• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.48 no.5
• /
• pp.719-724
• /
• 2015

In this study aiming at the cultured olive flounders in Jeju island of Korea, has performed a total of 216 cases of pathogen tests for the olive flounders which seemingly had the symptom of emaciation in 24 farms on the suspicion of its occurrence from June 2010 to December 2013 and intended to get the basic information about the pathogen. According to the survey results of the emaciation infection status of 24 farms in Jeju over the period of this survey, it was confirmed that 18 (75%) of 24 farms in Jeju are positive in the emaciation infection. Among them, as for the rate of infection per year, it was observed that they are 38% in 2010, 48% in 2011, 50% in 2012 and 60% in 2013, and over the period of this survey the infection rate in accordance with the temperature of water has observed a variety of incidence rates from the summer to the winter season. In addition, according to the results of emaciation infection status for each size, the equivalent showed a detection rate, 54% in 11-20 cm, 43.9% in 21-30 cm and 25.4% in over 31 cm. This result accounts for an important portion among the diseases of farmed olive flounders in Jeju, is considered to be one of the diseases which cause troubles in the farms for olive flounders on land and it is thought that it can be utilized as basic data in order to estimate emaciation which may occur in the similar size of the cultured olive flounders in Jeju island.

• Journal of Microbiology and Biotechnology
• /
• v.20 no.2
• /
• pp.356-362
• /
• 2010

Ceramide is important not only for the maintenance of the barrier function of the skin but also for the water-binding capacity of the stratum corneum. Although the exact role of ceramide in the human skin is not fully understood, ceramide has become a widely used ingredient in cosmetic and pharmaceutical industries. Compared with other microorganisms, yeast is more suitable for the production of ceramide because yeast grows fast and is non-toxic. However, production of ceramide from yeast has not been widely studied and most work in this area has been carried out using Saccharomyces cerevisiae. Regulating the genes that are involved in sphingolipid synthesis is necessary to increase ceramide production. In this study, we investigated the effect of the genes involved in the synthesis of ceramide, lcb1, lcb2, tsc10, lac1, lag1, and sur2, on ceramide production levels. The genes were cloned into pYES2 high copy number vectors. S. cerevisiae was cultivated on YPDG medium at $30^{\circ}C$. Ceramide was purified from the cell extracts by solvent extraction and the ceramide content was analyzed by HPLC using ELSD. The maximum production of ceramide (9.8 mg ceramide/g cell) was obtained when the tsc10 gene was amplified by the pYES2 vector. Real-time RT-PCR analysis showed that the increase in ceramide content was proportional to the increase in the tsc10 gene expression level, which was 4.56 times higher than that of the control strain.

• Journal of Nutrition and Health
• /
• v.36 no.5
• /
• pp.437-445
• /
• 2003

As obesity is known to be related to hyperlipidemia, insulin and leptin resistance, and other chronic diseases, much recent research has focused on functional food materials and their anti-obesity activity. This study was performed to study the effects of Artemisia Iwayomogi oligosaccharide AIPI on the anti-obesity function in normal rats and diet-induced obese (DIO) rats. F344 male rats were divided into four groups: Normal-control (CONT), normal-AIPI, DIO-CONT and DIO-AIPI. The groups were provided with water (in the CONT groups) or another drink for 4 weeks. The final body weights of rats in the DIO-AIPI group were lower than those in the CONT group. Abdominal adipose tissue weight per kg of body weight in the DIO-AIPI group was significantly lower than that in the DIO-CONT group. Also, the final levels of serum-triglyceride, serum-total cholesterol and serum-low density lipoprotein cholesterol in the DIO-AIPI group were lower than those in the DIO-CONT group. Moreover, the serum-high density lipoprotein cholesterol level in the normal-AIPI group was significantly higher than that in the normal-CONT group. Finally, the serum-leptin concentration was significantly lower in the DIO-AIPI group. Total lipid, triglyceride, and total cholesterol contents in the feces of the DIO-AIPI group were as high as 142％, 199％, and 165% of the respective values of the DIO-CONT GROUP. These results indicate that orally administered Artemisia Iwayomogi oligosaccharide not only has hypotriglycemic and hypocholesterolemic effects, but also has the effect of reducing the body weight and the abdominal adipose tissue weights obese rats. Therefore, we expect that Artemisia Iwayomogi oligosaccharide AIPI may have an anti-obesity function in F344 diet-induced obese rats. (Korean J Nutrition 36(5): 437∼445, 2003)

