• Analytical Science and Technology
• /
• v.33 no.5
• /
• pp.224-231
• /
• 2020

With the improvement in the standard of living and extension of life expectancy, the incidence of prostate diseases has increased yearly, thus becoming a serious disease affecting the health of men. The extract mixture of Cornus officinalis and Stauntonia hexaphylla leaves is a developed functional food formula to improve prostate health. This study developed a simultaneous analytical method of bioactive compounds for quantifying the mixture of Cornus officinalis and S. hexaphylla leaves using high-pressure liquid chromatography-ultraviolet (HPLC-UV). HPLC analytical condition was performed on a Hector C₁₈ column with a mobile phase of 0.1 % formic acid in water (A) and 0.1 % formic acid in acetonitrile (B) under the following gradient conditions: 0-50 min, 12 %-40 % (B) at a flow rate of 1.0 mL/min. Meanwhile, this method was validated properly and successfully used to quantify the bioactive components of morroniside and hederacoside D in 20 sample batches and assess the quality of different ages and seasons of S. hexaphylla leaves. The result showed that the content of morroniside in the extract mixture of Cornus officinalis and S. hexaphylla leaves ranged from 1.38-1.62 mg/g, and the hederacoside D ranged from 28.42-32.02 mg/g, suggesting that this novel analytical method will be suitable for the quality control of the extract mixture to improve benign prostatic hyperplasia.

• Journal of the Korean Applied Science and Technology
• /
• v.29 no.3
• /
• pp.531-542
• /
• 2012

The thesis covers the trend of research on bio-based polyurethane which is made from polyols derived mainly from plant oils and isocyanates. Castor oil is a triglyceride of ricinoleic acid containing hydroxyl group. Hydroxylation is done on the unsaturated bonds of the oils by the reactions of epoxidation/ring opening, hydroformylation/hydrogenation, ozonolysis/hydrogenation, and thiol-ene reaction. Polyols from hyperbranch, primary alcohol, polysaccharide have been studied to control the reactivity of the polyol and morphology of the microdomains. Besides, researches cover biodegradable polylactic acid polyol for medical use, fatty acid dimer polyol for the prevention of hydrolysis, and polyol with ionic group for water-borne polyurethane. Bio-based polyurethanes are being used in flexible and rigid foams, coatings, sealants, and elastomers.

• Nutrition Research and Practice
• /
• v.2 no.3
• /
• pp.143-151
• /
• 2008

Many herbs have been used as therapeutics in Korean traditional medicine. In view of their clinical indications, anti-oxidant activity may contribute to their pharmacological effects. However, anti-oxidant information on these plants has not been available. In this study, seventy herbs which have been used in Korean traditional medicine were selected and screened for anti-oxidant activity using their water extracts. The anti-oxidant activity was assessed by their ability to inhibit three oxidation reactions; luminol/Fenton reagent, 2, 7-dichlorodihydrofluorescein(DCHF)/Fenton reagent and DCHF/peroxynitrite. In each assay, 70 herbs were divided into two groups; anti-oxidant group which inhibited the respective oxidation reaction and was majority(about 60 herbs), and pro-oxidant group which enhanced the oxidation reaction but was minority(more or less 10 herbs). When the herbs were listed in the order of their anti-oxidant strength, the orders obtained from each assay were found to be quite similar. The upper top rankers(more or less 10 herbs) in each assay showed strong activity compared to the others. The uppermost rankers in each assay were Rubus coreanus Miquel/Rubus schizostylus(覆盆子), Schisandra chinensis Baillon/Schizandra chinensis(五味子) and Terminalia chebula Retziusl Terminalia chebula(訶子). Of the pro-oxidant herbs, about 4-5 herbs were strongly pro-oxidant, which enhanced the control oxidation reactions to 150-300%. But the meaning of this observation is not known since few of them in one assay were also anti-oxidant in other assays. The results obtained in the present study may serve as information for understanding pharmacological effects of these herbs and developing new drugs from them.

