• The korean journal of orthodontics
• /
• v.24 no.1 s.44
• /
• pp.37-62
• /
• 1994

This study was undertaken to investigate the three dimensional vascular changes of periodontal ligament following orthodontic tooth movement. Experimental tooth movement was carried out in 96 Sprague-Dawley rats with the weight of 250g. They were divided into four experimental groups (each 24 rats). The left maxillary first molar was moved mesially with 25g force in group I, and with 75g force in group II. Each three animals were sacrificed after 1, 6, 12, 24 hours, and 3, 7, 14, 21 days. In group III, 25g mesial force was applied for 3 days, and in group IV, 75g mesial force was applied for 3 days. Then the appliances were removed, and each three animals were sacrificed after 1, 6, 12, 24 hours, and 3, 7, 14, 21 days from removal of appliance. The contralateral molars were used for control group. Casting media was injected via left ventricle and polymerized in warm water. After corrosion of surrounding soft tissue, three dimensional vascular changes were examined using scanning electron microscopy. The findings of this study were as follows: 1. Pressure side of group I and II showed degenerative vascular changes such as vascular compression, reduction of vasculature, leakage of casting media. But, regenerative changes were dominant after 7 days of tooth movement. Although the degenerative vascular changes were more severe in group II, which was exposed to heavy force, the timing of these changes was not different between two groups. 2. Periodontal vasculature was reestablished by the growth of new capillaries and their differentiation and union from the remaining periodontal vessels and vessels of alveolar bone marrow. Although vascular regeneration was more rapid in group I, which was exposed to light force, the vasculature was not fully normalized in both groups even after 21 days. 3. There was no remarkable changes in tension side of group I and II, but looping of capillary, new capillary growth, dilation of vessels, redirection of vessels in the direction of tensile force were occurred. 4. In pressure side of group III and IV, in which appliance was removed after 3 days of orthodontic force, bone resorption was continued even after removal of appliance. Regeneration of vasculature was initiated after 1-6 hours, and it was more rapid in group III than group IV. In both groups, the vasculature was not fully normalized even after 21 days. 5. After removal of appliance, tension side of group III and IV showed vascular compression and loss of vasculature.

• Journal of the Korea Concrete Institute
• /
• v.16 no.3 s.81
• /
• pp.407-414
• /
• 2004

The purpose of this study is to evaluate the ability to resist chloride ions penetration of the concrete structure under marine environment in south-east asia especially. In this study, high strength concrete(HSC) with various combination of ordinary portland cement(OPC), blast-furnace slag(SG) and silica fume(SF) are cured 23 and $35^{\circ}C$ considering the site weather, and are cured in water for 3, 7 or 56 days respectively. And to investigate the fundamental properties and the resistance of chloride penetration of various HSC, setting time, slump flow, compressive strength, void and ASTM C 1202 test were conducted. Test results show that the compressive strength of HSC is similar regardless of SG replacement ratio and total charge passed of chloride is the smallest at 40% replacement of SG. The compressive strength of G4FS HSC is, besides, outstandingly high at early age compare with other HSC, but the compressive strength of G4F HSC, which is vary according to curing temperature and condition, most high at the age after 7 days. Total passed charge of HSC get larger in the order G4FS

• The Journal of Korean Academy of Prosthodontics
• /
• v.40 no.3
• /
• pp.296-305
• /
• 2002

