• 한국건설순환자원학회논문집
• /
• 제5권1호
• /
• pp.97-102
• /
• 2010

본 연구에서는 폐식용유에 의한 고강도 모르터의 기초적 및 자기수축 특성을 팽창재, 수축저감제를 사용한 경우와 비교 분석하였는데, 그 결과는 다음과 같다. 유동성은 폐식용유의 경우 Plain에 비해 다소 적게 나타났고, 치환율의 증가에 따라서도 감소하였다. 반면, 수축저감제는 Plain보다 증가하는 것으로 나타났고, 팽창재는 치환율의 증가에 따라 증가하는 경향을 나타내었다. 압축강도의 경우 폐식용유 및 수축저감제에서는 상호 유사한 경향을 나타내었는데, 초기 재령에서는 플레인 배합에 비해 다소 작은 값을 나타내었지만, 재령 91일에서는 거의 유사한 강도를 나타내었으며, 팽창재는 전반 재령에서 모두 Plain보다 높은 강도를 나타내었다. 자기수축 특성을 볼때 수축저감제, 폐식용유, 팽창재 순으로 수축저감효과가 양호한 것으로 나타났는데, 특히 폐식용유의 자기수축 저감효과는 수축저감제와 큰 차이를 보이지 않았고, 팽창재에 비해 양호한 것을 알 수 있었다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.869-874
• /
• 2003

The atomization characteristics were investigated through the influence of the change of GLR and the change of working fluid on droplet size distribution and mean diameter of drop produced by effervescent atomizer. For simultaneous injection of water and high viscous waste vegetable oil, effervescent atomizer with two aerator tubes was specially designed. From the experimental results, regardless of mass fraction of vegetable oil in working fluids, it is expected that effervescent atomizer will exhibit excellent atomization performance at the high GLR conditions.

• Journal of the Korean Wood Science and Technology
• /
• 제39권6호
• /
• pp.498-504
• /
• 2011

The purpose of this study was to investigate and develop an eco-frendly wood adhesive based on vegetable oil (especially soybean oil), the renewable and sustainable natural resources, using ozonification technology for the chemical structure modification. The waste soybean oil (WSBO) was reacted with $O_3$ at the rate of $450m{\ell}$(acetone) : $50m{\ell}$ (WSBO) for different times, 1, 2, 3 hrs. The investigation of the modified chemical strecture of the ozonied WSBOs were conducted using FT-IR. As ozonification time increased, the peak of the unsaturated double bonds was disappeared especially ozonized-3hrs and aldehyde or carboxyl peak appeared because ozonification broke the oil into small molecules. The plywood were made at $150^{\circ}C$ with 4 minutes hot-press time using the different ozonized 3 hrs WSBO/pMDI adhesives and were tested for the dry, wet, cyclic boil test according to the Korea Industrial Standard F3101 Ordinary plywood. The bond strengths gradually increased until 1 : 0.5~1 : 3, but it decreased 1 : 4, as the contents of pMDI increased. The results of the dry, wet and cyclic bond strengths the equivalent ratio was formed approximately between 1 : 2~1 : 3. And the 1 : 1~1 : 4 strengths met constantly the standard requirement of 7.0kgf/$cm^2$ (KS F3101). From the comprehensive view on the results of above experiment, it could be confirmed that ozonized WSBO/pMDI has characteristics of effective reactivity and wet stability showed as an excellent candidate of wood adhesive applications.

• Tribology and Lubricants
• /
• 제35권2호
• /
• pp.132-138
• /
• 2019

In this study, we demonstrate the effects of the acidic properties of montmorillonite (MMT), which is commonly used as a catalyst, on the conversion and selectivity of the dimer acid methyl ester (DAME) synthesis. We synthesize DAME by the dimerization of conjugated linoleic acid methyl ester (CLAME) and oleic acid methyl ester using MMT KSF. Incidentally, trimer acid methyl ester was formed as a by-product during the DAME synthesis. There is a necessity to adequately adjust the strength and quantity of the acid site to control the selectivity of DAME. Therefore, we vary the pH of the MMT acid by using various metal hydroxides. The purpose of this study is to increase the yield of monocyclic dimer acid methyl ester, which is a substance with adequate physical properties for industrial applications (e.g., lubricant and adhesive, etc.), using a heterogeneous catalyst. We report the dimerization of fatty acid methyl ester by using base treated-KSF, and apply it to conjugated soybean oil methyl ester. Then, we transmute the acid site properties of KSF, such as pH of 5 wt.% slurry KSF and various alkali metals (Li, Na, K, Ca). Characterization of base treated-KSF using a pH meter, x-ray diffraction, inductively coupled plasma-atomic emission spectrometer, Brunauer-Emmett-Teller surface analysis, and temperature-programmed desorption. We conduct an analysis of CLAME and DAME using nuclear magnetic resonance spectroscopy, gas chromatography, and gel permeation chromatography. Through these experiments, we demonstrate the effects of the acidic properties of KSF on the conversion and selectivity of the DAME synthesis, and evaluate its industrial potential by application to waste vegetable oil.

