• Journal of the Korean Applied Science and Technology
• /
• v.33 no.4
• /
• pp.795-801
• /
• 2016

This study is on the denitrification process using the sodium alginate and $CaCl_2$ as a flocculant. Removal techniques of nitrate nitrogen from waste water are reverse osmosis, ion exchange, electro dialysis and biological method etc. We tried to remove nitrate nitrogen with flocculation and sedimentation method in the present study. Calcium alginate is expected to form a chelate bond with nitrate nitrogen in the solution. So the effects of flocculantt component, flocculation reaction time, molar ratio of the flocculant, flocculant injection rate are studied to determine the best removal rate of nitrate nitrogen. In addition, we tried to determine the nitrate nitrogen removal mechanism by analyzing the structure and component ratio of the configuration after the agglutination precipitate by FE-SEM and EDS. As a result, the nitrate nitrogen removal mechanism is turned out to form calcium-nitro-alginate, and the best mole ratio of flocculating agent is 1 : 1, the injection rate of the flocculant was up to 2%, the removal rate of the nitrate nitrogen to be 56.7% in the synthetic wastewater.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.35 no.8
• /
• pp.1045-1050
• /
• 2006

Optimum operation condition for pilot scale of alkaline processing for fish muscle was investigated by measuring protein solubility, yield, texture, and water-holding capacity. Recovered protein yield was 33.2% for whole fish and 61.8% for minced muscle. Optimum homogenized speed and time, using industrial scale homogenizer, were 3,000 rpm and 5 min, respectively. Limited centrifugal force of continuous cylinder type was 4,000 rpm for recovering soluble protein, and 2,000 rpm for recovering precipitated proteins. The pH control agents such as citric acid, sodium phosphate and calcium oxide decreased the breaking force and deformation of recovered protein gel. The breaking force and deformation of the recovered proteins were high compared to conventional surimi. The breaking force and deformation were decreased by addition of salt, starch and bovine plasma proteins. Whiteness of recovered protein gel was lower than that of conventional surimi. Alkaline processing greatly decreased nitrogen content and chemical oxygen demand in waste water. The results suggest that alkaline processing has a potential as industrial production for recovering the proteins from fish muscle.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.485-488
• /
• 2008

Recycled fine aggregate has low quality because it contains large amount of old mortar. So, its usage is limited to a lower value-add, such as the roadbed material etc. Also, alkaline water occurred from treatment process of the waste concrete is becoming the cause of environmental problem. Accordingly, this study is to develop on the high quality recycled fine aggregate produced by low speed wet abraser using sulphuric. We investigated the properties of compressive strength of the mortar which was manufactured using recycled fine aggregate containing calcined gypsum produced by earlier mentioned process. Test results indicate that mortar using recycled fine aggregate containing calcined gypsum has lowest compressive strength. It seems that low compressive strength is closely associated with the expansion of the specimen by excessive formation of ettringite.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.769-772
• /
• 2008

The problem of disposing construction waste materials has become a national and social problem. Recycled powder generated in the process of making aggregate, and the recycled powder is land-filled in its entirety. Results of toxicity testing of recycled power show that it contains base-pair substituent mutagenicity. As recycled powder is disposed of as landfill, it can cause secondary contamination such as soil and underground water contamination. There has been very little research made on recycled powder. This study has examined the utilization of concrete mixture by using recycled powder in a mixture instead of cement and compared and analyzed the characteristics of dynamics and workability. This study has examined the application of recycled powder in concrete. Depending on the replacement rate and workability, test piece was manufactured using different mixing rate by CP, WCP, PCP. The CP was used to examine the physical property of concrete and characteristics its dynamics. The letters W of WCP and P of PCP are the initials of water and mixture. They were made using the standard mixing ratiosemphasizing the workability to determine the characteristic of dynamics of concrete based on the mixing ratio of recycled powder. With the increase in the replacement rate, CP had very little change in the strength. But with the decline of slump, the workability was not good. The result of manufacturing WCP and PCP using the standard mixing ratio showed that WCP had a drop in strength compared to the plain. PCP had almost the same value as the plain only when the replacement rate was 10%. When it was higher than that, a reduction in strength was observed.