• Nutrition Research and Practice
• /
• v.2 no.3
• /
• pp.158-164
• /
• 2008

This study investigated that the antioxidative effect of freeze-dried cranberry powder against protein and lipid oxidation and ameliorative effect of serum lipid profile in rat fed atherogenic diet. Six weeks old male Sprague-Dawley rats were divided into the following four groups: normal diet group with 5% com oil(control), atherogenic diet group with 5% com oil, 10% lard, 1% cholesterol, and 0.5% sodium cholate(HFC), atherogenic plus 2% cranberry powder diet group(HFC+C2), and atherogenic plus 5% cranberry powder diet group(HFC+C5), and respective diet and water were fed daily for 6 weeks. After the experimental period, the serum lipid profile, such as total cholesterol, HDL-cholesterol, LDL-cholesterol, and triglyceride, ferric reducing ability of plasma(FRAP), plasma phenolics content, superoxide dismutase(SOD) activity, serum protein carbonyl and thiobarbituric acid reactive substances(TBARS) levels were examined. Total phenolic compound and total flavonoid levels in freeze-dried cranberry powder were 9.94 mg/g and 8.12 mg/g, respectively. Serum total cholesterol and LDL-cholesterol levels were not significantly different for cranberry powder treatment, but serum HDL-cholesterol level was significantly increased in HFC+C5 group compared with HFC group. Plasma FRAP value tended to be increased by cranberry powder treatment though there was no significant difference. Plasma total phenol concentrations and SOD activities were not significantly different among all groups. Serum protein carbonyl and TBARS levels were significantly decreased in HFC+C5 group compared with HFC group. Overall results suggested that freeze-dried cranberry powder might have the serum lipid improving effect, as well as anti oxidative effect demonstrated by its protective effect against protein and lipid oxidation.

• The Korean Journal of Malacology
• /
• v.32 no.2
• /
• pp.83-93
• /
• 2016

For the continuous stable production of oyster, estimation of food availability (F) was carried out in Goseong Bay, south of coast Korea. Primary productivity ranged from 0.07 to $0.44gC/m^2/day$ (average $0.25gC/m^2/day$), lowest in July and highest in January. The distribution of primary productivity at Goseong Bay showed the pattern of "high in the south and low in the north." Food availability (F) was $F{\leq}0$, indicating insufficient food supply, from August to November and F > 0 from January to April. Continuous insufficient food supply was observed at 18 oyster farms in the southern part of the bay and 4 in its northern part. Mortality at the oyster farms was 56% on the average, and around 58% of death occurred during November when food supply was insufficient. The optimal population of cultured oyster per unit flow area was calculated to be $110-115indiv./m^2$ (198-201 indiv./string). When the sea area was divided into 3 regions (A, B, C) according to carrying capacity, the carrying capacity of (A) regions was $52-53indiv./m^2$ (93-95 indiv./string), (B) regions was $142-144indiv./m^2$ (255-259 indiv./string), and (C) regions was $198-202indiv./m^2$ (356-363 indiv./string). In particular, (A) regions showed extremely low productivity. For continuous stable oyster farming at Goseong Bay, it is necessary to control point and non-point source pollution through continuous environmental monitoring and to adjust harvest according to the base carrying capacity during the season of high water temperature.