• 한국응용과학기술학회지
• /
• 제30권1호
• /
• pp.35-48
• /
• 2013

바이오디젤은 식물성유지, 동물성유지 그리고 폐식용유를 전이에스테르화 반응을 시켜 만들어진 것으로 경유를 대체할 수 있는 연료이다. 본 연구에서는 다양한 원료의 식물성유지 (대두유, 폐식용유, 유채유, 면실유, 팜유)로부터 얻어진 바이오디젤의 연료 특성을 알아보았다. 다양한 식물성유지 원료로부터 얻어진 바이오디젤은 지방산메틸에스테르 함량, 동점도, 인화점, 필터막힘점, 글리세린 함량을 분석하였다. 바이오디젤의 품질기준과 시험방법은 한국 표준과 유럽 표준인 EN14214에 따라 시험하였다. 대두유, 폐식용유, 유채유, 면실유 바이오디젤은 불포화지방산이 많이 포함되어 있는 반면에 팜유 바이오디젤은 포화지방산이 많이 함유되어 있다. 저온특성, 동점도, 산화안정도와 같은 바이오디젤의 연료 특성은 지방산메틸에스테르의 구성 성분과 관련이 깊다.

• Journal of the Korean Wood Science and Technology
• /
• 제39권4호
• /
• pp.359-369
• /
• 2011

본 연구에서는 국내 수종 중 낙엽송(Larix kaemferi Carr)을 대상으로 하여 콩기름, 폐콩기름, 오존산화 콩기름, 오존산화 폐콩기름을 첨가하여 제조된 목재펠릿의 특성변화를 조사하였다. 제조된 펠릿의 함수율, 발열량, 회분, 겉보기밀도, 내구성, 흡습률, 원소분석을 측정하여 비교하였다. 펠릿제품의 함수율은 7.66~9.48%로 나타나 목재펠릿의 품질기준 1급인 10% 이하를 만족시켰고, 제조된 각 펠릿의 발열량 측정결과 품질기준(1급) 4,300 kcal/kg을 모두 넘었으며, 기름을 첨가한 모든 펠릿이 대조구보다 높은 발열량을 나타냈다. 회분은 0.34~0.42%로 품질규격 1급인 0.7% 미만의 범주에 속한 것으로 나타났으며, 제조된 펠릿 모두가 겉보기 밀도 품질 기준 1급(640 kg/$m^3$)을 만족시켰다. 내구성은 콩기름을 첨가한 펠릿, 오존산화 폐콩기름을 첨가한 펠릿이 품질 기준1급(97.5% 이상)을 만족하였다. 전체적인 결과의 흐름을 보았을 때 첨가제를 첨가한 펠릿이 무첨가 펠릿보다 내구성이 좋게 나타났다. 흡습률은 24시간 후 흡습률 시험에서 첨가제를 첨가한 펠릿이 모두 무첨가 펠릿보다 낮은 흡습률을 나타냈으며, 5일 경과 후에도 무첨가 펠릿 보다 첨가제를 첨가한 펠릿이 모두 흡습률 감소 현상을 보였다. 원소분석은 황의 함유량이 목재펠릿의 품질기준 1급(0.05%) 이하를 만족시켰고, 질소 함유량 역시 목재펠릿의 품질기준 1급(0.3%) 이하를 만족시켰다.

• Tribology and Lubricants
• /
• 제31권5호
• /
• pp.195-204
• /
• 2015

Several researches are focused on improving the value of fine chemicals based on biomass resources due to environmental and other concerns associated with the use of petroleum-based products. Therefore, the synthesis and application of estolides derived from plant-based waste oil materials and their application as lubricants and as processing oil for butyl rubber products have been studied. Four kinds of estolide were prepared with conversions of 71~92% over 24h using various vegetable oils, as determined by size exclusion chromatography (SEC) and nuclear magnetic resonance (NMR) spectroscopy. FT-IR spectroscopy determines the esterification of estolides using 2-ethylhexyl alcohol. The estolides have iodine values of 35~90, α-ester/α-acid ratios of 0.45~0.55, and total acid number of 114~134 mg KOH g^–1. Four ball wear tests show that the wear scar diameters (WSDs) of estolides as base oil significantly decreased to 0.328~0.494 mm, compared to WSDs of 0.735 and 0.810 mm of WSD for 150N and Yubase 6, respectively, as general base oil. Thus, the estolides have better wear resistance and satisfying design objectives for the engineering of a variety of lubricant base oils.

