• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2002년도 가을 학술발표회 논문집
• /
• pp.223-226
• /
• 2002

This study is performed to investigate the influence of aggregate factor on the estimation of water content in fresh concrete. According to the results, water content is estimated higher in the case of basalt and granite aggregate than in the case of limestone because absorption water ratio of basalt and granite is large. As the replacement ratio of recycled aggregate increases, water content is estimated higher. But, after correcting absorption water ratio of aggregate, estimated water content is similar to mixture water content. Therefore, it is important to know the absorption water ratio of aggregates accurately, to estimate water content.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 춘계학술발표회 논문집(I)
• /
• pp.606-609
• /
• 2006

In this study, it was selected that in order to make an investigation into the status of the unit water content control of the ready-mixed concrete plants in the country, Capacitance Measurement Method out of various methods which are able to gauge the amount of unit water content in fresh concrete. Then, it were estimated that the quantity of unit water in fresh concrete and the technical standard of every mixture design of the six ready-mixed concrete plants chosen at random in the country. Finally, based on this study, it was proposed as fundamental data to utilize measurement techniques of the quantity of unit water for the quality control of the ready-mixed concrete in construction field.

• 국제학술발표논문집
• /
• The 3th International Conference on Construction Engineering and Project Management
• /
• pp.754-757
• /
• 2009

The current concrete maturity method implemented with temperature sensors requires an extensive wiring, which is not often acceptable on construction site due to harsh working environment. Radio Frequency Identification (RFID) technology appears to provide a solution for the wiring issue because of its ability of sending data wirelessly. An RFID tag integrated with a temperature sensor and placed within fresh concrete may be able to read temperatures of concrete and transmit them to an RFID reader wirelessly in real-time. However the previous research illustrated that the RFID signal gets dispersed in liquid medium. One may speculate then whether RFID signals travel through fresh concrete with high water content. Would the tag's burying depth within fresh concrete affect its readability? The paper presents the preliminary results of our on-going investigation on the readability of RFID tags in concrete against water content and burying depth of tags.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1996년도 가을 학술발표회 논문집
• /
• pp.17-23
• /
• 1996

The objective of this study is to present the reference data about the influence of concrete properties using crushed sand, according to the change of powder content and grain shape. From the test results. We obtained that as powder content is increased, sand aggregate ratio, water content and S.P/C are increased in mixing design of concrete. The more powder content is the less slump and air content loss are decreased in fresh state, but the higher compressive strength and drying shrinkage are increased in hardened concrete state. As grain shape become round, water content is decreased in mixing design of concrete. And also, loss of slump and air content in fresh state, compressive strength in hardened state are increased.

• 한국건축시공학회지
• /
• 제23권2호
• /
• pp.143-152
• /
• 2023

본 연구에서는 굳지 않은 콘크리트의 단위수량 정밀 측정방법으로써 고주파가열법을 검토하기 위해 3가지의 대표적인 가열건조 시험방법에 사용되는 단위수량 추정식을 선정하고 계산의 원리 및 실제 시험과정에서 발생할 수 있는 오차 요인을 고찰하였다. 또한, 각 단위수량 추정식의 계산과정에서 고려될 수 없는 실험적 요인인 분체 및 골재의 구성비나 물리특성을 변화시킨 콘크리트에 대해 고주파가열법을 통한 굳지 않은 콘크리트의 단위수량 시험을 진행하였다. 고주파 가열법를 이용한 굳지 않은 콘크리트의 단위수량 시험방법은 ± 20kg/m³의 허용오차 범위를 대부분 만족하였으나, 추정식에 따라 경향 및 오차의 크기가 차이를 나타냈다. 웻스크리닝 과정에서 발생하는 시료 편차 또는 시료 샘플링 과정에서 발생하는 굵은골재채취량 편차로 인한 추정오차의 영향을 최소화하기 위해서는 가열 건조시 콘크리트 시료를 이용하고 이후 시료의 굵은골재의 채취량 편차를 추정식에서 보정하는 방법으로 추정한 단위수량이 가장 정확한 결과를 나타내는 것을 실내 배합시험을 통해 확인할 수 있었다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1994년도 가을 학술발표회 논문집
• /
• pp.133-136
• /
• 1994

This study is to investigate properties of the ultra high-strength concrete using silica rume and fly ash. For this purpose, the properties of fresh concrete and hardened concrete are examined with varing water-cement ratio, silica fume and fly ash content and so on. From these test results, it is possible to maunfacture the miximum strength of 1, 200kg/$\textrm{cm}^2$ with cement content 800kg/$\textrm{m}^3$, 18% water-cement ratio, 105 silica fume content.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 추계 학술발표회 제17권2호
• /
• pp.367-370
• /
• 2005

In this study, air meter method and capacitance measurement method to apply economically at quality control of ready-mixed concrete among various unit water content measurement technique was selected. Then, it was evaluated estimating performance of unit water content according to the change of water-binder ratio and unit water content. Also, it was examined influence about error occurrence of unit water content by change of properties of used materials. Finally, based on this study, it was proposed fundamental data to utilize measurement technique of unit water content to quality control. of ready-mixed concrete in construction field.

• 콘크리트학회지
• /
• 제10권3호
• /
• pp.23-29
• /
• 1998

• 한국건설순환자원학회논문집
• /
• 제10권1호
• /
• pp.101-110
• /
• 2022

본 연구에서는 고주파가열법, 단위용적질량법, 정전용량법 및 마이크로파법의 4가지의 굳지 않은 콘크리트의 단위수량 시험방법의 신뢰성을 검토하기 위해 배합요인, 혼화재 치환율 및 골재의 물리적 특성 변화에 따른 다양한 콘크리트를 대상으로 단위수량 실험을 실시하고 시험방법별 단위수량 추정값의 오차를 분석하였다. 단위수량의 시험방법과 무관하게 추정오차는 5 % 이하의 수준을 나타냈으며, 모르타르를 이용하는 시험의 경우 상대적으로 추정값의 오차가 크게 나타났다. 다양한 배합의 콘크리트에 대한 단위수량 실험결과를 토대로 각 실험방법별 추정오차를 모집단으로 하는 확률밀도함수를 분석한 결과 모르타르 시료를 이용하는 단위수량 실험방법은 추정오차 ± 15 kg/m³ 내 97 %, 콘크리트 시료를 이용하는 단위수량 실험방법은 추정오차 ± 10 kg/m³ 내 97 % 이상의 신뢰성을 나타냈다. 향후 실제현장에서 다양한 생산변수를 고려하여 단위수량 실험방법의 신뢰성을 추가적으로 검증할 수 있는 연구가 필요할 것으로 판단된다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 추계 학술발표회 제20권2호
• /
• pp.373-376
• /
• 2008

The objective of this study is to investigate the properties of fresh concrete with recycled fine aggregates. Three different kinds of fine aggregate with natural, high and low quality recycled aggregates were prepared. The concrete mixtures were produced with test parameters of replacement ratio of recycled fine aggregate. The properties of the fresh concrete were measured by means of slump and air content according to elapsed time. Quality control method to maintain the constant total mixing water for recycled aggregate concrete was suggested. The all concrete mixtures were produced with approximately the same slump on the job site after an hour. Test results indicated that compressive strength of the concrete mixtures with constant slump is not affected by the replacement ratio of recycled fine aggregate. Therefore, the practical way for the quality control of recycled aggregate concrete is to maintain the constant total mixing water.