• Hwankyungkyoyuk
• /
• v.23 no.4
• /
• pp.44-55
• /
• 2010

The purpose of this study is to develop an environmental report for children and to examine the learning effects of the environmental report on elementary school students. This study is carried out by the survey. The results of this study are as follows. First, the Environmental Report for children, which consists of 8 subjects related to the environmental policy in Korea. 1) Green Growth and Sustainable Policy, 2) Climate Change, 3) Water Supply and Sewage Policy, 4) Sustainable Watershed Management, 5) Conservation of Biodiversity, 6) Resource Recirculation, 7) Environmental Health for Children, and 8) Environmental Dictionary, was systematically developed. Second, the Environmental report developed was examined the effects to third and fourth grade elementary school students in Incheon and Daegu. By dividing elementary school students into two groups: A Control group and an Experimental group, the lessons were respectively executed. In conclusion, the Environmental Report leads to good effects when it is applied to both Environmental Education and the public relation of the Environmental Policy in Korea. Finally, it would be expected to be efficient in learning Sustainable Development and the Environmental Policy.

• Journal of Adhesion and Interface
• /
• v.17 no.2
• /
• pp.62-66
• /
• 2016

The curing processes of waterborne adhesives are in general undergone by using hot-air dryer. The hot-air dryer curing the adhesives with heat has a disadvantage of requiring high temperature over $100^{\circ}C$ as well as curing time as long as 20 min. When it comes to the heat control, high temperature open disturbs the adhesion of substrates by extremely lowering the viscosity of the adhesives. Furthermore, the humidity resulting from the drying process makes the curing condition irregularly. In this report, dehumidifying membrane dryer was used in order to keep the curing process same by removing humidity caused by the evaporation of water during the drying process, and to shorten the curing time. Here, we compared the peel strength of attached substrates in the dehumidifying membrane dryer to find out appropriate curing condition and confirm the effects of the dehumidifying membrane.

• Elastomers and Composites
• /
• v.47 no.4
• /
• pp.292-296
• /
• 2012

An electric double-layer capacitor (ELDC) of activated carbon electrode is prepared using a proton-conducting hydrogel polymer electrolyte, which is composed of poly(vinyl alcohol), silicotungstic acid, $H_3PO_4$, and deionized water. A solid film by evaporating the hydrogel polymer electrolyte is also prepared for comparison. The hydrogel polymer electrolyte also acts as a separator with the thickness of about $80{\mu}m$ and the room-temperature ionic conductivity of $10^{-2}S\;cm^{-1}$. The EDLC containing the symmetric electrodes of activated carbon shows the specific capacitance of $58F\;g^{-1}$ at $100mV\;s^{-1}$ with a good cycle life, implying that the hydrogel polymer electrolyte is very promising for use in EDLCs.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.43 no.4
• /
• pp.329-335
• /
• 2017

We have studied on the keratinocytes differentiation and skin barrier function using Adenophorae radix (A. radix) root extract, which was known to contain triterpenoid, saponin and starch. A. radix root extracts showed the $PPAR{\alpha}$ expression level of Wy-14,643 $0.5-1.0{\mu}M$ in CV-1 cells. The cornified envelop formation (CE) of human keratinocyte cell line (HaCaT) and normal human keratinocyte (NHK) showed a statistically significant increased compared to the control. When HaCaT cells were treated with A. radix root extract, transglutaminase (TGase-1) was significantly increased. As a result of clinical study of the simple cosmetic formulation containing A. radix root extract for about 2 weeks, TEWL values were significantly decreased and water contents were increased. The ceramides, which were obtained from the inner forearm, were also significantly increased statistically. We suggest that the A. radix root extract can be used as a preventive and therapeutic agent for skin diseases such as dry skin and atopy.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.19 no.1
• /
• pp.19-27
• /
• 2007

Analytical investigation on the performance of a two stage twin rotary compressor for $CO_2$ heat pump water heater system has been carried out. A computer simulation program was made based on analytical models for gas compression in control volumes, leakages among neighboring volumes, and dynamics of moving elements of the compressor. Calculated cooling capacity, compressor input, and COP were well compared to those of experiments over the compressor speeds tested. For the operating condition of suction pressure of 3 MPa, and discharge pressure of 9 MPa, and compressor inlet temperature of $35^{\circ}C$, the compressor efficiency was calculated to be 80.2%: volumetric, adiabatic, and mechanical efficiencies were 88.3%, 93.2%, and 92.7%, respectively. For the present compressor model, volumetric and adiabatic efficiencies of the second stage cylinder were lower by about $6{\sim}7%$ than those of the first stage mainly due to the smaller discharge port at the second stage. Parametric study on the discharge port size showed that the compressor performance could be improved by 3.5% just by increasing the discharge port diameter by 20%.