• KSBB Journal
• /
• 제24권1호
• /
• pp.89-95
• /
• 2009

Biodiesel (fatty acid alkyl esters), which is produced from sustainable resources such as vegetable oil, animal fat and waste oils, have used to as substitutes for petro-diesel. In this study, we investigate the performance of 30 L and 300 L pilot-scale biodiesel production system using alkali-catalyst transesterification from soybean oil and rapeseed oil produced at Jeju island in Korea. The 30 L-scale biodiesel production was performed to in the condition of reaction temperature $65^{\circ}C$, catalyst amount 1% (w/w) and oil to methanol molar ratio 1 : 8. At that reaction condition, the fatty acid methyl ester contents of product are above 98% within reaction time 30 min. Also, the conversion yield of over 98% was obtained in 300 L-scale biodiesel production system using rapeseed oil and soybean oil. The quality of biodiesel produced from reaction system was satisfied to recommended quality standard of Korea. Our results may provide useful information with regard to the scale-up of more economic and efficient biodiesel production process.

• 한국자원식물학회지
• /
• 제25권5호
• /
• pp.624-632
• /
• 2012

본 연구는 주요 구성지방산이 Oleic acid인 유채유, 동백유, 올리브유와 Palmitic acid가 주요 구성 지방산인 팜유를 기준으로 중량비로 혼합하여 지방산 조성 및 물성변화를 관찰 하였다. 지방산 조성의 변화를 전체적으로 살펴보면 50:50(w/w)비율에서는 Oleic acid은 유채유와 대두유의 혼합 시 42.8%로 가장 낮았고 동백유와 유채유의 혼합비율에서 72.1%로 가장 높았다. 75:25(w/w)유채유와 대두유 혼합비율에서 가장 낮았고 동백유와 올리브유의 혼합비에서 가장 높았다. 팜유를 기준으로 식물성 유지를 혼합하였을 시에는 다른 유지와 혼합 후 총 포화지방산은 감소하였다. 혼합 후 지방산 조절을 통한 산화안정성 및 저온에서의 유동성 개선이 기대 된다. 혼합 후 동백유 > 올리브유 > 유채유 순으로 산가 안전화 경향을 보였으며 이는 Oleic acid 함량에 따라 기인한 것으로 보인다. 또한 혼합을 통한 산화안정성을 개선시킬 수 있을 것으로 판단되며, 색도는 비율 및 유지에 따른 유의적인 변화를 보이지는 않았으나 바이오디젤 생산 정제공정에 있어서 혼합비율 조절에 따른 정제비용 절감이 기대 된다. 본 연구를 통하여 유지간 혼합에 의한 특성변화를 확인하고, 혼합유의 원료 다양성 확보 및 품질개선을 위한 정보를 얻어 향후 연구수행의 기초자료로 활용이 가능할 것으로 생각된다.

• Membrane and Water Treatment
• /
• 제8권1호
• /
• pp.19-34
• /
• 2017

Boron exists in dilute concentrations in sea water, ground water and waste waters. Reactive liquid extraction can be used for removing boron to make the treated water suitable for drinking and irrigation, with its final concentration less than 0.5 ppm. The results of equilibrium experiments are reported on the removal of boron using 2-butyl-2-ethyl-1, 3-propanediol (BEPD as a nonionic carrier) in sunflower oil, a non-traditional solvent. The results of removal of boron from aqueous solutions in the concentration range 0.5-20 ppm are presented. It is shown that this new liquid membrane system, is able to remove boron from ground waters at their natural pH of 6-8 (without any chemical addition for pH adjustments). The removal efficiency is good when the process is upgraded to a hollow-fibre membrane contactor and approximately 45% boron can be removed in a single-stage contact. There are additional advantages of this new approach that includes reduced operational health and safety and environmental issues. The results reported here provide guidelines to the development of boron removal process using renewable, biodegradable, safe and cheap solvent system such as sunflower oil.