The main disadvantage of cement-retained implant restorations is their difficulty in retrievability. Advocates of cemented implant restorations frequently state that retrievability of the restoration can be maintained if a provisional cement is used. The purpose of this study was to find the optimal properties of provisional luting cements and the surface treatment of abutments in single implant abutment system. 30 prefabricated implant abutments, height 8mm, diameter 6mm, 3-degree taper per side, with light chamfer margins were obtained. Three commercially available provisional luting agents which were all zinc oxide eugenol type ; Cavitec, TempBond and TempBond NE were evaluated. No cement served as the control. TempBond along with vaseline, a kind of petrolatum (2:1 ratio) was also evaluated. Ten out of thirty abutments were randomly selected and abutment surfaces were sandblasted with $50{\mu}m$ aluminum oxide. Another ten abutments were sandblasted with $250{\mu}m$ aluminum oxide. A vertical groove, 1 mm deep and 5mm long was cut in each twenty abutments. Ten of them were sandblasted with $50{\mu}m$ aluminum oxide. The full coverage casting crowns were cemented to the abutments with the designated provisional luting agent. Specimens were stored in distilled water at $37^{\circ}C$ for 24 hours. Each specimen was attached to a universal testing machine. A crosshead speed of 0.5mm/min was used to apply a tensile force to each specimen. Within the limitations of this in vitro study, the following conclusions were drawn: 1. Tensile bond strength of provisional luting cements in no surface treatment decreased with the sequence of TempBond NE, TempBond, Cavitec, TempBond with vaseline, no cement. 2. Tensile bond strength more increased by surface treatment. Sandblasting with $250{\mu}m$ aluminum oxide exhibited the highest tensile bond strength in the abutment cemented with TempBond NE and sandblasting with $50{\mu}m$ aluminum oxide exhibited the highest tensile bond strength in cemented with TempBond. 3. In the aspect of a groove formation, tensile bond strength significantly increased in TempBond with vaseline only and the others had no significant effect on tensile bond strength.

• The Journal of Advanced Prosthodontics
• /
• v.8 no.2
• /
• pp.94-100
• /
• 2016

PURPOSE. To evaluate the effects of hydrogen peroxide pretreatment and heat activation of silane on the shear bond strength of fiber-reinforced composite posts to resin cement. MATERIALS AND METHODS. The specimens were prepared to evaluate the bond strength of epoxy resin-based fiber posts (D.T. Light-Post) to dual-curing resin cement (RelyX U200). The specimens were divided into four groups (n=18) according to different surface treatments: group 1, no treatment; group 2, silanization; group 3, silanization after hydrogen peroxide etching; group 4, silanization with warm drying at $80^{\circ}C$ after hydrogen peroxide etching. After storage of the specimens in distilled water at $37^{\circ}C$ for 24 hours, the shear bond strength (in MPa) between the fiber post and resin cement was measured using a universal testing machine. The fractured surface of the fiber post was examined using scanning electron microscopy. Data were analyzed using one-way ANOVA and post-hoc analysis with Tukey's HSD test (${\alpha}=0.05$). RESULTS. Silanization of the fiber post (Group 2) significantly increased the bond strength in comparison with the non treated control (Group 1) (P<.05). Heat drying after silanization also significantly increased the bond strength (Group 3 and 4) (P<.05). However, no effect was determined for hydrogen peroxide etching before applying silane agent (Group 2 and 3) (P>.05). CONCLUSION. Fiber post silanization and subsequent heat treatment ($80^{\circ}C$) with warm air blower can be beneficial in clinical post cementation. However, hydrogen peroxide etching prior to silanization was not effective in this study.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.24 no.1
• /
• pp.148-172
• /
• 1997

