused by DDT was evaluated using HepG2 cell line. Methods : Water extract of DDT was treated into HepG2 cell with various doses such as 0, 0.1, 0.5, 1.0 and $5.0mg/m{\ell}$. In order to cell viability, both MTT and LDH assay were carried out. Also, apoptosis array kit was used to identify whether cell death caused by DDT is due to apoptosis or not. In addition, reactive oxygen species (ROS) was measured after treatment of water extract. Results : We found out significant changes in the apoptosis related factors of hepatocyte. The cell viability of HepG2 treated with DDT water extract was decreased in dose-dependent. Also most of the apoptosis related factors were significantly increased. We found out that Caspase 3, Cytochrome C and ROS had increased in dose-dependent. In addition, other apoptosis related factors Bcl 2 and Bax, which were also constant changes. However, there was no significance. Conclusions : These results suggest that water soluble extract of DDT is expected to have oral toxicity, including hepatocellular damage Therefore, it is suggested that DDT could cause various side effects and toxicity of clinical conditions.

• Structural Engineering and Mechanics
• /
• 제71권6호
• /
• pp.699-712
• /
• 2019

The reinforced concrete lining of hydraulic pressure tunnels tends to crack under high inner water pressure (IWP), which results in the inner water exosmosis along cracks and involves typical hydro-mechanical interaction. This study aims at the development, validation and application of an indirect-coupled method to simulate the lining cracking process. Based on the concrete damage plasticity (CDP) model, the utility routine GETVRM and the user subroutine USDFLD in the finite element code ABAQUS is employed to calculate and adjust the secondary hydraulic conductivity according to the material damage and the plastic volume strain. The friction-contact method (FCM) is introduced to track the lining-rock interface behavior. Compared with the traditional node-shared method (NSM) model, the FCM model is more feasible to simulate the lining cracking process. The number of cracks and the reinforcement stress can be significantly reduced, which matches well with the observed results in engineering practices. Moreover, the damage evolution of reinforced concrete lining can be effectively slowed down. This numerical method provides an insight into the cracking process of reinforced concrete lining in hydraulic pressure tunnels.

• Geomechanics and Engineering
• /
• 제15권1호
• /
• pp.677-686
• /
• 2018

Aimed at serious casing damage problem during the process of oilfield development by injecting water, based on seepage mechanics, fluid mechanics and the theory of rock mechanics, the multi-physics coupling theory was also taken into account, the mathematical model for production of petroleum with water flooding was established, and the method to solve the coupling model was presented by combination of Abaqus and Eclipse software. The Q9G3 block in Jibei oilfield was taken for instance, the well log data and geological survey data were employed to build the numerical model of Q9G3 block, the method established above was applied to simulate the evolution of seepage and stress. The production data was imported into the model to conduct the history match work of the model, and the fitting accuracy of the model was quite good. The main mechanism of casing damage of the block was analyzed, and some wells with probable casing damage problem were pointed out, the displacement of the well wall matched very well with testing data of the filed. Finally, according to the simulation results, some useful measures for preventing casing damage in Jibei oilfield was proposed.

• 대한본초학회지
• /
• 제26권4호
• /
• pp.95-99
• /
• 2011

Objective : In this study, we demonstrate the protective effect on oxidative DNA damage of leaf extracts from Abeliophylli distichi Folium via its antioxidant activity for the establishment of new value for the herbal medicine. Methods : Abeliophylli distichi Folium leaves were extracted with hot-water and ethylacetate (EtOAC). The 1,1-diphenyl-2- picrylhydrazyl (DPPH) radical and hydroxyl scavenging assay and $Fe^{2+}$ chelating assay were performed for antioxidative effect and ${\varphi}$X-174 RF I DNA cleavage assay and intracellular DNA damage assay were used for inhibitory effect of intracellular DNA damage. Results : In DPPH, Hydroxyl radical scavenging activity and $Fe^{2+}$ chelating activity of EtOAC extracts were 94.72%, 62.88%, 41.13%, and hot-water extracts were 88.86%, 56.7%, 37.4% at 200 ${\mu}g/m{\ell}$, respectively. Also, those extracts showed protective effect of DNA damage against the oxidative stress. Conclusion : These results indicated that the leaf extracts of Abeliophylli distichi Folium can be used as a natural antioxidants, which effectively inhibits the oxidative DNA damage.

• Computers and Concrete
• /
• 제12권1호
• /
• pp.65-77
• /
• 2013

This paper examines the dynamic response of an arch dam subjected to blast loading. A damage model is developed for three dimensional analysis of arch dams. The modified Drucker-Prager criterion is adopted as the failure criteria of the damage evolution in concrete. Then, Xiluodu arch dam serves as an example to simulate the failure behaviors of structures with the proposed model. The results obtained using the proposed model can reveal the reliability degree of the safe operation level of the high arch dam system as well as the degree of potential failure, providing a reliable basis for risk assessment and risk control.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2017년도 추계 학술논문 발표대회
• /
• pp.207-208
• /
• 2017

The current study assumed a condition in which concrete curing was not completed correctly in the winter, in order to analyze the effect of changes in early low-temperatures in early-frost damage depth. As a result, lower external temperature early on after depositing the concrete greatly reduced the temperature in the upper parts of the concrete, and it delayed the time during which the concrete temperature restored. In addition, for early-frost damages, lower early temperature increased the expansion of frozen water, which in turn relaxes the concrete structures and increases the absorption rate, ultimately extending the depth of early-frost damage.