• Journal of Nutrition and Health
• /
• v.39 no.4
• /
• pp.347-356
• /
• 2006

It is reported that a fermented soybean food, Doenjang, has srong antimutagenic and cytotoxic effect on cancer cells. This study investigated the effect of Chungkookjang, another traditional popular Korean soybean fermented food, on growth of cancer cells: HL-60, SNU-638 and MCF-7, and also its in vivo antitumorigenic effect in DMBA-induced mammary tumor rat model. For the in vitro study, Chungkookjang and steamed soybeans were extracted with ethanol and sequentially fractioned with 5 kinds of solvents differing in grades of polarity such as hexane, dichloromethane, ethylacetate, butanol and water. Almost all Chungkookjang extracts significantly inhibited the growth of HL-60 (human leukemic cancer cell), SNU-638 (human gastric cancer cell) and MCF-7 (human breast cancer cell) when compared to steamed soybean extracts. Butanol fraction of Chungkookjang extract especially showed a remarkable inhibitory effect in all the three kinds of cancer cells. To induce a mammary gland tumor, DMBA (50 mg/BW) was administered to 50 day-old female rats and followed by Chungkookjang or steamed soybean supplemented diets. Freezedried Chungkookjang powder (20% of diet in wet weight) was added to AIN-93G based diet for the Chungkookjang group of rats. Likewise, steamed soybean powder containing equal protein content to that of Chungkookjang powder was supplemented to soybean group of rats. At 13 weeks later, the mammary tumor incidence, average tumor number and tumor weight a rat were lower in Chungkookjang group compared to the control or soybean group. In conclusion, Chungkookjang showed a strong inhibitory effect on cancer cell growth in vitro, as well as a more preventive effect against chemically induced mammary tumorigenesis in vivo, while steamed soybeans did not. Therefore, these results suggest that Chungkookjang acquire its anticancer activity through the fermentation process.

• The Korean Journal of Pesticide Science
• /
• v.15 no.2
• /
• pp.104-113
• /
• 2011

We investigated the systemic effects of leaf folder (Cnaphalocrocis medinalis) resistant rice (transgenic rice, Nakdongbyeb) in Sprague-Dawley rats for 13 weeks. Leaf folder resistant rice was added to the diet at percentage levels of 0, 5 and 20 percentage/feeder and was administered for 13 weeks. The results did not show any changes in food and water intake. There were also no biologically significant changes in both body and organ weights, hematological and blood biochemical parameters, autopsy and histopathology between the treatment and control groups. Based on these results, no observed adverse effect level (NOAEL) of transgenic rice was considered to be more than 10,000 mg/kg b.w. under the conditions of the present study.

• The Journal of Korean Society for Radiation Therapy
• /
• v.1 no.1
• /
• pp.63-69
• /
• 1985

High energy electron beams took effect for tumor radio-therapy, however, had a lot of problems in clinical application because of various conversion factors and complication of physical reactions. Therefore, we had experimentally studied the important properties of high energy electron beams from the linear accelerator, LMR-13, installed in Yonsei Cancer Center. The results of experimental studies on the problems in the 8, 10, 12 Mev electron beam therapy were reported as following. 1. On the measurements of the outputs and absorbed does, the ionization type dosimeters that had calibrated by $^{90}Sr$ standard source were suitable as under $3\%$ errors for high energy electrons to measure, but measuring doses in small field sizes and the regions of rapid fall off dose with ionization chambers were difficult. 2. The electron energy were measured precisely with energy spectrometer consisted of magnet analyzer and tele-control detector and the practical electron energy was calculated under $5\%$ errors by maximum range of high energy electron beam in the water. 3. The correcting factors of perturbated dose distributions owing to radiation field, energy and material of the treatment cone were checked and described systematically and variation of dose distributions due to inhomogeneous tissues and sloping skin surfaces were completely compensated. 4. The electron beams, using the scatters; i.e., gold, tin, copper, lead, aluminium foils, were adequately diffused and minimizing the bremsstrahlung X-ray induced by the electron energy, irradiation field size and material of scatterers, respectively. 5. Inproving of the dose distribution from the methods of pendulum, slit, grid and focusing irradiations, the therapeutic capacity with limited electron energy could be extended.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.3
• /
• pp.7-13
• /
• 2017