Sixty human premolar teeth were used for this in vitro study. After each tooth was sectioned mesiodistally, one half was used for the experimental group and the other half for the control. Three groups were made for each fluoride applying method and twenthy teeth were assigned to each group. Ten teeth were used for evaluating total fluoride amount and the other ten were used for firmly-bound fluoride. Fluorshield was used for fluoride-releasing sealant and 1.23% APF, 0.05% NaF were used for topical application fluorides. Each tooth was cleaned with a tooth brush using nonfluoride containing pumice before the experiment. In the sealant group, fluoroshield was applied to the enamel surface without etching procedure and stored in $37^{\circ}C$ saline for 30 days. After 30 days, sealant was removed with explorer without scratching the enamel surface and washed with distilled water and dried. In the APF group, each tooth was immersed in 1.23% APF for 30 min then washed and dried in the same manner. In the NaF group, each tooth was immersed in 0.05% NaF for 24 hours then washed and dried as described above. After each fluoride regimen was applied, ten teeth were randomly selected from each group and immersed in 1M KOH solution for 24 hours to remove loosely-bound fluoride possibly deposited by the three different fluorides applied. In each group, total fluoride amount deposited and the amount of enamel removed by acid biopsy were calculated. After loosely-bound fluoride was removed, firmly-bound fluoride deposited and the amount of enamel removed by acid biopsy were also calculated. Total fluoride amount deposition was significantly increased in the APF and NaF groups, but not in the sealant group. Amount of enamel removed by acid-biopsy was also significantly diminished in the APF and NaF groups, but not in the sealant groups. After loosely-bound fluoride was removed from each groups, no statistical difference was found in the amount of firmly-bound fluoride in any groups. Also no effect of firmly-bound fluoride on enamel dissolution was shown in any groups after loosely-bound fluoride was removed from each group. In conclusion, topical application method of APF or NaF is more effective than fluoride-releasing sealant application to make $CaF_2$ coating on enamel surface and $CaF_2$ coating is the main source for anticariogenic effect of fluoride. However, longterm anticariogenic effect of fluoride-releasing sealant should be further evaluated.

• Journal of Environmental Health Sciences
• /
• v.42 no.6
• /
• pp.438-449
• /
• 2016

Objectives: Exposure to airborne bacteria is associated with adverse health effects such as respiratory and infectious diseases. This study evaluated airborne bacterial concentrations in the living rooms, kitchens, and toilets of 30 homes. Methods: Bacteria were sampled with an MAS100 impactor in three spaces in the subject homes between April 2014 and February 2015. Bacteria were grown on TSA plates for 48 hours at $35^{\circ}C$. The bacterial strains were isolated and amplified by polymerase chain reaction. Results: The most culturable bacteria were found in toilets ($624.0CFU/m^3$, GM: $417.3CFU/m^3$), followed by in the kitchen ($503.8CFU/m^3$, GM: $324.9CFU/m^3$). The dominant genera identified were: Staphylococcus sp.(19%), Micrococcus sp.(16%), and Bacillus sp.(11%) in the indoor air and Bacillus sp. (30%) in the outdoor air. Gram-positive bacteria comprised more than half of all colonies. Conclusion: In this study, culturable bacteria concentrations were higher than those reported in other spaces. Therefore, it is important to control relative humidity and remove moisture to prevent bacteria from multiplying. Additionally, the dominant species in indoor air were Staphylococcus sp. and Micrococcus sp. These are found on the human skin, mucous membranes, and hair, so human activity can affect bacterial distribution. Therefore, cleaning and controlling moisture are important for reducing indoor bacterial concentrations.

• Journal of Hydrogen and New Energy
• /
• v.24 no.3
• /
• pp.223-229
• /
• 2013

Polymer Electrolyte Membrane Fuel Cell (PEMFC) is a power generation system to convert chemical energy of fuels and oxidants to electricity directly by electrochemical reactions. As a catalyst support for PEMFCs, carbon black has been generally used due to its large surface area and high electrical conductivity. However, under certain circumstances (start up/shut down, fuel starvation, ice formation etc.), carbon supports are subjected to serve corrosion in the presence of water. Therefore, it would be desirable to switch carbon supports to corrosion-resistive support materials such as metal oxide. $TiO_2$ has been attractive as a support with its stability in fuel cell operation atmosphere, low cost, commercial availability, and the ease to control size and structure. However, low electrical conductivity of $TiO_2$ still inhibits its application to catalyst support for PEMFCs. In this paper, to explore feasibility of $TiO_2$ as a catalyst support for PEMFCs, $TiO_2$ nanofibers were synthesized by electrospinning and calcinated at 600, 700, 800 and $900^{\circ}C$. Effects of calcination temperature on crystal structure and electrical conductivity of electrospun $TiO_2$ nanofibers were examined. Electrical conductivity of $TiO_2$ nanofibers increased significantly with increasing calcination temperature from $600^{\circ}C$ to $700^{\circ}C$ and then increased gradually with increasing the calcination temperature from $700^{\circ}C$ to $900^{\circ}C$. It was revealed that the remarkable increase in electrical conductivity could be attributed to phase transition of $TiO_2$ nanofibers from anatase to rutile at the temperature range from $600^{\circ}C$ to $700^{\circ}C$.