• Advances in concrete construction
• /
• v.2 no.2
• /
• pp.109-123
• /
• 2014

This paper presents chloride induced corrosion durability of reinforcing steel in geopolymer concretes containing different contents of sodium silicate ($Na_2SiO_3$) and molarities of NaOH solutions. Seven series of mixes are considered in this study. The first series is ordinary Portland cement (OPC) concrete and is considered as the control mix. The rest six series are geopolymer concretes containing 14 and 16 molar NaOH and $Na_2SiO_3$ to NaOH ratios of 2.5, 3.0 and 3.5. In each series three lollypop specimens of 100 mm in diameter and 200 mm in length, each having one 12 mm diameter steel bar are considered for chloride induced corrosion study. The specimens are subjected to cyclic wetting and drying regime for two months. In wet cycle the specimens are immersed in water containing 3.5% (by wt.) NaCl salt for 4 days, while in dry cycle the specimens are placed in open air for three days. The corrosion activity is monitored by measuring the copper/copper sulphate ($Cu/CuSO_4$) half-cell potential according to ASTM C-876. The chloride penetration depth and sorptivity of all seven concretes are also measured. Results show that the geopolymer concretes exhibited better corrosion resistance than OPC concrete. The higher the amount of $Na_2SiO_3$ and higher the concentration of NaOH solutions the better the corrosion resistance of geopolymer concrete is. Similar behaviour is also observed in sorptivity and chloride penetration depth measurements. Generally, the geopolymer concretes exhibited lower sorptivity and chloride penetration depth than that of OPC concrete. Correlation between the sorptivity and the chloride penetration of geopolymer concretes is established. Correlations are also established between 28 days compressive strength and sorptivity and between 28 days compressive strength and chloride penetration of geopolymer concretes.

• Advances in Energy Research
• /
• v.5 no.2
• /
• pp.91-105
• /
• 2017

Thermal hydraulic (TH) analysis of nuclear power reactors is utmost important. In this way, the numerical codes that preparing TH data in reactor core are essential. In this paper, a subchannel analysis of a Russian pressurized water reactor (WWER1000) core with enhanced numerical code is carried out. For this, in fluid domain, the mass, axial and lateral momentum and energy conservation equations for desired control volume are solved, numerically. In the solid domain, the cylindrical heat transfer equation for calculation of radial temperature profile in fuel, gap and clad with finite difference and finite element solvers are considered. The dependence of material properties to fuel burnup with Calza-Bini fuel-gap model is implemented. This model is coupled with Isotope Generation and Depletion Code (ORIGEN2.1). The possibility of central hole consideration in fuel pellet is another advantage of this work. In addition, subchannel to subchannel and subchannel to rod connection data in hexagonal fuel assembly geometry could be prepared, automatically. For a demonstration of code capability, the steady state TH analysis of a the WWER1000 core is compromised with Thermal-hydraulic analysis code (COBRA-EN). By thermal hydraulic parameters averaging Fuel Assembly-to-Fuel Assembly method, the one sixth (symmetry) of the Boushehr Nuclear Power Plant (BNPP) core with regular subchannels are modeled. Comparison between the results of the work and COBRA-EN demonstrates some advantages of the presented code. Using the code the thermal modeling of the fuel rods with considering the fission gas generation would be possible. In addition, this code is compatible with neutronic codes for coupling. This method is faster and more accurate for symmetrical simulation of the core with acceptable results.

• Asian-Australasian Journal of Animal Sciences
• /
• v.18 no.3
• /
• pp.364-369
• /
• 2005

The present study was conducted to evaluate effect of Sauropus androgynus extract (SAE) on egg production and lipid metabolism in layer chickens. Forty-eight layers aged 42 weeks (strain RIR) were distributed to 6 treatment groups as follows. One group was fed diet without SAE as the control ($P_0$), and other five groups were fed diet plus hot water-extracted SAE at level of 9 g/kg diet ($W_9$), diet plus ethanol extracted SAE at level of 0.9 g/kg diet ($E_{0.9}$), diet plus ethanol extracted SAE at level of 1.8 g/kg ($E_{1.8}$), diet plus methanol extracted SAE at level of 0.9 g/kg ($M_{0.9}$), and diet plus methanol extracted SAE at level of 1.8 g/kg ($M_{1.8}$). It was shown that SAE inclusion significantly increased egg production (p<0.05). Methanol-extracted SAE groups had lower egg production than ethanol-extracted SAE group (p<0.05). SAE supplemented groups had better feed conversion efficiency than the unsupplemented group (p<0.05). It was shown that ethanol extracted SAE resulted in the lowest feed conversion efficiency among the SAE supplemented groups (p<0.05). SAE supplementation significantly reduced abdominal fat, gizzard surrounded fat, liver fat (p<0.05), serum triglyceride, total cholesterol, VLDL+LDL-c (p<0.01), atherogenic index (p<0.05), egg cholesterol and triglyceride (p<0.05), but it had no effect on mesenteric fat, sartorial fat and fatty liver score. In conclusion, SAE supplementation could increase egg production but reduced egg cholesterol.