• Journal of the Korean association of regional geographers
• /
• v.15 no.1
• /
• pp.1-15
• /
• 2009

This study aims to provide preliminary data needed for establishing policies on the environment and disasters of Goryeong county. The main results are as follows. First, the present master plan of the region does not reflect local socio-economic and environmental conditions and the local people's opinion. Second, The air conditions of Gyeongbuk province and Goryeong county are within the permitted limit of air pollution of Korea. Third, the analysis of water pollution index in Nakdong river system shows improvement of water quality in both Andong and Goryeong. Fourth, the conditions of waste collection and disposal are improved in both Gyeongbuk province and Goryeong county. Fifth, in case of environmental pollutant emitting facilities of Gyeongbuk province, the proportion of 1st to 4th grade(relatively much more environmental pollutant emitting quantity than 5th grade) tends to be increasing. Sixth, environmental pollutant emitting facilities of Goryeong county are remarkably increasing in Dasan, Gaegin, Ssangrim, involving industrial complex. Finally, in case of disasters, it is relatively stable in Yecheon, Gumi, Uiseong, Yeongju and Cheongdo, while relatively unstable in Seongju, Gunwi, Yeongcheon, Chilgok, Mungyeong, Bonghwa and Goryeong.

• Microbiology and Biotechnology Letters
• /
• v.32 no.2
• /
• pp.184-189
• /
• 2004

Rice wine cake (RWC) is the solid waste obtained after rice wine fermentation. For the mass production of the spores of yeast Saccharomyces from RWC, the optimum pretreatment condition of RWC, the optimum composition of culture medium, and the optimum culture condition were examined. For sporulation, yeast cells were grown in the pre sporulation medium (PSM), transferred into sporulation medium (SM) containing 1 % potassium acetate, and incubated in a rotary shaking incubator at $25^{\circ}C$ for 4 days. The supernatant of the mixture of RWC and water was used as the presporulation medium (PSM). The optimum temperature and time for the pre-incubation of the mixture of RWC and water (1:2) to obtain maximum sporulation yield were $V^{\circ}C$ and 24 hr, respectively, and optimum culture time in PSM was 48 hr. Using these optimum conditions, the asci number obtained was 0.72$ 1.06${\times}$10^{8}$$m\ell$. The addition of wheat coat koji into SM increased the final number of asci to beTEX>$10^{8}$ $m\ell$. Spores were formed in the SM with the initial pH of 7-11, but no spores were formed in the SM with the initial pH of 5. To save the time and effort to pretreat the RWC, 2% and 0.5% RWC without any pretreatment were directly added into PSM containing 1 % brown sugar and SM, respectively, and the maximum asci number of $1.27${\times}$10^{8}$ /$m\ell$ was obtained.

• Journal of Korean Society of Environmental Engineers
• /
• v.35 no.10
• /
• pp.756-762
• /
• 2013

The economical feasibility was conducted to find the adequate method to treat the dredged sediments from agricultural reservoirs in a pilot project that had been operated to improve the quality of water and benthic environments by dredging of contaminated sediments. For benefit/cost (B/C) analysis, the net expenses were considered as the costs of project, and the benefits were calculated from the saving of waste-treatment cost through reuse of dredged sediment, the saving of construction cost of settling pond, and the values of retained water by dredging. Although the economic feasibility depended on the sites of operation, the average B/C value of the pilot project was estimated as 1.32, indicating this project is economically feasible. Depending on the treatment methods, the B/C values were in the order of the methods of coagulating sedimentation, machinery dewatering, stabilization through exothermic reaction, and soil improvement and stabilization. The machinery dewatering method is estimated as the most adequate one to treat the dredged sediments because of the minimum riskiness of secondary pollution, the recyclability, and its economic feasibility.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.17 no.1
• /
• pp.1-7
• /
• 2014