• Journal of Korean Society of Forest Science
• /
• v.105 no.1
• /
• pp.78-85
• /
• 2016

This study was carried out to determine the effects of shading and leaf mold treatment on growth characteristics and photosynthesis responses of Peucedanum japonicum in forest farming. It is very valuable as a sort of health food, so that the demand for the vegetable has increased recently. The experiment can not only increase the yield but also contribute to the development of eco-friendly technology for high-quality P. japonicum. It was performed by shading treatments (full sunlight, 35%, 50% and 75% shading) and leaf mold treatments (control, pine tree and chestnut tree). Height, stem diameter, root collar diameter, number of stem and dry weight were the highest in chestnut-leaf mold under full sunlight. Leaf area, leaf length and leaf width were the highest in chestnut-leaf mold under 35% shading. Photosynthetic rate, conductance to $H_2O$, transpiration rate and water use efficiency were the highest in chestnut-leaf mold under full sunlight. Specially, photosynthetic rate was higher under chestnut-leaf mold in all shading treatment, and getting lower in the higher shading rate. As a result of surveying the whole experiment, it is concluded that P. japonicum grows nicely by maintaining 35% shading under chestnutleaf mold in forest farming. Thus, it is the most effective way to increase the yield for high-quality P. japonicum with eco-friendly technology.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.39 no.6
• /
• pp.820-825
• /
• 2010

The functional food components from various Basidiomycota were investigated to improve human intestinal microflora, especially associated with obesity. EtOH extract from Gyrophora esculenta fruit body and Coriolus versicolor judae mycelia showed antimicrobial activities on Eubacterium limosum, Clostridium perfrigens, Clostridium paraputrificum, Clostridium difficile and Clostridium ramosum, and on Bacteroides fragilis, respectively. Although the 80% EtOH extract from G. esculenta fruit body and hot-water extract from C. versicolor judae mycelia did not reduce weight of the rats in the high fat diet, these extracts showed stability at high temperatures and at wide pH ranges. In the rat group of feeding 80% EtOH extract from G. esculanta fruit body, Bifidobacterium spp. were increased and Clostridium spp. and Eubacterium spp. were decreased compared to the high fat feeding group. Also sensory evaluation was carried out for the development of prototype drink product. These results demonstrated the possibilities of C. versicolor judae and G. esculenta as a functional food components to control intestinal microbial flora.

• Journal of Korean Society of Forest Science
• /
• v.103 no.3
• /
• pp.383-391
• /
• 2014

Long-term changes in the hydrological characteristics of a small forest watershed were examined using a master baseflow recession curve and the measured rainfall-runoff data from the experimental forest watershed in the measured years 2003-2011. The results of the study showed that the recession coefficient of direct runoff was lower than that of baseflow. In small forested watershed, the direct flow was lower than that of large scale watershed, flow due to its shorter period of occurrence. And baseflow was similar to large scale watershed's. A regression equation $y=0.7528e^{-0.022x}$($R^2=0.8938$, range 0.3~0.8 mm) was obtained using the master baseflow recession curve for the study period and the recession coefficient was calculated as K = 0.978. Changes between master baseflow recession curve and runoff showed great association and relevance such as increasing runoff was associated with the gentle slope of master baseflow recession curve and decreasing runoff was associated with the slope of master baseflow recession curve contrary. In the later years of the study period, the slope of the master baseflow recession curve appreciably became more gentle due to increases in baseflow. This suggests that the forested experimental watershed exhibit improved structural functioning of normal flood control and reduced occurrence of water shortage problems.