• Asian-Australasian Journal of Animal Sciences
• /
• v.21 no.2
• /
• pp.299-306
• /
• 2008

This study was designed to develop microencapsulated Korean mistletoe extract, to determine the stability in vitro and to examine its application in milk. Coating materials used were polyglycerol monostearate (PGMS) and medium-chain triacylglyderol (MCT). The highest efficiency of microencapsulation was 78.3% with 15:1:40 (w/w/v) as PGMS : mistletoe extract : distilled water and 66.1% with 15:1 (w/w) as MCT : mistletoe extract. The size of microcapsule was about 30.0 and $19.5{\mu}m$ with PGMS and MCT, respectively. When microcapsules of mistletoe extract were incubated in simulated gastric fluid at pH 2 for 60 min, 14.8 and 17.2% of lectin was released from capsules which were coated with PGMS and MCT, respectively. Comparatively, 83.2 and 87.3% of lectin was released in simulated intestinal fluid (pH 8) after 60 min incubation of capsules coated with PGMS and MCT, respectively. The subsequent study determined the changes of physicochemical and sensory characteristics of milk with fortification of the mistletoe extract microcapsules during 12 day storage. TBA value was significantly lower in microcapsule-added groups than in the uncapsulated mistletoe extract-added group during the storage. When 100 ppm microencapsulated mistletoe extract was added, the L-, a- and b- values and viscosity were not significantly different from those of the control. In addition, the release of lectin from mistletoe extract over 12 days was 8.3 and 9.5 mg/100 ml in milk containing microcapsules made by PGMS and MCT, respectively. All sensory attributes showed a significant difference in uncapsulated mistletoe extract-added milk compared with other groups. The present study indicated that microcapsules of Korean mistletoe extract could be applied to milk and microcapsules coated with PGMS were effectively released in a simulated intestinal environment.

• Asian-Australasian Journal of Animal Sciences
• /
• v.33 no.2
• /
• pp.254-263
• /
• 2020

Objective: The objective of this study was to investigate the effects of wilting and additives on the fermentation quality, structural and non-structural carbohydrate composition of mulberry silages. Methods: The selected lactic acid bacteria strains Lactobacillus plantarum 'LC279063' (L1), commercial inoculant Gaofuji (GF), and Trichoderma viride cellulase (CE) were used as additives for silage preparation. Silage treatments were designed as control (CK), L1, GF, or CE under three wilting rates, that is wilting for 0, 2, or 4 hours (h). After ensiling for 30 days, the silages were analyzed for the chemical and fermentation characteristics. Results: The results showed that wilting had superior effects on increasing the non-structural carbohydrate concentration and degrading the structural carbohydrate. After ensiling for 30 days, L1 generally had a higher fermentation quality than other treatments, indicated by the lower pH value, acetic acid, propionic acid and ammonia nitrogen (NH₃-N) content, and the higher lactic acid, water soluble carbohydrate, glucose, galactose, sucrose, and cellobiose concentration (p<0.05) at any wilting rate. Wilting could increase the ratio of lactic acid/acetic acid and decrease the content of NH₃-N. Conclusion: The results confirmed that wilting degraded the structural carbohydrate and increased the non-structural carbohydrate; and L1 exhibited better properties in improving fermentation quality and maintaining a high non-structural carbohydrates composition compared with the other treatments.