• Food Science and Preservation
• /
• v.10 no.2
• /
• pp.187-191
• /
• 2003

The effects of mushroom powder fer noodle pasty and noodle were investigated The peak viscosity of control was higher than that of added mushroom powder. The water absorption in farinograph slightly increased with the addition of mushroom powder. Decrease of lightness(L) and increase of redness(a) and yellowness(b) were shown with the increase of mushroom powder in wheat flour mushroom powder composite as well as noodles paste and wet noodles. The weight and volume of cooked noodles were decreased, but the turbidity of soup were not different with the addition of mushroom powder. The cohesiveness, springiness and chewiness of cooked noodles were increased with the addition of mushroom powder. The results of sensory evaluation cooked noodles showed that the wet noodles with high quality could be produced by 3∼5% addition of Pholiota adiposa powder.

• Archives of Pharmacal Research
• /
• v.18 no.3
• /
• pp.183-188
• /
• 1995

Polymeric reinforcement and coatings of alginate beads were carried out to control the release rate of drug from alginate beads. A poorly water-soluble ibuprofen (IPF) was selected as a model drug. A commercially available $Eudragit^{\circledR}$ RS100 was also used as a polymer. Effects of polymeric contents, the presence of plasticizers and amount of drug loading on the release rate of drug were investigated. The release rate of drug from alginate beads in the simulated gastric fluid did not occur within 2 h but released immediately when dissolution media were switched to the simulated intestinal fluid. No significant difference of release rate from polymer-reinforced alginate bead without plasticizers was observed when compared to plain (simple) beads. However, the release rate of drug from polymer-reinforced alginate beads was further sustained and retarded when aluminium tristearate (AT) as a plasticizer was added to polymer. However, polyethylene glycol 400 (PEG400) did not change the release rate of drug from alginate beads although PEG400 was used to improve dispersion of polymer and sodium alginate, and plasticize $Eudragit^{\circledR}$ RS100 polymer. The presence of plasticizer was crucial to reinforce alginate gel matrices using a polymer. As the amount of drug loading increased, the release rate of drug increased as a result of decreasing effects of polymer contents in matrices. The significantly sustained release of drug from polymer-coated alginate beads occurred as the amount of polymer increased because the thickness of coated membrane increased so that cracks and pores of the outer surface of alginate beads could be reduced. The sustained and retarded action of polymer-reinforced and coated beads may result from the disturbance of swelling and erosion (disintegration) of alginate beads. From these findings, polymeric-reinforcement and coatings of alginate gel beads can provide an advanced delivery system by retarding the release rate of various drugs.

• Korean Journal of Food Science and Technology
• /
• v.37 no.4
• /
• pp.603-610
• /
• 2005

Quality characteristics of white breads added with different levels of jujube extracts were investigated. Addition of jujube extract significantly decreased L-value, and increased a and b-values. Addition levels up to 70% did not have significant effects on the texture of breads. Significant increases in the hardness, chewiness, and gumminess were observed in 100% jujube-added group. Additive levels over 50% jujube showed good sensory scores compared with control bread in color, flavor, taste, and general palatability. Textural property increased with increasing amount of jujube extract. Results showed substitution of 50-70% jujube extract for water improved bread quality.

• Korean Journal of Food Science and Technology
• /
• v.24 no.2
• /
• pp.142-148
• /
• 1992

Certain parts of 95 species of edible and medical plants were extracted with water and 75% of ethyl alcohol. After addition of those extracts to palm oil, lard and soybean oil at different level, their antioxidative activities were compared by Rancimat test. Six species among them seemed to have rather strong antioxidative activity and high extracting yields(i.e. Taraxacum platycarpum, Plantago asiatica, Rhus javanica L., Lycopus lucidus, Astragalus membranaceus, Taraxacum platycarpumH). Among them, the Rhus javanica L. ethanol extract retarded greatly the induction period of palm oil and lard. When 600 ppm of Rhus javanica L. extract were added to palm oil and lard, AI(antioxidant index was expressed as induction period of oil containing various plant extracts/induction period of control oil) of each was 1.35 and 3.03 respectively. This result indicated that the Rhus javanica L. extract was more effective on lard than the other oils.

• Korean Journal of Food Science and Technology
• /
• v.21 no.5
• /
• pp.655-661
• /
• 1989

Optimal drying conditions consisting of air temperature and relative humidity were searched by the simulation-optimization technique for minimizing quality changes in red pepper drying. Optimized drying conditions were analysed in the viewpoint of quality change kinetics and effects of control variables on the state variables. Optimal drying conditions were nearly same in both cases for carotenoid maximization and browning minimization. In two staged optimized drying, relative humidity took a lower search limit of about 10%, and air temperature in the first stage was near the lower limit of $50^{\circ}C$ and in second stage increased to a higher temperature varying with total drying time and stage changing time. Response surface analysis of time invariable drying confirmed the location of the optimal point lying on the vertex of lower limit humidity and a lowest drying temperature which ensures to attain target moisture of 0.2g water/g dry solid. Two stage drying can attain the higher objective function of quality by 3-5% than time invariable drying for shorter total drying times.