This paper aims to explain the safety assessment and remediation mechanism of Granulated Coal Ash (GCA) as a material for the remediation of coastal sediments and to evaluate the improvement of the sediment in Kaita Bay, where GCA was applied. The concentrations of heavy metal contained in GCA and the dissolved amounts of heavy metal from GCA satisfied the criteria for soil and water pollution in Japan. The mechanisms on the remediation of coastal sediments using GCA is summarized as follows; (1) removal of phosphate and hydrogen sulfide (2) neutralization of acidic sediment (3) oxidation of reductive sediment (4) increase of water permeability (5) increase of soil strength (6) material for a base of seagrass. From the results obtained from the field experiment carried out in Kaita Bay, it was clarified that GCA is a promizing material for remediation of coastal sediment. This remediation technology can contribute to promote waste reduction in society and to decrease cost of coastal sediment remediation by applying GCA in other polluted coastal areas.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.35 no.2
• /
• pp.92-103
• /
• 1993

A sunday system with a horizontal bin-type composter was constructed and operated to evaluate its composting performance for four days for each test in October, 1992. A sundry system is one of popular systems for composting livestock manure, of which main benefit is to utilize unlimited, clean, and free solar radiation. A rectangular concrete bin(composter) with dimension of 300cm(length) X90cm(width) X60cm(height) was bedded alternatively with four lanes of aeration pipes and heating pipes, and was insulated at three walls with 50mm styrofoam. Each aeration pipe of a diameter of 25mm had 4mm perforated holes at every 15cm longitudinally, and supplied air of about 2m$^3$/min to the composter to maintain aerobic condition . A stirrer rotating at 1 rpm made one round trip every 20 minutes on the conveying chain along the the length of the composter. Five tests (Test 1~Test 5) were implemented to evaluate the composting effectiveness of a sundry system with a horizontal bin-type composter. Treatments of two levels of the mixture ratio of swine manure and paper sludge cakes(manure : paper sludge cakes= 1 : 4 and 1 : 2) and two levels of the water content(W/C ; 70% and 50%) were made to test the significance of the physicochemical properties for decomposition of the mixture materials. Temperature, C/N ratio, water content, microbial activity of the composting materials were taken measurements to evaluate its performance with the lapse of composting time for tests. A small-scale sundry system with a bin-type composter did not appear to be an appropriate system for composting livestock manure. Since heat generation by the composting materials could not overcome heat loss due to areation in a small-scale composter, a proper thermal enviroment could not be maintained to propagate massively thermopilic microorganism relatively in a short period of time. Different from the result of Chol et al.(1992) 6), a temperature variation of the composting materials did not show the peak clearly and C/N ratio didn't lower with time as expected. Mesophilic microoragnism seemed to play an important role for decomposition of the mixture materials. A sundry system with a bin-type composter may be good for a large-scale livestock farm household which may produce enough animal manure. Therefore a decision should be made very carefully to choose a system for composting livestock waste.

• Journal of Soil and Groundwater Environment
• /
• v.10 no.4
• /
• pp.54-61
• /
• 2005

An aquifer thermal energy storage (ATES) system can be very cost-effective and renewable energy sources, depending on site-specific parameters and load characteristics. In order to develop the ATES system which has certain hydrogeological characteristics, understanding the thermohydraulic process of an aquifer is necessary for a proper design of an aquifer heat storage system under given conditions. The thermohydraulic transfer for heat storage was simulated according to two sets of simple pumping and waste water reinjection scenarios of groundwater heat pump system operation in a two-layered aquifer model. In the first set of the scenarios, the movement of the thermal front and groundwater level was simulated by changing the locations of injection and pumping wells in a seasonal cycle. However, in the second set the simulation was performed in the state of fixing the locations of pumping and injection wells. After 365 days simulation period, the shape of temperature distribution was highly dependent on the injected water temperature and the distance from the injection well. A small temperature change appeared on the surface compared to other simulated temperature distributions of 30 and 50 m depths. The porosity and groundwater flow characteristics of each layer sensitively affected the heat transfer. The groundwater levels and temperature changes in injection and pumping wells were monitored and the thermal interference between the wells was analyzed to test the effectiveness of the heat pump operation method applied.