A comfortable indoor environment is important considering that many hours are spent in residential or office space. A humidifier is used to control the indoor humidity. In particular, an element type humidifier has the advantage of a simple structure and low energy consumption. Two types of humidifiers - stationary or rotor - are commonly used for residential purposes. In this study, performance optimization was conducted for a rotor-type humidifying element used in a residential humidifier. The optimization included the rotation speed, water submersion depth, etc. The test range consisted of an open area to the air from 57 to 90%, rotation speed from 0.2 to 2.0 rpm, frontal air velocity from 0.5 to 2.5 m/s. The results showed that the optimal open area to air was 70%. On the other hand, the effects of the rotation speed on the moisture transfer rate was negligible. On the other hand, the pressure drop increased with increasing rotation speed. As the frontal air velocity increased, both the moisture transfer rate and pressure drop increased. The humidification capacity of the present element was 0.08 ~ 0.31 kg/hr. A comparison of the data with the theoretical results was made.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.4
• /
• pp.17-24
• /
• 2018

The HEC-HMS model was applied to identify the rainfall-runoff processes for the Anseongchun basin, where the lower part of the stream has been damaged severely by tropical storms in the past. Modeling processes include incorporating with the SCS-CN model for loss, Clark's UH model for transformation, exponential recession model for baseflow, and Muskingum model for channel routing. The parameters were calibrated through an optimization technique using a trial and error method. Sensitivity analysis after calibration was performed to understand the effects of parameters, such as the time of concentration, storage coefficient, and base flow related constants. Two storm water events were simulated by the model and compared with the corresponding observations. Good accuracy in predicting the runoff volume, peak flow, and the time to peak flow was achieved using the selected methods. The results of this study can be used as a useful tool for decision makers to determine a master plan for regional flood control management.

• YAKHAK HOEJI
• /
• v.52 no.1
• /
• pp.12-19
• /
• 2008

The organic acids (formic acid, acetic acid and propionic acid), phenol and benzopyrene in wood vinegar were determine by HPLC. An $Atlantis^{TM}dC_{18}$ column with a acetonitrile: 0.1% phosphoric acid (5: 95, organic acids), acetonitrile: water (10 : 90, phenol), 100% acetonitrile (benzopyrene) as a mobile phase was used. Retention time of acetic acid, formic acid, propionic acid, phenol and benzopyrene was 4.77, 3.73, 9.08, 30.97 and 6.10 min, respectively. The calibration curves of organic acids, phenol, benzopyrene were linear over the concentration range of $30{\sim}500,\;60{\sim}1000$, and $3{\sim}50\;{\mu}g/ml$ with correlation coefficient of above 0.999. The limit of detection (LOD) and limit of quantitation (LOQ) of acetic acid, formic acid, propionic acid, phenol, and benzopyrene was 1.71 and 5.19, 1.11 and 3.35, 4.87 and 14.74, 6.45 and 19.55, 0.08 and $0.24\;{\mu}g/ml$, respectively. The coefficients of variation for intra- and inter-day assay were $0.21{\sim}4.14$ and $0.07{\sim}1.19%$, respectively and the precision was $95{\sim}115%$. From this study, we suggest that HPLC is suitable method for the determination of organics in wood vinegar and could be applied to quality control of wood vinegar.

• Journal of Adhesion and Interface
• /
• v.21 no.2
• /
• pp.51-57
• /
• 2020

Recently, there has been growing interest in the study of removal of harmful and hazardous pollutants emitted by industrial activities. In this study, we have developed porous activated carbon fibers prepared by a water vapor activation method and analyzed the adsorptions of the harmful gases with electrochemical responses of activated carbon fibers. To control the uniformity of pore structures, active reaction areas, and active sites, the reaction conditions of activation temperatures were varied from 750 to 850 ℃ with the predetermined reaction time intervals (30 to 240 min). The SO₂ and NO gas adsorptions of activated carbon fibers prepared by various reaction conditions were analyzed and monitored by electrochemical sensor responses. In particular, the activated carbon fibers prepared at the reaction temperature of 850 ℃ and time of 45 min showed the highest specific surface area (1,041.9 ㎡/g) and pore characteristics (0.42 ㎤/g), and excellent adsorption capabilities of SO₂ (1.061 mg/g) and NO (1.210 mg/g) gases, respectively.